HackMD
tags: 程式組教程
Mecanum Drive Odometry
A user can use the mecanum drive kinematics classes in order to perform odometry. WPILib contains a MecanumDriveOdometry class that can be used to track the position of a mecanum drive robot on the field.
Note：
Because this method only uses encoders and a gyro, the estimate of the robot’s position on the field will drift over time, especially as your robot comes into contact with other robots during gameplay. However, odometry is usually very accurate during the autonomous period.
Chinese
perform 執行
estimate 估計
drift 飄移
accurate 精準的
period 其間
Creating the odometry object
The MecanumDriveOdometry class requires two mandatory arguments and one optional argument. The mandatory arguments are the kinematics object that represents your mecanum drive （in the form of a MecanumDriveKinematics class） and the angle reported by your gyroscope （as a Rotation2d）. The third optional argument is the starting pose of your robot on the field （as a Pose2d）. By default, the robot will start at x = 0, y = 0, theta = 0.
Note：
0 degrees / radians represents the robot angle when the robot is facing directly toward your opponent’s alliance station. As your robot turns to the left, your gyroscope angle should increase. By default, WPILib gyros exhibit the opposite behavior, so you should negate the gyro angle.
Chinese
mandatory 強制的
mandatory 參數
optional 可選的
represents 代表
reported 回傳
API
Constructor and Description：
Translation2d( double x, double y )
Explanation：
The X and Y values are derived from
their respective relative distances from the chassis
i.e. Assume the center of the site as the origin
----------
Constructor：
MecanumDriveOdometry(
MecanumDriveKinematics kinematics,
Rotation2d gyroAngle,
Pose2d initialPoseMeters
)
Description：
Constructs a MecanumDriveOdometry object.
----------
Constructor：
Pose2d(double x, double y, Rotation2d rotation)
Description：
Convenience constructors that takes in x and y values directly
instead of having to construct a Translation2d.
----------
Constructor：
Rotation2d()
Description：
Constructs a Rotation2d with a default angle of 0 degrees.
JAVA
// Locations of the wheels relative to the robot center.
Translation2d m_frontLeftLocation = new Translation2d( 0.381, 0.381 );
Translation2d m_frontRightLocation = new Translation2d( 0.381, -0.381 );
Translation2d m_backLeftLocation = new Translation2d( -0.381, 0.381 );
Translation2d m_backRightLocation = new Translation2d( -0.381, -0.381 );
// Creating my kinematics object using the wheel locations.
MecanumDriveKinematics m_kinematics = new MecanumDriveKinematics(
m_frontLeftLocation,
m_frontRightLocation,
m_backLeftLocation,
m_backRightLocation
);
// Creating my odometry object from the kinematics object.
// Here, our starting pose is 5 meters along the long end of the field
// and in the center of the field along the short end, facing forward.
MecanumDriveOdometry m_odometry = new MecanumDriveOdometry(
m_kinematics,
getGyroHeading(),
new Pose2d( 5.0, 13.5, new Rotation2d() )
);
C++
// Locations of the wheels relative to the robot center.
frc::Translation2d m_frontLeftLocation{ 0.381_m, 0.381_m };
frc::Translation2d m_frontRightLocation{ 0.381_m, -0.381_m };
frc::Translation2d m_backLeftLocation{ -0.381_m, 0.381_m };
frc::Translation2d m_backRightLocation{ -0.381_m, -0.381_m };
// Creating my kinematics object using the wheel locations.
frc::MecanumDriveKinematics m_kinematics{
m_frontLeftLocation,
m_frontRightLocation,
m_backLeftLocation,
m_backRightLocation
};
// Creating my odometry object from the kinematics object.
// Here, our starting pose is 5 meters along the long end of the field and
// in the center of the field along the short end, facing forward.
frc::MecanumDriveOdometry m_odometry{
m_kinematics,
GetGyroHeading(),
frc::Pose2d{ 5_m, 13.5_m, 0_rad }
};
Updating the robot pose
The update method of the odometry class updates the robot position on the field. The update method takes in the gyro angle of the robot, along with a MecanumDriveWheelSpeeds object representing the speed of each of the 4 wheels on the robot. This update method must be called periodically, preferably in the periodic() method of a Subsystem. The update method returns the new updated pose of the robot.
Note：
The MecanumDriveWheelSpeeds class in Java must be constructed with each wheel speed in meters per second. In C++, the units library must be used to represent your wheel speeds.
Chinese
takes in
along with 隨著
periodically 定期的
preferably 最好
constructed 建構
API
Modifier and Type：
double
Method：
getRate()
Description：
Return the rate of rotation of the yaw （Z-axis） gyro, in degrees per second.
----------
Modifier and Type：
static Rotation2d
Method：
fromDegrees( double degrees )
Description：
Constructs and returns a Rotation2d with the given degree value.
Method Details：
public static Rotation2d fromDegrees(double degrees)
Constructs and returns a Rotation2d with the given degree value.
Parameters:
degrees - The value of the angle in degrees.
Returns:
The rotation object with the desired angle value.
----------
Modifier and Type：
getAngle()
Description：
Returns the total accumulated yaw angle （Z Axis, in degrees） reported by the sensor.
JAVA
@Override
public void periodic() {
// Get my wheel speeds
var wheelSpeeds = new MecanumDriveWheelSpeeds(
m_frontLeftEncoder.getRate(),
m_frontRightEncoder.getRate(),
m_backLeftEncoder.getRate(),
m_backRightEncoder.getRate()
);
// Get my gyro angle.
// We are negating the value because gyros return positive
// values as the robot turns clockwise.
// This is not standard convention that is used by the WPILib classes.
var gyroAngle = Rotation2d.fromDegrees( -m_gyro.getAngle() );
// Update the pose
m_pose = m_odometry.update( gyroAngle, wheelSpeeds );
}
C++
void Periodic() override {
// Get my wheel speeds
frc::MecanumDriveWheelSpeeds wheelSpeeds{
units::meters_per_second_t(m_frontLeftEncoder.GetRate()),
units::meters_per_second_t(m_frontRightEncoder.GetRate()),
units::meters_per_second_t(m_backLeftEncoder.GetRate()),
units::meters_per_second_t(m_backRightEncoder.GetRate())
};
// Get my gyro angle. We are negating the value because gyros return positive
// values as the robot turns clockwise. This is not standard convention that is
// used by the WPILib classes.
frc::Rotation2d gyroAngle{
units::degree_t( -m_gyro.GetAngle())
};
// Update the pose
m_pose = m_odometry.Update( gyroAngle, wheelSpeeds );
}
Resetting the Robot Pose
The robot pose can be reset via the resetPose method. This method accepts two arguments – the new field-relative pose and the current gyro angle.
Important：
If at any time, you decide to reset your gyroscope, the resetPose method MUST be called with the new gyro angle.
In addition, the GetPose （C++） / getPoseMeters （Java） methods can be used to retrieve the current robot pose without an update.
Chinese
via 通過
retrieve 取回
