Try   HackMD

Youtube DownloadErm ver1.02.1 (ver2.0 Preview現已推出)

此應用程式僅適用於 Windows 系統
ver1.02.1 Download
Video DownloadErm ver2.0 Preview
解壓縮密碼:neurosama
因為有密碼，所以不能用windows內建的解壓縮呦~★

可以使用以下工具來解壓縮：
1. WinRAR（支援 ZIP、RAR 等格式）
2. 7-Zip（免費開源，支援 ZIP、RAR 等）

贊助QRcode
如果覺得這個工具不錯的話，歡迎贊助我學費吧QAQ

Image Not Showing Possible Reasons
  • The image was uploaded to a note which you don't have access to
  • The note which the image was originally uploaded to has been deleted
Learn More →

相關連結

Youtube DownloadErm Eng ver
Github 原始碼
Demo video
巴哈文章
Dcard
有什麼使用上的問題或BUG可以在Demo video下方留言區聯繫我：）

Image Not Showing Possible Reasons
  • The image was uploaded to a note which you don't have access to
  • The note which the image was originally uploaded to has been deleted
Learn More →

前言

為什麼要製作這工具，問就是受夠了網頁版的YT下載工具，廣告多、速度慢，還不能下載影片時長超過一小時的影片，所以這個工具就誕生了。

使用說明

  1. 輸入 YouTube 連結。
  2. 點擊「Search Resolution」按鈕。
  3. 選擇所需的解析度（Resolution）。
  4. 選擇 MP4 或 MP3 格式。
  5. 選擇檔案的儲存位置。
  6. 選擇下載方式。
  7. 點擊「Download Video」按鈕以開始下載。

ps. Playlist? 那格勾下去可以下載播放清單

下載方式說明

提醒一下：不管是什麼方式，其實都還是需要下載完整個影片喔(因為youtube影片無法分段下載)

  1. No Processing:
    直接下載完整影片，這是速度最快的選項。

  2. Quick Cut:
    先下載完整影片，再根據用戶選擇的時間段進行剪輯，該過程使用 ffmpeg 工具。最終生成的影片可能會比用戶選擇的時間段稍長一些。
    例：若設定「開始時間」為 "00:05:20"，結束時間為 "00:06:20"，最終生成的影片可能範圍為 "00:05:18" 至 "00:06:22"，總長度約為 1 分 4 秒。

  3. Detailed Cut:
    在進行 Quick Cut 後，影片將進行解碼與重新編碼，最終生成的影片將完全符合用戶選擇的時間段。

執行時間 (MP4): No Processing < Quick Cut < Detailed Cut
執行時間 (MP3): No Processing < Quick Cut = Detailed Cut

補充說明: 若選擇下載 MP3，Quick Cut 和 Detailed Cut 的執行速度與結果相同。

優點

  1. 無廣告：完全沒有內置廣告，使用體驗更加順暢。
  2. 高畫質：支持高畫質下載(8k)，並且畫質穩定。
  3. 無時限：支持長度大於一小時的影片下載，並且無下載次數限制。
  4. 無限速：下載速度完全取決於用戶自身的網速。
  5. 微剪輯：提供對於下載後的影片進行初步剪輯。

已知問題

  • 因為此應用程式沒有數位簽章(因為需使用金錢購買)，所以容易被防毒軟體認定為惡意程式，請將此資料夾加入至防毒軟體裡的白名單即可解決
    (Windows安全性->病毒與威脅防護設定->排除項目->點選新增或移除排除項目)

    Image Not Showing Possible Reasons
    • The image was uploaded to a note which you don't have access to
    • The note which the image was originally uploaded to has been deleted
    Learn More →

    有疑慮的可以考慮到Github拿原始碼自己打包

  • 極少數影片無法下載1080p以上畫質(下次更新會解決)

更新日誌

2024/10/2 ver1.02

  • 修復Search Resolution發生錯誤的問題
  • 現在勾選右方的"Playlist?"可以下載整個播放清單

2025/2/12 ver1.02.1

  • 修復整個程式無法正常下載影片的問題
  • 修復特定影片無法下載的問題

廢話區

2.0版本製作中，目前介面如下:

