--- tags: mPOS --- <!-- <style> hr{ page-break-after: always } </style> --> # MPOS安裝 [toc] ## 總部安裝 :::danger - 新增的門市IP需重新寫進CA([參考](#3-更新SSL憑證)) - CA更新後須重啟tomcat ::: ### RPI #### **Prerequisite** - Peripherals - 有HDMI 螢幕 - USB鍵盤/滑鼠 > :::info > 先接上周邊再開機 > ::: - 連接內網 - Wifi設定 - 修改 `/etc/wpa_supplicant/wpa_supplicant.conf` (需 root 權限) ``` ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev update_config=1 country=TW # SET wifi conn network={ ssid="..." key_mgmt="..." wep_key0="..." #如使用AP-PDA注意密碼前後沒有雙引號" #disabled=1 } ``` - 執行 `sudo wpa_cli -i wlan0 reconfigure` - 執行 `ip addr` 確認連上 #### 1. 確認系統更新 ([若無需更新跳至 2.](#2-%E7%A2%BA%E8%AA%8D%E7%A8%8B%E5%BC%8F%E6%9B%B4%E6%96%B0)) 1. ssh tunnel to RPi ```bash ssh -R 1080 tk3c@<rpi-ip> ``` 2. 確認系統 日期/時間 正確 - 在總部無法連ntp, 需手動更新時間, 確認10.1.62.97 API 正常運作 並執行 ```bash /opt/tk3c/bin/pos-calibratetime.sh ``` 4. 更新系統 :::warning 系統時間不正確 會 **更新失敗** ::: **Choose 1 of 2 of the following methods** 1. 如果 `/etc/apt/apt.conf.d/12proxy` **有設定** `Acquire::http::Proxy "socks5h//localhost:1080"`, ``` > $ cat /etc/apt/apt.conf.d/12proxy > Acquire::http::Proxy "socks5h://localhost:1080"; ``` 可執行 ```bash sudo apt update && sudo apt full-upgrade -y sudo apt autoremove ``` 2. 如果 **沒有設定**`/etc/apt/apt.conf.d/12proxy`, 可執行 ```bash sudo proxychains apt update && sudo apt full-upgrade -y sudo proxychains apt autoremove ``` :::warning - 如果 沒有安裝 `proxychains` 1. 設定 apt socks5 proxy ```bash echo 'Acquire::http::Proxy "socks5h//localhost:1080";' | sudo tee -a /etc/apt/apt.conf.d/12proxy ``` 2. 安裝 proxychains ```bash sudo apt update && sudo apt full-upgrade -y sudo apt install -y proxychains sudo apt autoremove ``` 3. 在 `/etc/proxychains.conf` 之 `[ProxyList]` section 加上 `socks5 127.0.0.1 1080` ```cfg [ProxyList] # add proxy here ... socks5 127.0.0.1 1080 ``` ::: :::info - 如果 要使用 `proxychains` 執行 `apt`, 需移除 `/etc/apt/apt.conf.d/12proxy` 的 proxy 設定 ::: #### 2. 確認程式更新 **確認所有 程式/角本 已更新至最新穩定版本** - API - `curl localhost:8080/mPOS/status` 確認版本 - Choose 1 of the following method for updating API - From 97 - Manually 1. Run `/home/tk3c/build_mpos` > build 成功時會自動上傳至IDC:`/opt/tk3c/staging/war` 3. rsync 新建置 war 至 `tk3c@<rpi>:/opt/tk3c/staging/war` ```bash rsync -avzh /opt/tk3c/staging/war/<war_file> tk3c@<rpi>:/opt/tk3c/staging/war/ ``` 3. 執行 ```bash ssh tk3c@<rpi> '/opt/tk3c/bin/pos-deployapi.sh mPOS /opt/tk3c/staging/war/<war_file>' ``` - `mpos_tool.py` 1. (Optional) Run `/home/tk3c/build_mpos` 2. 更新 deployment_version.ini 3. Run ```bash python3 mpos_tool.py deploy --only <RPi ip> ``` - From development devices - 從IDC上取得最後建置WAR檔 1. 至 https://10.254.248.41/builds/backend/api/ 選擇要部屬的war 2. 下載檔案並scp或rsync至`tk3c@<rpi>:/opt/tk3c/staging/war` 3. 