prepend_path (”PATH”, “/path/to/pkg/bin”)

    prepend to a path-like variable the value.

prepend_path (”PATH”, “/path/to/pkg/bin”, “delim”)

    prepend to a path-like variable the value. It is possible to add a third argument to be the delimiter. By default is is “:”, the delimiter can be any single character for example “ “ or “;”

prepend_path {”PATH”, “/path/to/pkg/bin”, delim=”delim”, priority=*num*}

prepend to a path-like variable the value. One can use this form with braces {} instead of parens () to specify both a priority a non-default delimiter.

append_path (”PATH”, “/path/to/pkg/bin”)

    append to a path-like variable the value.

append_path (”PATH”, “/path/to/pkg/bin”, “delim”)

    append to a path-like variable the value. It is possible to add a third argument to be the delimiter. By default is is “:”, the delimiter can be any single character for example “ “ or “;”

append_path {”PATH”, “/path/to/pkg/bin”, delim=”delim”, priority=*num*}

    append to a path-like variable the value. One can use this form with braces {} instead of parens () to specify both a priority a non-default delimiter.

remove_path (”PATH”, “/path/to/pkg/bin”)

    remove value from a path-like variable for both load and unload modes.

remove_path (”PATH”, “/path/to/pkg/bin” , “delim”)

    remove value from a path-like variable for both load and unload modes. It is possible to add a third argument to be the delimiter. By default is is “:”, the delimiter can be any single character for example “ “ or “;”

setenv (“NAME”, “value”)

    assigns to the environment variable “NAME” the value. Do not use this function to assign the initial to a path-like variable. Use append_path or prepend_path instead.

pushenv (“NAME”, “value”)

    sets NAME to value just like setenv. In addition it saves the previous value in a hidden environment variable. This way the previous state can be returned when a module is unloaded. pushenv (“FOO”,false) will clear “FOO” and the pop will return the previous value.

add_property (“NAME”, “value”)

    See Module Properties for how to use this function.

remove_property (“NAME”, “value”)

    See Module Properties for how to use this function.

unsetenv (“NAME”)

    unset the value associated with “NAME”. This command is a no-op when the mode is unload.

whatis (“STRING”)

    The whatis command can be called repeatedly with different strings. See the Administrator Guide for more details.

help ( [[ help string ]])

    What is printed out when the help command is called. Note that the help string can be multi-lined.

pathJoin (“/a”, “b/c/”, “d/”)

    builds a path: “/a/b/c/d”, It combines any number of strings with one slash and removes excess slashes. Note that trailing slash is removed. If you need a trailing slash then do pathJoin(“/a”, “b/c”) .. “/” to get “/a/b/c/”.

depends_on (“pkgA”, “pkgB”, “pkgC”)

    Loads all modules. When unloading only dependent modules are unloaded. See Dependent Modules for details.

load (“pkgA”, “pkgB”, “pkgC”)

    load all modules. Report error if unable to load.

load_any (“pkgA”, “pkgB”, “pkgC”)

    loads the first module found. Report error if unable to load any of the modules. When unloading all modules are marked to be unloaded.

try_load (“pkgA”, “pkgB”, “pkgC”)

    load all modules. No errors reported if unable to load. Any other errors will be reported.

complete (“shellName”,”name”,”args”)

    Bash and tcsh support the complete function. Note that the shellName must match the name of the shell given on the Lmod command. There is no error if the shell names do not match. The command is ignored. See rt/complete/mf/spack/1.0.lua for an example.

source_sh (“shellName”,”shell_script arg1 …”)

    source a shell script as part of a module. Supported shellNames are sh, dash, bash, zsh, csh, tcsh, ksh. When loading, Lmod automatically converts the shell script into module commands and saves the module commands in the environment. It does this by sourcing the shell script string in a subshell and comparing the environment before and after sourcing the shell script string. When unloading, the saved module commands from the environment are used.

    Note that shell script string must not change between loading and unloading as the full string is used to reference the saved module commands.

    Other shells could be supported with help from the community that uses that shell. (New in version 8.6)

    This feature was introduced in Tmod 4.6 and was shamelessly studied and re-implemented in Lmod 8.6+.

LmodBreak (msg)

    LmodBreak() modulefile function causes the evaluation of the current modulefile to stop and all changed in the user’s environment to be ignored from the current modulefile. However, all other modulefiles are evaluated. In TCL modulefiles it is break.

    In other words, this function does not stop, where as LmodError() stops all evaluations. New in Lmod 8.6+

    Note As of Lmod 8.6.16: LmodBreak() does nothing when unloading.

userInGroups (“group1”, “group2”, …)

    Returns true if user is root or a member of one of the groups listed.

mgrload (required, active_object)

    load a single module file. If required is true then error out if not found. If false then no message is generated. Returns true if successful. See Using mgrload function for details.

always_load (“pkgA”, “pkgB”, “pkgC”)

    load all modules. However, when this command is reversed, it does nothing.

set_alias (“name”, “value”)

    define an alias to name with value.
unload (“pkgA”, “pkgB”)

    In both load and unload mode, the modulefiles are unloaded. It is not an error to unload modules that where not loaded.

family (“name”)

    A user can only have one family “name” loaded at a time. For example family(“compiler”) would mean that a user could only have one compiler loaded at a time.

prereq (“name1”, “name2”)

    The current modulefile will only load if all the listed modules are already loaded.

prereq_any (“name1”, “name2”)

    The current modulefile will only load if any of the listed modules are already loaded.

conflict (“name1”, “name2”)

    The current modulefile will only load if all listed modules are NOT loaded.

extensions (“numpy/2.1, scipy/3.2, foo/1.3”)

    This module provides the following extensions. Place the list of extensions as a single string.

requireFullName ()

    This function throws an error if module name specified by the user is not the fullName. Typically used as:

    if (mode() == "load") then requireFullName() end

haveDynamicMPATH ()

    This function tells that Lmod that this module has a dynamic $MODULEPATH when building the spider cache. See The spider tool for details.

