# Lab 9: Python Practice
## Learning Objectives
Our goal for lab this week is to get you comfortable with Python syntax, for loops, debugging, and Python's built-in function for sorting lists.
If you don't feel confident about any of these topics after your lab session, definitely come to TA Hours! We'd love to help you.
:::info
We've put a lot of problems into this lab since students will be working through Python at different paces. Don't worry if you don't finish them all.
:::
## Part 1: Debugging
### Debugging in VSCode
Consider the following function, `add_underscores(word: str) -> str`, which takes in a word and returns that same word, but with underscores added before and after each letter in the word (e.g. `"bee"` -> `"_b_e_e_"`):
```
def add_underscores(word):
"""adds underscores before & after each letter in word"""
new_word = "_"
for i in range(len(word)):
new_word = word[i] + "_"
return new_word
phrase = "hello"
print(add_underscores(phrase)) # should print out "_h_e_l_l_o_"
```
Copy and paste this snippet of code into a Python file, and run the program. You should see this output:
```
o_
```
Uh oh! We were expecting to get `_h_e_l_l_o_`, so this means our program has a bug! Let's use the VSCode Debugger to find it. Click on the arrow next to the play button on the top right of your window and click "Debug Python File":
After that, the debugger should open at the bottom of your screen.
The area where our bug must be occurring is at the line that says `new_word = word[i] + "_"`, since that's where we're supposed to be adding underscores but are currently failing to do so properly.
To investigate this line of code in particular, we're going to use a **breakpoint**, which will stop our code at a certain line so we can see values of variables and how they change at a given moment in time.
To add a breakpoint, click on the line number to the left of your code.
Now, click "Debug Python File" again. At your screen, you should see something like this:
Now we can see the values of `i`, `new_word`, and `word` at the moment in time when our program reaches that line where we set the breakpoint!
There are a few important buttons here:
- In the row of buttons at the top of the file:
- The green arrow button will rerun your program in the debugger.
- **The blue play button** will "unpause" your code -- if it hits the breakpoint again, it'll stop again, and otherwise it will stop after your program finishes execution.
- The red square button stops running your code in the debugger.
- The button that displays just a **blue arrow pointing down** ("Step Into") will allow you to move to the next line being executed by your program, whether or not that's a breakpoint.
Play around with the blue play button and the "Step Into" button. Watch the contents of the directory in the left panel. Can you find the bug? Once you find it, fix the bug in the code!
___
### *CHECKPOINT:* Call over a TA once you reach this point. Note that the TA can ask either partner to answer, so please make sure both partners understand the bug.
___
### Debugging with `print`
While VSCode's debugger can be useful, sometimes we want a quicker and lighter-weight option for debugging. Let's look at another program:
```
def mystery_fun(num_list: list) -> int:
return_value = 0
for num in num_list:
if num_list[num] % 2 == 0:
return_value += 1
if num_list[num] > 5:
return_value -= 1
if num_list[num] > 1:
return_value += num
return return_value
input = [2, 0, 7, 5, 1, 8, 4, 3, 5]
print(mystery_fun(input))
```
Copy and paste this piece of code into VSCode and run the program. What does it print?
The body of our function is a bit confusing -- let's try to figure out what it's doing. While the VSCode debugger could be used here, it is sometimes easier in practice to just let Python tell us the values of certain expressions as it's running, rather than have us track them manually by looking at the directory in the debugger.
:::spoiler
:::info
***Hint:*** If you're unfamiliar with some of the symbols in the body of the code do, try looking them up! For example, the `a % b` is the modulo operation, which returns the remainder after dividing `a` by `b`.
:::
To see what our function is actually doing, let's see how we can place `print` statements within our function to help us decipher what is changing and when.
Add this `print` statement within your for loop, above the if-statements:
```
print("Current num in loop: ", num_list[num])
```
Now run your program -- before it prints out the result of calling `mystery_fun(input)`, it should print a bunch of numbers that correspond to `num_list[num]` at each iteration of the loop.
Can you see more clearly how `return_value` changes throughout this function? Describe how `return_value` is modified as it progresses through each number in `input`.
***HINT:*** If you're not sure yet, try adding other `print` statements to make it more clear what's going on.
___
### *CHECKPOINT:*
**Call over a TA once you reach this point.**
**Compare and contrast debugging with print vs. with the debugger. Note that the TA can ask either partner to answer, so please make sure both partners understand what's going on.**
___
## Part 2: Maps and Filters in Python
Like Pyret, Python has `filter`, `map`, and `lam(bda)`. It also has different notations for working with strings. Since these are all very useful tools, this part of lab has you practice working with them.