執行 ```bash ssh tk3c@<rpi> '/opt/tk3c/bin/pos-deployapi.sh mPOS /opt/tk3c/staging/war/<war_file>' ``` - 自行執行 gradle 建置 war > - 取得 原始碼 `git clone http://172.16.9.53:80/IT_MPOS/mPOS.git` > - (optional) 切至 backend 分支 `git checkout backend` 1. 至 mPOS/Backend/mPOS 執行 gradle script ```cmd > .../mPOS/BackEnd/mPOS/gradlew.bat --debug -x test -S --info build -Premoterepo ``` 2. scp或rsync `mPOS/Backend/mPOS/build/libs/mPOS_<...>.war` 至`tk3c@<rpi>:/opt/tk3c/staging/war` 3. ssh 執行 `tk3c@<rpi>:/opt/tk3c/bin/pos-deployapi.sh` ```bash /opt/tk3c/bin/pos-deployapi.sh mPOS /opt/tk3c/staging/war/<war_file> ``` - From RPi - 從IDC上rsync最後建置WAR檔 1. 從 rsync 要部屬的war ```bash rsync -avzh tk3c@10.254.248.41:/opt/tk3c/staging/war/<war_file> /opt/tk3c/staging/war/ ``` 2. 執行 `/opt/tk3c/bin/pos-deployapi.sh mPOS <war_file>` - `/opt/tk3c/bin` 所有檔案 - python 與 shell script 檔直接覆蓋 ([source code](http://172.16.9.53/IT_MPOS/mPOS/src/branch/master/BackEnd/scops/mpos_oss)) > 可以從 IDC 取得所有檔案, 印表機設定檔除外 > > rsync -avzh tk3c@10.254.248.41:/opt/tk3c/staging/oss/bin/ /opt/tk3c/bin/ --exclude=tk3c_posprint.json - `/opt/tk3c/services` 所有systemd service ([source files](http://172.16.9.53/IT_MPOS/mPOS/src/branch/master/BackEnd/scops/mpos_oss/services/tk3c)) > 可以從 IDC 取得所有檔案 > > rsync -avzh tk3c@10.254.248.41:/opt/tk3c/staging/oss/services/ /opt/tk3c/services/ - 如果有更新, 更新後執行 `sudo systemctl daemon-reload` #### 3. 更新SSL憑證 - openssl 指令: 自簽憑證/重簽憑證 參 [notes: self_signed_certificates.md](http://172.16.9.53/IT_MPOS/mPOS/src/branch/master/BackEnd/scops/notes/self_signed_certificates.md) - 使用resign_certs.sh重簽憑證 (參 [certs](http://172.16.9.53/IT_MPOS/mPOS/src/branch/master/BackEnd/scops/certs)) ``` <mpos repo>/BackEnd/scops/certs/resign_certs.sh ``` - 只需把更新後的憑證 **`tk3c_mpos_server.crt`** 發布至 部屬之RPi+IDC: `/opt/tk3c/ssl` <hr/> #### SD Card Clone ##### Method 1: **SD Card Copier** (Recommended) ![](https://i.imgur.com/4q4r4j8.jpg) or ##### Method 2: **`dd`** command ```bash sudo dd bs=4M if=/dev/mmcblk0 of=/dev/sda status=progress ``` > [reference: backup](https://www.raspberrypi.org/documentation/linux/filesystem/backup.md) #### 設定檔 ##### 更改 - `/etc/hosts` ```php 127.0.0.1 localhost ::1 localhost ip6-localhost ip6-loopback ff02::1 ip6-allnodes ff02::2 ip6-allrouters 127.0.1.1 mposapi ######## SET SCDB IP ########## # 10.2.219.250 scdb.mpos.local 10.253.2.250 scdb.mpos.local ``` - `/etc/dhcpcd.conf` ```php ... # SET STATIC IP interface eth0 static ip_address=10.*.*.245/24 static routers=10.*.