Extra functions

The entries below describe several useful commands that come with Lmod that can be used in modulefiles.

os.getenv (“NAME”)

    Get the value for the environment variable called “NAME”. Note that if “NAME” is not set in the environment, then it is probably best to do:

    local foo=os.getenv("FOO") or ""

    otherwise foo will have the value of nil.

os.exit(number)

    Exits a modulefile. Note that no environment variables are changed when this command is evaluated.

capture (“string”):

    Run the “string” as a command and capture the output. This function uses the value of LD_PRELOAD and LD_LIBRARY_PATH found when Lmod is configured. Use subprocess if you wish to use the current values. There may be a trailing newline in the result which is your responsibility to remove or otherwise handle.:

    local nprocs = capture("nprocs"):gsub("\n$","")

subprocess (“string”)

    Run the “string” as a command and capture the output. There may be a trailing newline in the result which is your responsibility to remove or otherwise handle.

isFile (“name”)

    Returns true if “name” is any file type except directory.

isDir (“name”)

    Returns true if “name” is a directory.

splitFileName (“name”)

    Returns both the directory and the file name. local d,f=splitFileName("/a/b/c.ext"). Then d="/a/b", f="c.ext"

LmodMessage (“string”, …)

    Prints a message to the user.

LmodWarning (“string”, …)

    Prints a warning message to the user.

LmodError (“string”, “…”)

    Print Error string and exit without loading the modulefile.

    Note that LmodError() is treated as a warning when unloading as of Lmod 8.6.16

mode ()

    Returns the string “load” when a modulefile is being loaded, “unload” when unloading, and “spider” when a modulefile is processed builting the spider cache which is used by module avail and module spider.

isloaded (“NAME”)

    Return true when module “NAME” is loaded or is in the middle of a load. Use isPending() to distinguish between loaded or pending.

isPending (“NAME”)

    Return true when module “NAME” is in the middle of a load(). This function is rarely needed. It can be useful when checking if one depends_on() package is currently being loaded.

isAvail (“NAME”)

    Return true when “NAME” is possible to load. Note that it probably better to use the try_load () instead:

    if ( not isloaded("foo") ) then try_load("foo") end

LmodVersion ()

    The version of lmod.

convertToCanonical (“string”):

    A modulefile can use this function to know if an Lmod feature is supported:

    if (convertToCanonical(LmodVersion()) < convertToCanonical("8.6") ) then
      LmodMessage("The function source_sh() is not supported")
    end

execute {cmd=”<any command>”, modeA={“load”}}

    Run any command with a certain mode. For example execute {cmd=”ulimit -s unlimited”,modeA={“load”}} will run the command ulimit -s unlimited as the last thing that the loading the module will do.

Lua functions not supported

dofile ()

    This function is not supported in Lmod. Use require() or loadfile() or loadstring()

Lua functions

    require (): An Lua module can use this function to source another lua file.

    loadfile (): An Lua module can use this function to source another lua file.

    loadstring (): An Lua module can use this function to evaluate a string that contains Lua code. Note that in Lua 5.1 this function is called loadstring. The same function is renamed to load in Lua 5.2+. However Lmod uses the load function to load other modules. Therefore internal to Lmod, sites can use loadstring () independent of which version of Lmod a site is using.

Modifier functions to prereq(), conflicit() and load()

atleast (“name”, “version”)

    This modifier function will only succeed if the module is “version” or newer. See the between function for adding a “<” to modify the search criteria.

between (“name”, “v1”, “v2”): This modifier function will only

    succeed if the module’s version is equal to or between “v1” and “v2”. Note that version “1.2” is the same as “1.2.0.0.0….”. This means that between(“foo”,”2.7”,”3.0”) would include “foo/3.0” but not “foo/3.0.0.1”. You can add a “<” to either the lower or upper version boundary to specify less than instead of “<=”. So between(“foo”,”2.7<”,”<3.0”) would want any module greater than 2.7 and less than 3.0.

latest (“name”)

    This modifier function will only succeed if the module has the highest version on the system.

atmost (“name”,”version”)

    This modifier function will only succeed if the module is “version” or older. See the between function for adding a “<” to modify the search criteria.

Introspection Functions

The following functions allow for more generic modulefiles by finding the name and version of a modulefile.

myModuleName ()

    Returns the name of the current modulefile without the version.

myModuleVersion ()

    Returns the version of the current modulefile.

myModuleFullName ()

    Returns the name and version of the current modulefile.

myModuleUsrName ()

    Returns the name the user specified to load a module. So it could be the name or the name and version.

myFileName ()

    Returns the absolute file name of the current modulefile.

myShellName ()

    Returns the name of the shell the user specified on the command line.

myShellType ()

    Returns the shellType based on the name of the shell the user specified on the command line. It returns sh for sh, bash, zsh, csh for csh, tcsh. Otherwise it is the same as myShellName ().

hierarchyA (“fullName”, level)

    Returns the hierarchy of the current module. See the section on Generic Modules for more details.

Math Functions

math.floor (): math floor function

math.ceil (): math ceil function

math.max (): math max function

math.min (): math min function

Special Functions

inherit (): imports the contents of exact same name module also

    found in the module tree. (See A Personal Hierarchy Mirroring the System Hierarchy for an explanation.)
‵‵‵