Imagine that it's shopping period, and Katie has put many courses in her cart. We're going to write programs to help her organize and track them all.
```
course_list = ["CSCI0180", "CSCI0160", "CSCI0220", "CSCI0320",
"CSCI1420", "CSCI1951", "APMA0330", "APMA0350", "APMA1650",
"ENGL0220", "ENGL0510", "CLPS0150", "CLPS0450", "CLPS0900",
"CLPS1360"]
```
**Task 1:** First, let's figure out how to find all courses in a given department. Write a function `dept_courses(dept: str)` that takes in a 4-letter department code and produces a list of all courses in department `dept`. Then, write a function `course_num(num: str)` that takes in a 4-digit course number (as a string) and produces a list of all courses with that number (regardless of department).
*Note: to do this, you need to know how to select specific portions of strings. In Python (and other languages), this is called "string slicing". See the instructions below.*
---
:::spoiler **String Slicing** (click to expand)
:::info
**NOTE:** To do many of the following problems, you will need to do something called *string slicing*. String slicing is the Python equivalent of Pyret's `string-substring`, but winds up being a lot more powerful.<br>
Let's say you have the string `str = "Beep!"`. Just like in Pyret, strings in Python are **0-indexed:**
- The "B" is at **index 0**
- The "e"s are at **indices 1 and 2**
- The "p" is at **index 3**
- The "!" is at **index 4**
To access the characters at those indices, use the notation: `str[index]`. For example,
```
>>> str[0]
"B"
>>>str[4]
"!"
```
If you want to slice a string into a substring of *more than one character*, use the notation: `str[start:end]` where `start` represents the first index of the substring (inclusive) and `end` represents the last index of the substring (exclusive). For example,
```
>>> str[0:5]
"Beep!"
>>> str[1:4]
"eep"
>>> str[2:3] # note that this is equivalent to str[2]
"e"
>>> str[2:2] # no characters in range, so this outputs the empty string
""
```
That's all you need to know for the lab, but Python has a few additional shortcuts for string slicing that might be useful in the long run:
- If you **leave off the start or end index**, Python assumes you want to start at 0 and end at the end of the string:
```
>>> str[:3] # equivalent to str[0:3]
"Bee"
>>> str[3:] # equivalent to str[3:5]
"p!"
>>> str[:] # equivalent to str[0:5]
"Beep!"
```
- **Negative numbers** let you index from the end of a string
```
>>> str[-1] # equivalent to str[4]
"!"
>>> str[-5] # equivalent to str[0]
"B"
>>> str[-3:-1] # equivalent to str[2:4]
"ep"
```
:::
---
**Task 2:** Write a function `course_search(dept: str, min: int, max: int)` that takes in a 4-letter department code, a minimum course code, and a maximum course code, and produces a list of all courses in department `dept` with numbers between `min` and `max`, inclusive.
==**HINT:**== Notice how the course list is a list of strings, making each course code to be a string. To compare between two integers, you can cast an int over each string like so: **int(course_code)**.
**Task 3:** Write a function `pretty_print(dept: str)` that takes in a 4-letter department code and prints out the full name of a department followed by all of its courses. Each course should be on a separate line with "-" before the course name.
For example:
```
>>> pretty_print("CSCI")
Computer Science
- CSCI0180
- CSCI0160
- CSCI1420
- CSCI1951
```
**Task 4:** Write a function `compare_depts(dept1: str, dept2: str)` that takes in the 4-letter department codes of two departments and returns the 4-letter department code of the department that is offering more courses. If both departments are offering the same number of courses, the function should return "equal" (`str`). If a department isn't offering any courses, raise an exception.
___
### *CHECKPOINT:* Call over a TA once you reach this point. If one partner programmed the last few functions, the other partner should program for the next task.
___
## Problems Beyond Courses
**Task 5:** Write a function `obscure` that takes a string and replaces certain letters with numbers (a common, but ineffective, password protection technique). Specifically, convert every e (or E) to 3, every i (or I) to 1, and every o (or O) to zero. Write a helper function that takes in a single character and converts it if necessary (and keeps it the same if not).
*NOTE: You can use == to compare strings, or check whether a character is in a list (such as ["a", "A"]) of characters to be treated similarly. To check whether an item is in a list, use an `in` expression of the form `item in list`.*
**Task 6:** Write a function `sorted_increasing` that determines whether a list of numbers is sorted into strictly increasing order.
*NOTE: The Boolean type is written as `bool` in Python; `True` and `False` (with first letter capital) are the two boolean values.*
*HINT: The challenge here is to figure out how to track the previous number in the list. Think about how a variable could help you do that.*
**Task 7:** Write a function `first_five_pos` that takes a list and returns a list of the first five positive numbers from the input list. If there are less than five positive numbers, still return them.