*.254 static domain_name_servers=10.1.1.249 10.1.1.242 ... ``` - `/opt/tk3c/bin/store_env` - 參考`/opt/tk3c/bin/store_env.sample`編輯`/opt/tk3c/bin/store_env`, 視需要修改store no, 若有多數server部署同一門市再修改scope id ```python export tk3c_store_no=705 # CHANGE STORE NO #export tk3c_scope_id=lab export tk3c_home=/opt/tk3c # modify following for TomEE's environment export TK3CLIB="/opt/tomcat/tk3c-lib" export sc_storeno="$tk3c_store_no" export sc_mqtt_broker="tcp://localhost:1883" export tk_api_header_key="X-Powered-TK" export tk_api_header_value="..." export tk_api_url="http://10.254.249.12:18718" export wish_api_url="http://10.254.248.21:8765" export pr_api_url="http://172.16.9.188" export pr_api_clientid="..." export pr_api_pwd="..." ``` - ~~`/opt/tk3c/bin/tk3c-posprint.json`~~ (Old) (20210928 All store rpi updated, use `tk3c-posprint.ini`) :::spoiler - change IP (endpoint) ```json { "printers":[ {"id":"0", "enable":true, "name":"PRN0", "type":"Dummy", "vendor":null, "model":"RP700", "endpoint":null}, {"id":"1", "enable":false, "name":"PRN1", "type":"Network", "vendor":"Epson", "model":"T70II", "endpoint":"192.168.192.168"}, {"id":"2", "enable":true, "name":"PRN2", "type":"Network", "vendor":"Partner", "model":"RP700", "endpoint":"192.168.1.251"} ], "settings":{...}, "reserved_usb":[...] } ``` ::: - `/opt/tk3c/bin/tk3c-posprint.ini` (Current) - change printer IP ```cfg [DEFAULT] broker=localhost:1883 topic=tk3c/{id}/prn/+ topic_reply=tk3c/{id}/prnjob/{sn} topic_status=tk3c/{id}/prns topic_will=tk3c/{id}/prnwill spec_key=Dt8lyToo17X/XkXaQvihuA== key=9FA6908E5DAFF6CBBCEB4CFCFDB11487 title=燦坤3C logo=/opt/tk3c/bin/tk3clogo.bmp disclaimer_einvoice= 更正內容請於開立日起五日內持電子 發票證明聯辦理，逾期恕不受理； 商品退換時請持電子發票證明聯及 銷貨明細辦理 disclaimer_receipt= 1.本單據不得作為兌獎之憑證。 2.更正內容請於開立日起五日內憑本單據辦理，逾期恕不受理。 disclaimer_donate= 提醒您,捐贈發票不得辦理兌領獎 disclaimer_deliver= (販賣約定條款) 凡客訂商品,買受人同意支付一定比例之訂金(實際訂金之金額,應依本公司規定為準),若因可歸責於"買受人"/"指定第三人"因素(例買受人留存資訊不實無法配送,經通知仍不取貨),致60日內未完成交易者,買受人同意燦坤依民法規定,沒收全部訂金並解除本買賣契約(經燦坤依販賣明細單地址發函通知取貨人時,即生解除契約效力) (安裝提醒) 除加購或贈送之「標準安裝」外,現場有「非標準安裝」之需求者,另以「工程確認書」報價收費,尤其「空調一對多系列」無贈送安裝,需額外報價收費 footer= Thanks for your shopping please come again [0] enable=1 name=PRN0 type=Dummy model=RP700 vendor=None [1] enable=0 name=PRN1 type=Network vendor=Epson model=T70II ip=192.168.192.168 [2] enable=1 name=PRN2 type=Network vendor=Partner model=RP700 ip=192.168.1.251 # update IP(各門市printer ip) e.g. ip=10.2.219.241 vid=0x076c pid=0x0302 iep=0x85 oep=2 ``` - `/etc/mosquitto/conf.d/tk3c.conf` - 編輯 mosquitto 設定檔, 視需要修改 bridge connection與topic中之store no ```python # bridge settings # connection bg219 #SET STORE NO connection bg705 address 10.254.248.41:1883 # topic tk3c/log/+/219 out 0 #SET STORE NO topic tk3c/log/+/705 out 0 topic tk3c/mpos/+ in 0 ``` :::info 變更後視狀況 重啟服務 ```bash sudo systemctl restart mosquitto.service ``` ::: ##### 檢查 - `/etc/nginx/conf.d/tk3c.conf` or ~~`/etc/nginx/sites-enabled/default`~~(20210928 