---
# System prepended metadata

title: AP.Setup Login | 192.168.1.1

---

# AP.Setup Login | 192.168.1.1

To set up your range extender using Ap.setup at 192.168.10.1, ensure that you have connected the extender either through Wi-Fi or an Ethernet cable. Then, type [http://ap.setup](https://www.wirelessextendersetup.org/ap-setup/)/ in the address bar of your web browser. If this URL does not work, you can alternatively enter the default IP address of 192.168.10.1 in the address bar.

![](https://i.imgur.com/rPan118.png)


**How to Setup using Ap.Setup?**

Several routers provide the option to configure the Extender as either a Wireless Access Point (AP) or Wireless Extender to increase wireless coverage. In this configuration, the Extender functions solely as a wireless device to produce a wireless network. It's important to note that when the Extender operates as an Access Point, it will no longer perform router functions such as DHCP server and port forwarding. All of the Extenders mentioned above can be configured using ap. setup. To set up an Extender using the ap.setup, follow these steps:

 

1. First, plug in the Extender to a power outlet and wait for the light to turn solid green.
1. Press the WPS button on the router, and within two minutes, press the WPS button on the Extender as well.
1. Once the light on the Extender turns solid green, it indicates the Extender is connected.
1. Another way to configure your Extender is to plug it into the router using an Ethernet cable and then use your computer to access the offline page [http://ap.setup/](https://www.wirelessextendersetup.org/ap-setup/) to set up the Extender.
1. Finally, once the setup page opens, follow the on-screen instructions to complete the setup process.


**How To Setup Ap.Setup via WPS?**

An alternative method to set up the Wavlink Extender is to use WPS, provided that your router supports this feature. Follow these steps to set up the Wavlink Extender using WPS:

1. Place both the Extender and the router in the same room.
1. Locate the WPS button on the Wavlink Range Extender (Repeater) and press and hold it for 2-3 seconds until the light starts blinking.
1. Press the WPS button on your router.
1. The WPS lights on both the Extender and the router will blink for 10-15 seconds, indicating that a connection is being established.
1. Once the connection is successfully made between both devices, the WPS light on the router will stop blinking, while the WPS light on the repeater will become stable.


If you are facing any issues regarding the setup process then no need to worry. [Ap.setup](https://www.wirelessextendersetup.org/ap-setup/) support is also available to assist users who experience difficulties during the setup process, providing technical expertise and troubleshooting services to help users resolve any issues they encounter.