## 1.貼標流程(for專題生)

1. 開啟OneDrive中的1206資料夾，並下載影片
2. 下載label_exe(貼標程式)
3. 參考教育手冊p.12開啟貼標程式
4. label名稱為:ScrewUp,Brush,Sticker,Plug，麻煩統一
5. 各站Assemble可參考'標準工時測定表'以及下列'Assemble標籤說明'
6. 貼標結束後，將輸出的csv與原影片路徑輸入label_exe內的Aver_chak_data，即可產生貼標影片，影片再上傳至雲端output_video(1206)

## 2. Assemble標籤說明

每一站會重複出現多個Assemble，為了避免模型混淆，因此將 **'相同/重複'** 動作分開標記，以工作站的週期來區分，單站內重複應該沒什麼問題，若是不同站請確保**兩者相似性足夠高**，在加入新標籤之前，請先看過其他人標的或是自己先前標得有沒有類似。

以下為各站包含動作:

| 工作站(am) | 動作 | 工作站(pm) | 動作 |
|-------|-----|-------|------|
| 0912\_am\_1th | Assemble_1.1 | 0912\_pm\_1th | Assemble_1.1 |
| | Assemble_1.2 | | Assemble_1.2 |
| | Assemble_1.3 | | Assemble_1.3 |
| | Assemble_1.4 | | Assemble_1.4 |
| | Assemble_1.5 | | Assemble_1.5 |
| | Brush | | Brush |
| | Other | | Other |
| | Plugs | | Plugs |
| | ScrewUp | | ScrewUp |
| | Sticker | | Sticker |
| 0912\_am\_2th | Assemble_1.2 | 0912\_pm\_2th | Assemble_1.2 |
| | Assemble_2.2 | | Assemble_2.2 |
| | Assemble_2.3 | | Assemble_2.3 |
| | Assemble_2.4 | | Assemble_2.4 |
| | Brush | | Brush |
| | Other | | Other |
| | Plugs | | Plugs |
| | ScrewUp | | ScrewUp |
| | | | Sticker |
| 0912\_am\_3th | Assemble_3.1 | 0912\_pm\_3th | Assemble_3.1 |
| | Assemble_3.2 | | Assemble_3.2 |
| | Assemble_3.3 | | Assemble_3.3 |
| | Assemble_3.4 | | Assemble_3.4 |
| | Assemble_3.5 | | Assemble_3.5 |
| | Brush | | Brush |
| | Other | | Other |
| | ScrewUp | | ScrewUp |
| 0912\_am\_4th | Assemble_4.1 | 0912\_pm\_4th | Assemble_4.1 |
| | Assemble_4.2 | | Assemble_4.2 |
| | Brush | | Assemble_4.3 |
| | Other | | Brush |
| | Plugs | | Other |
| | ScrewUp | | Plugs |
| | Sticker | | ScrewUp |
| 0912\_am\_5th | Assemble_4.1 | 0912\_pm\_5th | Assemble_5.1 |
| | Assemble_5.1 | | Assemble_5.4 |
| | Assemble_5.2 | | Other |
| | Other | | Plugs |
| | Plugs | | ScrewUp |
| | ScrewUp | | Sticker |
| | Sticker | | |
| | Sticker_mark | | |
| 0912\_am\_6th | Assemble_6.1 | 0912\_pm\_6th | Assemble_6.3 |
| | Assemble_6.2 | | Assemble_6.4 |
| | Other | | Assemble_6.5 |
| | Plugs | | Other |
| | ScrewUp | | ScrewUp |
| | Sticker | | Sticker |
| | Sticker_pad | | |

#### 第一站
* Assemble_1.1 組排線

* Assemble_1.2 將扣環裝上支架

* Assemble_1.3 用鑷子取小鐵環裝上支架

* Assemble_1.4 將馬達裝上支架

* Assemble_1.5 將支架及馬達放上治具

* Assemble_1.6 將導光柱裝上鏡頭環

* Assemble_1.7 將排線裝上鏡頭環

#### 第二站
* Assemble_2.1 將軸承件裝上支架

* Assemble_2.2 將鏡頭及鏡頭環組合

* Assemble_2.3 組裝鏡頭側蓋

* Assemble_2.4 將鏡頭裝於支架

* Assemble_2.5 將軸承件裝於支架

* Assemble_2.6 組裝軸承鎖固件

#### 第三站
* Assemble_3.1 將支架側蓋裝於支架上


* Assemble_3.2 裝上支架外蓋


* Assemble_3.3 將鐵片及馬達放上治具


* Assemble_3.4 取小齒輪放上鐵片


* Assemble_3.5 用鑷子取c型環裝於小齒輪


#### 第四站
* Assemble_4.1 將排線裝於底座上蓋

* Assemble_4.2 將馬達模組裝於底座上蓋


* Aessemble_4.4 將彈片裝於馬達模組

* Assemble_4.3 插上 IR 片

#### 第五站

* Assemble_5.1 組裝 IO 背板與底座

* Assemble_5.2 將主板與底座組裝

* Assemble_5.4 將 cable 線與主板相接

* Assemble_5.3 插上線扣支架

* Assemble_5.5 貼上散熱墊

#### 第六站
* Assemble_6.1 插排線

* Assemble_6.2 將下蓋組裝於半成品

* Assemble_6.3 將機殼與貼紙貼覆下蓋

* Assemble_6.4 貼上導電鋁箔

* Assemble_6.5 Assemble 6.5