___
### *CHECKPOINT:* Call over a TA once you reach this point. If one partner programmed the last few functions, the other partner should program for the next task.
___
## Part 3: Sorting Lists in Python
:::spoiler **Basic Sorting** (click to expand)
Python has a useful and customizable sorting function that operates on lists. In this section, we will explore how to use it.
The simplest version of the function is `sorted(lst: list)`, which takes in a list and sorts it in ascending order.
- Lists of integers are sorted numerically
- Lists of strings are sorted alphabetically
- Lists of booleans are sorted with all `False`s before all `True`s
For example:
```
>>> sorted([1,5,3,1])
[1,1,3,5]
>>> sorted(["bc", "abc", "d", "aa", "aaa"])
['aa', 'aaa', 'abc', 'bc', 'd']
>>> sorted([False, True, True, False, True])
[False, False, True, True, True]
```
To sort a list in descending order, add the input `reverse=True` to the function call. Here are the examples from above but sorted in reverse:
```
>>> sorted([1,5,3,1], reverse=True)
[5,3,1,1]
>>> sorted(["bc", "abc", "d", "aa", "aaa"], reverse=True)
['d', 'bc', 'abc', 'aaa', 'aa']
>>> sorted([False, True, True, False, True], reverse=True)
[True, True, True, False, False]
```
*NOTE: Notation like `reverse=True` is used for optional inputs to a function, a concept we did not see in Pyret. Since an optional input might not be provided, we need the `<name>=` part to indicate which optional parameter is being used.*
---
:::spoiler **Custom Sorting** (click to expand)
In most cases, default sorting is enough. However, what if you want to sort a list in a specific, custom way? To do so, add the input `key=my_fun` where `my_fun` represents a function that takes in a single list element. `my_fun` is called on each element in the list, and **its output** determines the sort order.
Let's take a look at a concrete example. The following function takes in a string and returns its length:
```
def key_fun(elem: str):
return len(elem)
```
With `key_fun` defined, we can do the following to sort the list by string length:
```
>>> sorted(["Buddy Valastro", "does", "love", "sorting", "lists"], key=key_fun)
['does', 'love', 'lists', 'sorting', 'Buddy Valastro']
```
*(Note that since string length is an integer, `sorted` defaults to sorting the elements in increasing order)*
:::
---
Let's apply the ideas of sorting discussed above to the course list examples from earlier:
**Task 8:** Sort `course_list` in alphabetical order by department code.
**Task 9:** Sort `course_list` by course number, regardless of department code.
___
### *CHECKPOINT:* Call over a TA once you reach this point. If one partner programmed for this task, the other partner should program for the next task.
___
Let's explore sorting on keys other than numbers. Imagine that we are playing a board game in which the words you come up with earn points (like Scrabble, if you know it). You want to pick the highest-scoring word out of a list of options. In this section, we'll do this with several different scoring functions to practice Python skills.
:::info
Another way to think about what's happening is to imagine mapping the `key` function on the list, sorting, and then undoing the mapping. In other words:
**Step 1 (the original list):** ["bees", "are", "my", "favorite"]
**Step 2 (the mapped list):** [4, 3, 2, 8]
**Step 3 (the sorted order):** [2, 3, 4, 8]
**Step 4 (the "un-mapped" list):** ["my", "are", "bees", "favorite"]
:::
*NOTE: Note that if multiple elements mapped to the same thing -- in this case, multiple words had the same number of letters -- they would stay in their original order (this is called stable sorting).*
Let's try more complicated scoring
* Vowels (including y): **1 point per vowel**
* Consonants: **2 points per consonant**
* Unless the consonant is z/q/x, in which case it is worth **5 points**
*Reminder:* if you need to convert a string into a list of characters, you can do that by writing `list("my string")` (for whatever string you have in mind).
**Task 10:** Write a function `sort_by_score(lst : list)` that takes in a list of strings and sorts them by their score (in descending order, i.e. highest to lowest) using the updated scoring system. Assume all strings in the list are only made up of alphabetical characters (no numerical, punctuation, spaces, etc.).
For example, "bee" has a score of 2+1+1=4 and
`sort_by_score(["aaa", "aba", "bee", "BEE", "Z"])`
should return `["Z", "aba", "bee", "BEE", "aaa"]`.
___
### *CHECKPOINT:* Call over a TA once you reach this point.
___
> Brown University CSCI 0111 (Fall 2024)
> Feedback form: tell us about your lab experience today [here](https://forms.gle/52Fi9HdMFRgW1vD67)!
Sign in with Wallet
Connect another wallet