# Softbank Airターミナル3 起動ログ

onchip
NF id boot!
Nand save 0x8A000121
UnSec_boot!mddrc init ok
13
src_addr :0x00080000
dst_addr :0x4FD00000
img_size :0x00031F50
4
sec disable
56
  Start mic now ...
/proc/power_on open failed
start_mode = 0
ifconfig: SIOCGIFFLAGS: No such device
ATP_FOM_RET_OTHER_ERR err1
ATP_FOM_RET_OTHER_ERR err1
GlobeMac Init OK
NV_Read: Para is Error

 mac num={1,4,0,0,0,4}

 ATP_MIC_UpgValueChange ulDbInit=0
Load db now ...
now lAccessSemID [0] will be set to -1

 ATP_MIC_UpgValueChange ulDbInit=1
already config sync cFlags:2

 mic web [/usr1/code/P750s_ShareCode/code/current/P750s/vendor/hisi/modem/atpv2/vendor/atp/package/atp/libraries/private/ssp/mic/main/src/webmicadapt.c] [MicCheckPortInUse] [211] MicCheckPortInUse sscanf_s failed!


 mic web [/usr1/code/P750s_ShareCode/code/current/P750s/vendor/hisi/modem/atpv2/vendor/atp/package/atp/libraries/private/ssp/mic/main/src/webmicadapt.c] [MicWebSocketInit] [249] MicWebSocketInit type is 0...

 mic web [/usr1/code/P750s_ShareCode/code/current/P750s/vendor/hisi/modem/atpv2/vendor/atp/package/atp/libraries/private/ssp/mic/main/src/webmicadapt.c] [MicWebStartCreateSockTimer] [285] Start MicWebStartCreatSockTimer now ...

****ledservice wifi init.*****
******ledservice wps init.******n>>>>>>button_Create over<<<<<<<<<<
>>>>>>button_Create over<<<<<<<<<<
>>>>>>button_Create over<<<<<<<<<<
>>>>>>button_Create over<<<<<<<<<<
Info, init t_exit_cond. pid: 189
Init_sys_netlink completely!
mic enter message loop now.
Info, init t_exit_cond. pid: 236
Info, init t_exit_cond. pid: 238
Info, init t_exit_cond. pid: 243
Info, init t_exit_cond. pid: 235
Info, init t_exit_cond. pid: 239
get_antenna_enable 0
##sendmsg return 16, errno 2.
AT_Cnum excute fail!
Info, init t_exit_cond. pid: 240
Mode Switch:Mode=1
Mode Switch:Mode1_check_flag=0
************************Write db to flash now ...
enable iptv failed: Operation not supported on transport endpoint
========> macalgrithm_4RSVD failed, ulMacType = 80000335 ulConutIndex = 0 *ulMacTypes[4].pulMacnum = 0, ulLength = 32
ready to load Wi-Fi ko...........
Wi-Fi driver used nvram file is B610s-79a.nvm
EthGetCfgNum return 2
enable vport process status is 0
done sync
************************Write db to flash now ...
nvram file :/var/nvram/bcm43217_nvm.txt
done sync
enable iptv failed: Operation not supported on transport endpoint
ifconfig: SIOCGIFFLAGS: No such device
smuxctl: socket or ioctl error for rem: Invalid argument
Wanumtscms: func[    WUTR098IniDevice] line[536]Initial UMTS device
-l sh start /var/firewall_init.sh

===========set tcpnodelay failed

===========set tcpnodelay failed

===========set tcpnodelay failed

===========set tcpnodelay failed
wl0.1: No such device
wl1.1: No such device
ifconfig wl1 up

  open led file err
2
3
Sorry, rule does not exist.
Sorry, rule does not exist.
wl0.1: No such device
Wanumtscms: func[WUIniPrivateMobileDevice] line[ 99]E5 device initial
ChannelWanGuide...0..

deal with rules over...

wl1.1: No such device
Read ppp session flash area error.
  open led file errcms init ok.
set_sys_autosleep write data failed.
Wanumtscms: func[   WUAtserverMsgProc] line[138]Nofift dialup to start detecting signal
Wanumtscms: func[     WUDialupMsgProc] line[490]Wireless device service down srv=[1]

ip6tables: Bad rule (does a matching rule exist in that chain?).
Sorry, rule does not exist.
Sorry, rule does not exist.
Sorry, rule does not exist.
Sorry, rule does not exist.
AT_Cnum excute fail!
AT_Cnum excute fail!
Unable to chmod /var/atp_boot_track.log: No such file or directory
--------------------------------------------------------------------
---------------------------Welcome To Cli---------------------------
--SBA3p, B610s-79aTCPU-V100R001B193D09SP00C643, 98:9C:57:96:CC:1E--
--------------------------------------------------------------------

Login: Start mic now ...
/proc/power_on open failed
start_mode = 0
-l sh end /var/firewall_init.sh
iptables: Bad rule (does a matching rule exist in that chain?).
iptables: Bad rule (does a matching rule exist in that chain?).
ip6tables: Bad rule (does a matching rule exist in that chain?).
ip6tables: Bad rule (does a matching rule exist in that chain?).
wl0.1: No such device
wl1.1: No such device
************************Write db to flash now ...
done sync
WPS: set msglevel to 0x0
Failed to open /var/devgpio

### wps_wfi_init(): <wl0_wfi_enable=0><wl1_wfi_enable=0><wl1.1_wfi_enable=(null)><wl0.1_wfi_enable=(null)>WFI is not enabled ###
>>>upnp Disalbed......
************************Write db to flash now ...
done sync
ifconfig wl0 up

  open led file err
  open led file err
 mic web [/usr1/code/P750s_ShareCode/code/current/P750s/vendor/hisi/modem/atpv2/vendor/atp/package/atp/libraries/private/ssp/mic/main/src/webmicadapt.c] [MicWebCreateSockTimer] [275] MicWebCreateSockTimer now ...


 mic web [/usr1/code/P750s_ShareCode/code/current/P750s/vendor/hisi/modem/atpv2/vendor/atp/package/atp/libraries/private/ssp/mic/main/src/webmicadapt.c] [MicCheckPortInUse] [211] MicCheckPortInUse sscanf_s failed!


 mic web [/usr1/code/P750s_ShareCode/code/current/P750s/vendor/hisi/modem/atpv2/vendor/atp/package/atp/libraries/private/ssp/mic/main/src/webmicadapt.c] [MicWebSocketInit] [245] no need create web socket as already create!
Inetd app multiupg:240 exited: signal number [9], exit code [0].
notify server: send_wakeup_msg, the client has closed! mid=[81], socket=[35]