# Quick Guide on Linksys RE6300 Setup

If you've ever set up a wireless router, you'll understand how critical it is to have access to the login page. This will not only give you access to the settings management wizard, but it will also make it easier to configure your network settings. When you want to get to the Linksys extender login page. You can easily do this by using the default web address or the IP address. However, knowing how to proceed with the network configuration is critical. This blog will walk you through the process of getting to the [Linksys RE6300 Setup](https://www.wirelessextendersetup.org/linksys-wifi-extender-setup-re6300/) and Login page.

**What You Should Know**

Before you begin the login procedure, you must have your device's default settings. You can find information such as the username and password, the default IP address, and the paraphrase on the device's product label.

Aside from these, you'll also need the password and username for the main router network. Once you have these, you can easily complete the Linksys re6300 setup process.

**Starting with the Linksys RE6300 Extender Setup-**

It is critical that you connect and power your devices before proceeding with the setup process. Connecting your computer or smartphone to the device network is the next step in the process. After that, you can use the settings wizard to complete the network configuration process. Here are a few steps you can take:

1. Connect your extender to the router using an Ethernet cable. Connect the power adapter cables to the devices, then insert any batteries and turn them on.
1. Meanwhile, connect the primary DSL line to the router. If you're using a MODEM, make sure it's connected to the main router before you start.
1. Wait for all of your connected devices to boot up and for the status LEDs to display their intended status.
1. If you want to use a wireless connection, connect your Linksys extender to the power plug near the main router to avoid disrupting the connection. You'll then need to connect them using either the WPS method or the manual setup method.
1. Open the network settings on your computer or smartphone once your devices are ready. Connect to the Linksys RE6300 extender network as well. Correspond to the SSID shown on the device's product label and press the Connect button.
Note: If you are unable to connect to your range extender network or do not see the SSID in the available networks section, ensure that the range extender's wireless is turned on. If this is the case, you can restart the device once. If that does not solve the problem, reset the device to factory settings and try again.

**Configuring Network Options-**

The Linksys extender setup wizard will validate the information you entered before redirecting you to the main settings management wizard. You can then easily proceed to the network settings section. Here are a few steps you can take:

1. The Linksys extender configuration wizard will search for available router networks. A list of the same will appear on the screen. Click on the one that corresponds to your primary router, then enter the network password and press the Join button. If you have a dual-band device, you must connect to the 5GHz band as well.
1. The setup wizard will save your information and prompt you to create a username and password for your extender network. After you've assigned an SSID and password to both network bands, click the Next button.
1. Next, enter an admin username and password for your Linksys extender and click the Save button.
1. The final setup screen displays a summary of the network settings you just configured. You can go over everything again before clicking the Save and Finish buttons.
1. Your Linksys RE6300 range extender's network settings have now been saved, and you can connect your wireless-enabled device to the network.
That’s All! Hopefully, with these steps, you can easily perform the [Linksys re6300 setup](https://www.wirelessextendersetup.org/linksys-wifi-extender-setup-re6300/). After that, you can enjoy a seamless high-speed internet connection in the dead zones of your home or workplace.

**Also Checkout our useful links-**

1. [Linksys WiFi Extender Setup](https://www.wirelessextendersetup.org/linksys-wifi-extender-setup/)
1. [Linksys RE7000 setup](https://www.wirelessextendersetup.org/linksys-re7000-setup/)
1. [Linksys extender setup without computer](https://www.wirelessextendersetup.org/linksys-extender-setup-without-computer/)
1. [Linksys RE7000 Reset](https://www.wirelessextendersetup.org/linksys-re7000-reset/)
1. [Linksys extender login](https://www.wirelessextendersetup.org/linksys-extender-login/)