---
# System prepended metadata

title: IntelliSwaut Installation

---

# IntelliSwaut Installation

The below  diagram illustrates the architecture of intelliswaut. 

![](https://i.imgur.com/MLLnanP.png)


The *intelliSWAUT* Agent installer is a `.zip` file. Listed are the steps to install intelliSwaut agent on windows machine. 

1.	Download the `.zip` file and copy it to the windows machine. 
2.	Extract the `.zip` file to `C:\Program Files (x86)\`
3.	Once extracted, navigate to the folder “`C:\Program Files (x86)\IntelliSWAUT Agent`” and edit the “`properties.conf`”. 
4.	Change the value for the below property with the IP address where IntelliSWAUT server is running. Keep rest of the properties unchanged.

    `AppServerIPHost=xxx.xx.xx.xx`

4.	Navigate to “`C:\Program Files (x86)\IntelliSWAUT Agent\shortcuts`” and copy  “`IntelliSWAUT Agent`” folder and paste it under “`C:\Users\{username}\AppData\Roaming\Microsoft\Windows\Start Menu\Programs”`. This will add shortcuts to the Windows 10 start menu. Once the shortcut is created, it can be used  to start and stop the IntelliSWAUT server.

    ![](https://i.imgur.com/c72B3ql.png)

 
5.	The Agent does not have a UI. To check if Agent is running. Go to “`C:\Program Files (x86)\IntelliSWAUT Agent\agent`” folder and check for the following files: 

    •	agent.pid
    •	agent.vnc.pid
    •	agent.vncproxy.pid

    If these files are present, the agent is running.         These files will be deleted if agent is not running /     stopped.

    

6. The following ports are used by IntelliSWAUT Agent to communicate with IntelliSWAUT Server. These properties are defined in “`properties.conf`” under “`C:\Program Files (x86)\IntelliSWAUT Agent`” folder

* AgentPort=`5009`
* AgentVNCPort=`3006`
* AppServerPort=`3000`
