# WG-AP-ST Weekly telco 11/Oct/2022

Date : 9:00-10:30(CET) 11/Oct/2022
Speaker: Akiyoshi Yamada(Toyota)
Minutes Taker: Akbar(LGE)

###### tags: `weekly-telco2022` `WG-AP-ST`

## Participants

Participants would be check on your name

* [ ] Akbar Mirkar(LGE)
* [ ] Ryosuke Takahashi(Nagoya Univ.)
* [ ] Masahiro Kawanishi(GAIO)
* [ ] Hiroki Takeuchi(GAIO)
* [ ] Kenji Ohnisi(GAIO)
* [ ] Harshal Dalal(Nissan)
* [ ] Seungyueb Chae(PopcornSAR)
* [ ] Yuushi Gogami(SCSK)
* [ ] Kento Yamazaki(SCSK)
* [ ] Miho Asai(SCSK)
* [ ] Aaswad Kulkarni(TCS)
* [ ] Akiyoshi Yamada(TME)
* [ ] Kohsuke Nakamura(Honda)
* [ ] Asha Prashant Patil(BOSCH)
* [ ] Andreas Tennert(TraceTronic)
* [ ] Assem Mostafa(Valeo)
* [ ] Prathamesh Hatle(capgenimi)

## Specification: CM: Scenario3 update
https://jira.autosar.org/browse/AR-111719

### IP address
ECU1: 192.168.100.5      →  192.168.7.12
ECU2: 192.168.100.2      →  192.168.7.14
Jenkins: 192.168.100.10 →  192.168.7.10

#### Scope
4.1.1
4.1.2

#### CM: STS_CM_00003 Step15
[CMApp05] [ECU2]
gets the current status of subscription,
i.e. [CMApp05] [ECU2] has stopped
subscription from service
[CMService{*}05{*}].
->

[CMApp05] [ECU2]
gets the current status of subscription,
i.e. [CMApp05] [ECU2] has stopped
subscription from service
[CMService{*}08{*}].

#### DDS: [STS_DDS_00004] Step8
[DDSApp{*}03{*}] receive the data asynchronously by calling
the Method_C over the service [DDSService05].

->

[DDSApp{*}02{*}] receive the data asynchronously by calling
the Method_C over the service [DDSService05].

### Machine State
*Machine State "Parking" (Pre-conditions){*}
Machine State "Parking".　→　"Off" 

Machine State "Driving"

### Function Group
Driving　→　STS_[***]_0000{*}

### Test Step Scenario2 → Scenario 3 (CM Specification)
https://jira.autosar.org/browse/TFAPD-4924

- TestCase2
https://jira.autosar.org/browse/TFAPD-5164
- TestCase3
https://jira.autosar.org/browse/TFAPD-5165

## Specification: EMO: Scenario3 update
https://jira.autosar.org/browse/AR-113412

TestScenario 1 - 4
STC_EMO_00001
STC_EMO_00002

### Application Manifest
Application Manifest → Execution Manifest
ECU2 → ECU1 192.168.7.12

### IP address
ECU1: 192.168.100.5      →  192.168.7.12
ECU2: 192.168.100.2      →  192.168.7.14
Jenkins: 192.168.100.10 →  192.168.7.10

### Machine state/Function group names
Machine state shall remain unchanged, however in all the testcases of Execution Management instead of using machine states, function group states shall be used
Change function group names and state names as follows
FG1 → SystemTestFunctionGroup1
FG2 → SystemTestFunctionGroup2
Function group states shall be different for each configuration like
For STC_EMO_0000X :
FunctionGroupName: SystemTestFunctionGroup1
Function Group States: off, STC_EMO_0000X_Diag, STC_EMO_0000X_Fallback,
STC_EMO_0000X_Running
FunctionGroupName: SystemTestFunctionGroup2
Function Group States: off, STC_EMO_0000X_On, STC_EMO_0000X_Activate

### Application name
Application name shall remain unchanged, Application Id needs to be changed
For Example: For Test configuration STC_EMO_0000X
APPID1 → EMX1, APPID2 → EMX2, APPID3 → EMX3, APPID4 → EMX4, APPID5 →

EM12 - EM15, EM21 - EM26

Machene -> System FG state
STC_EMO_0000X_Shutdown

## E2E
https://svn.autosar.org/repos/work/09_WorkingGroups/WG-AP-ST/40_InternalDocuments/TestSpecificationDraft/branch/TR_AdaptivePlatformSystemTests_890/chapters/11_TestConfigurationE2E

## Specification: System Test Scenario3 update
https://jira.autosar.org/browse/AR-113414

### IP address
ECU1: 192.168.100.5      →  192.168.7.12
ECU2: 192.168.100.2      →  192.168.7.14
Jenkins: 192.168.100.10 →  192.168.7.10

#### Scope
4.1.1
4.1.2
5.1.1.1
5.1.1.2
xxx

### Machine State
{}Machine State "Parking" (Pre-conditions)
Machine State "Parking".　→　"Off" 

Machine State "Driving"
Driving　→　STS_[***]_0000{*}

### CM Test
Test Step Scenario2 → Scenario 3 (CM Specification)
https://jira.autosar.org/browse/TFAPD-4924

### CM: STS_CM_00003 Step15
[CMApp05] [ECU2]
gets the current status of subscription,
i.e. [CMApp05] [ECU2] has stopped
subscription from service
[CMService\{*}05\{*}].
->

[CMApp05] [ECU2]
gets the current status of subscription,
i.e. [CMApp05] [ECU2] has stopped
subscription from service
[CMService\{*}08\{*}].

DDS: [STS_DDS_00004] Step8
[DDSApp\{*}03\{*}] receive the data asynchronously by calling
the Method_C over the service [DDSService05].

->

[DDSApp\{*}02\{*}] receive the data asynchronously by calling
the Method_C over the service [DDSService05].

{+}Application Manifest
{+}Application Manifest ->  Execution Manifest