Image Not Showing Possible Reasons
  • The image was uploaded to a note which you don't have access to
  • The note which the image was originally uploaded to has been deleted
Learn More →

Image Not Showing Possible Reasons
  • The image was uploaded to a note which you don't have access to
  • The note which the image was originally uploaded to has been deleted
Learn More →

Image Not Showing Possible Reasons
  • The image was uploaded to a note which you don't have access to
  • The note which the image was originally uploaded to has been deleted
Learn More →

其他更新進度應該都會丟到X上，想看的自己去看ㄅ

Last changed by 
 
luouo
7
2
30258

Read more

Video DownloadErm ver2.0 Preview

Video DownloadErm ver2.0 Preview 此應用程式僅適用於 Windows 系統

Mar 24, 2025
Youtube DownloadErm ver1.02.1 [Eng ver]

Youtube DownloadErm ver1.02.1 [Eng ver]

Mar 8, 2025
Operating Systems Final Exam

一天內從0開始學習並產出期末考100張PPT的筆記，我TM快死了

Jun 5, 2024
電腦網路實習LAB2

--- title: 網路實習LAB2 –- ### 1. Setup IP addresses on all routers. 20% A-B 192.168.1.0, B-C: 192.168.2.0, C-D: 192.168.3.0 Go into router 0 and open CLI Router&gt;enable Router#conf t // enter &quot;configure terminal&quot; will work the same Router(config)#int fa0/0 Router(config-if)#ip addr 192.168.1.1 255.255.255.0 Router(config-if)#no sh exit router 0 Go into router 1 and open CLI Router&gt;ENABLE Router#conf t // congfigure terminal will work the same Router(config)#int fa0/0 Router(config-if)#ip addr 192.168.1.2 255.255.255.0 Router(config-if)#no sh Router(config-if)#do show ip route Router(config)#int fa0/1 Router(config-if)#ip addr 192.168.2.1 255.255.255.0 Router(config-if)#no sh exit router 1 Go into router 2 and open CLI Router&gt;ENABLE Router#conf t // congfigure terminal will work the same Router(config)#int fa0/0 Router(config-if)#ip addr 192.168.2.2 255.255.255.0 Router(config-if)#no sh Router(config-if)#do sh ip ro Router(config)#int fa0/1 Router(config-if)#ip addr 192.168.3.1 255.255.255.0 Router(config-if)#no sh exit router 2 Go into router 3 and open CLI Router&gt;ENABLE Router#conf t // congfigure terminal will work the same Router(config)#int fa0/0 Router(config-if)#ip addr 192.168.3.2 255.255.255.0 Router(config-if)#no sh Router(config-if)#do sh ip ro ### 2. Setup RIP(Routing information Protocol) at Router 1 &amp; 2. 40% go into router 1 Router(config)#router rip // make sure it is Router(config)# Router(config-router)#network 192.168.1.0 Router(config-router)#network 192.168.2.0 check for setup ip Router#sh ip ro // R 192.168.3.0/24 [120/1] via 192.168.2.2, 00:00:25, FastEthernet0/1 will appear go into router 2 Router(config)#router rip // make sure it is Router(config)# Router(config-router)#network 192.168.2.0 Router(config-router)#network 192.168.3.0 Router(config-router)#do show ip r check for setup ip Router#sh ip ro // R 192.168.1.0/24 [120/1] via 192.168.2.1, 00:00:03, FastEthernet0/0 will appear ### 3. Setup a static route at A to 192.168.3.0, and ping it at A. 20% go into router 0 Router(config)#ip route 192.168.2.0 255.255.255.0 192.168.1.2 // make sure its Router(config)# Router(config)#ip route 192.168.3.0 255.255.255.0 192.168.1.2 Router(config)#do ping 192.168.2.0 Router(config)#do ping 192.168.3.0 ### 4. Setup a default route at router D, ping 192.168.1.0 at D. 20% go into router 3 Router(config)#ip route 0.0.0.0 0.0.0.0 192.168.3.1 Router(config)#exit Router#ping 192.168.1.0

Apr 22, 2024
Read more from luouo
Published on HackMD