---
# System prepended metadata

title: 貼標備註&流程

---


## 1.貼標流程(for專題生)

1. 開啟OneDrive中的1206資料夾，並下載影片
2. 下載label_exe(貼標程式)
3. 參考教育手冊p.12開啟貼標程式
4. label名稱為:ScrewUp,Brush,Sticker,Plug，麻煩統一
5. 各站Assemble可參考'標準工時測定表'以及下列'Assemble標籤說明'
6. 貼標結束後，將輸出的csv與原影片路徑輸入label_exe內的Aver_chak_data，即可產生貼標影片，影片再上傳至雲端output_video(1206)


## 2. Assemble標籤說明

每一站會重複出現多個Assemble，為了避免模型混淆，因此將 **'相同/重複'** 動作分開標記，以工作站的週期來區分，單站內重複應該沒什麼問題，若是不同站請確保**兩者相似性足夠高**，在加入新標籤之前，請先看過其他人標的或是自己先前標得有沒有類似。

以下為各站包含動作:

| 工作站(am) | 動作 | 工作站(pm) | 動作 |
|-------|-----|-------|------|
| 0912\_am\_1th | Assemble_1.1 | 0912\_pm\_1th | Assemble_1.1 |
|  | Assemble_1.2 |  | Assemble_1.2 |
|  | Assemble_1.3 |  | Assemble_1.3 |
|  | Assemble_1.4 |  | Assemble_1.4 |
|  | Assemble_1.5 |  | Assemble_1.5 |
|  | Brush |  | Brush |
|  | Other |  | Other |
|  | Plugs |  | Plugs |
|  | ScrewUp |  | ScrewUp |
|  | Sticker |  | Sticker |
| 0912\_am\_2th | Assemble_1.2 | 0912\_pm\_2th | Assemble_1.2 |
|  | Assemble_2.2 |  | Assemble_2.2 |
|  | Assemble_2.3 |  | Assemble_2.3 |
|  | Assemble_2.4 |  | Assemble_2.4 |
|  | Brush |  | Brush |
|  | Other |  | Other |
|  | Plugs |  | Plugs |
|  | ScrewUp |  | ScrewUp |
|  |  |  | Sticker |
| 0912\_am\_3th | Assemble_3.1 | 0912\_pm\_3th | Assemble_3.1 |
|  | Assemble_3.2 |  | Assemble_3.2 |
|  | Assemble_3.3 |  | Assemble_3.3 |
|  | Assemble_3.4 |  | Assemble_3.4 |
|  | Assemble_3.5 |  | Assemble_3.5 |
|  | Brush |  | Brush |
|  | Other |  | Other |
|  | ScrewUp |  | ScrewUp |
| 0912\_am\_4th | Assemble_4.1 | 0912\_pm\_4th | Assemble_4.1 |
|  | Assemble_4.2 |  | Assemble_4.2 |
|  | Brush |  | Assemble_4.3 |
|  | Other |  | Brush |
|  | Plugs |  | Other |
|  | ScrewUp |  | Plugs |
|  | Sticker |  | ScrewUp |
| 0912\_am\_5th | Assemble_4.1 | 0912\_pm\_5th | Assemble_5.1 |
|  | Assemble_5.1 |  | Assemble_5.4 |
|  | Assemble_5.2 |  | Other |
|  | Other |  | Plugs |
|  | Plugs |  | ScrewUp |
|  | ScrewUp |  | Sticker |
|  | Sticker |  |  |
|  | Sticker_mark |  |  |
| 0912\_am\_6th | Assemble_6.1 | 0912\_pm\_6th | Assemble_6.3 |
|  | Assemble_6.2 |  | Assemble_6.4 |
|  | Other |  | Assemble_6.5 |
|  | Plugs |  | Other |
|  | ScrewUp |  | ScrewUp |
|  | Sticker |  | Sticker |
|  | Sticker_pad |  |  |



#### 第一站
  * Assemble_1.1 組排線
  ![image.png](https://hackmd.io/_uploads/HyVfOH9Q6.png)
  
  * Assemble_1.2 將扣環裝上支架
  ![image.png](https://hackmd.io/_uploads/HJaKTS5m6.png)

  * Assemble_1.3 用鑷子取小鐵環裝上支架
  ![image.png](https://hackmd.io/_uploads/BkTt_rqQ6.png)

  * Assemble_1.4 將馬達裝上支架
  ![image.png](https://hackmd.io/_uploads/H1I11UqQT.png)

  * Assemble_1.5 將支架及馬達放上治具
  ![image.png](https://hackmd.io/_uploads/BJxS7Ic7a.png)
  
  * Assemble_1.6 將導光柱裝上鏡頭環
  ![image.png](https://hackmd.io/_uploads/H1J1Sw9mT.png)
  
  * Assemble_1.7 將排線裝上鏡頭環
  ![image.png](https://hackmd.io/_uploads/H1G-Lv9XT.png)

  
 
#### 第二站
  * Assemble_2.1 將軸承件裝上支架
  ![image.png](https://hackmd.io/_uploads/SJhQ7q576.png)
  
  * Assemble_2.2 將鏡頭及鏡頭環組合
  ![image.png](https://hackmd.io/_uploads/ryVE6FqXp.png)
  
  * Assemble_2.3 組裝鏡頭側蓋
  ![image.png](https://hackmd.io/_uploads/ByOgCtcX6.png)
  
  * Assemble_2.4 將鏡頭裝於支架
  ![image.png](https://hackmd.io/_uploads/SJZKAK57T.png)
  
  * Assemble_2.5 將軸承件裝於支架
  ![image.png](https://hackmd.io/_uploads/rydz19cQ6.png)
  
  * Assemble_2.6 組裝軸承鎖固件
  ![image.png](https://hackmd.io/_uploads/Sk6Tkqc7T.png)
  

  
#### 第三站
  * Assemble_3.1 將支架側蓋裝於支架上

  ![assemble_3.1](https://hackmd.io/_uploads/SJpOyAimp.jpg)
  
  * Assemble_3.2 裝上支架外蓋

  ![assemble_3.2](https://hackmd.io/_uploads/SJRjJAoXa.jpg)
  
  * Assemble_3.3 將鐵片及馬達放上治具

  ![3.3](https://hackmd.io/_uploads/BkRaf82rp.jpg)

  * Assemble_3.4 取小齒輪放上鐵片

  ![3.4](https://hackmd.io/_uploads/B1SRM8hHa.jpg)
  
  * Assemble_3.5 用鑷子取c型環裝於小齒輪

  ![assemble_3.5](https://hackmd.io/_uploads/SJedbgCo76.jpg)
  
  
#### 第四站
* Assemble_4.1 將排線裝於底座上蓋
    ![assemble_4.1](https://hackmd.io/_uploads/S1EFgRjXp.jpg)
            
* Assemble_4.2 將馬達模組裝於底座上蓋

    ![assemble_4.4](https://hackmd.io/_uploads/rycyG0im6.jpg)
    
* Aessemble_4.4 將彈片裝於馬達模組
    ![assemble_4.6](https://hackmd.io/_uploads/rkzhpu0Qp.jpg)

* Assemble_4.3 插上 IR 片
  ![assemble_4.5](https://hackmd.io/_uploads/BkjxzRima.jpg)
  
#### 第五站

* Assemble_5.1 組裝 IO 背板與底座
  ![assemble_5.1](https://hackmd.io/_uploads/B1RGz0iQT.jpg)
  
* Assemble_5.2 將主板與底座組裝
  ![assemble_5.2](https://hackmd.io/_uploads/HyXNGRimT.jpg)
  
* Assemble_5.4 將 cable 線與主板相接
  ![assemble_5.4](https://hackmd.io/_uploads/r1fuzRsXT.jpg)
  
* Assemble_5.3 插上線扣支架
  ![assemble_5.3](https://hackmd.io/_uploads/S1GUG0sQa.jpg)
  
* Assemble_5.5 貼上散熱墊
  ![assemble_5.5](https://hackmd.io/_uploads/HkTtfCim6.jpg)
  
  
#### 第六站
  * Assemble_6.1 插排線
  ![image](https://hackmd.io/_uploads/Skgixs1Ea.png)
  
  * Assemble_6.2 將下蓋組裝於半成品
  ![image](https://hackmd.io/_uploads/S1WiWs1VT.png)

  * Assemble_6.3 將機殼與貼紙貼覆下蓋
  ![image](https://hackmd.io/_uploads/SJIyTnJEa.png)
  
  * Assemble_6.4 貼上導電鋁箔
  ![image](https://hackmd.io/_uploads/BkffA31V6.png)
  
  * Assemble_6.5 Assemble 6.5
  ![image](https://hackmd.io/_uploads/r1Rt03y4a.png)
  