removed) ```conf upstream tomcat { server 127.0.0.1:8080 weight=100 max_fails=5 fail_timeout=5; } server { listen 80; listen [::]:80; listen 443 default_server ssl; listen [::]:443 default_server ssl; include snippets/ssl-params.conf; ssl_certificate /opt/tk3c/ssl/mpos_server.crt; ssl_certificate_key /opt/tk3c/ssl/mpos_server.key; server_name _; charset UTF-8; root /var/www/html; index index.html index.nginx-debian.html; location / { try_files $uri $uri/ =404; } location /mPOS/ { proxy_pass http://tomcat/mPOS/; proxy_set_header X-Forwarded-Host $host; proxy_set_header X-Forwarded-Server $host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_hide_header 'X-Frame-Options'; add_header X-Frame-Options ALLOWALL; } location /logs/ { if ($scheme = 'http') { rewrite ^ https://$http_host$request_uri? permanent; } sendfile on; sendfile_max_chunk 1m; alias /opt/tk3c/logs/; autoindex on; autoindex_localtime on; add_header Access-Control-Allow-Origin *; default_type text/plain; } } ``` - `/etc/network/interfaces.d/eth0-subs` check ip alias same subnet as receipt printer's default ip range (192.168.1.xxx) ``` auto eth0:1 allow-hotplug eth0:1 iface eth0:1 inet static vlan-raw-device eth0 address 192.168.1.245 netmask 255.255.255.0 ``` - `/etc/wpa_supplicant/wpa_supplicant.conf` - remove auto connect wifi APs ``` ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev update_config=1 country=TW # DELETE OR COMMENT OUT CONNECTION SETTING #network={ #ssid="AP-PDA" #key_mgmt=NONE #wep_key0= #} # OR SET disabled=1 TO PREVENT AUTOMATIC CONNECTION ON BOOT network={ ssid="..." key_mgmt="..." wep_key0="..." disabled=1 } ``` #### Final check Run `/opt/tk3c/bin/check_env.sh` to check overall setting summary ### RP-700 Receipt Printer - 進入Printer設定頁面(192.168.1.251) - 點選configure interface - 預設帳號/密碼: admin/不輸入 - 更改ip address - Fixed ip address - device ip address(xxx.xxx.xxx.241) - gateway address(xxx.xxx.xxx.254) - 重啟印表機 - 確認印表機IP 成功更改 - ping xxx.xxx.xxx.241 or - 可以順利進入Printer設定頁面(xxx.xxx.xxx.241) - 測試列印 `/opt/tk3c/bin/test_print_receipt.sh` ::: success - 印表機程式重啟 sudo systemctl restart pos-print ::: <hr/> ### Mobile device [參考文件](https://10.254.248.41/tk3c/) * 憑證 + 憑證安裝 已改由MDM統一推送 + 憑證確認 由以下步驟確認憑證已安裝且啟用 ![CA1](https://i.imgur.com/uAklv7z.png) ![CA2](https://i.imgur.com/VXzglum.png) ![CA3](https://i.imgur.com/4qUO3k4.png) * 裝置管理設定 [管理後台](https://10.254.248.41/tk3c/admin/) device設定步驟 ![reg_step01](https://i.imgur.com/jnc0Ezt.png) ![reg_step02](https://i.imgur.com/1tJ3UBx.png) 只需設定Device sn、deployment Device sn 使用 IPAD sn deployment 設定參考: ```javascript { "api":"10.1.62.97", //rpi ip "termNo":"0025", // POS機號 "storeNo":"705", // 店號 "broker":"" // MQTT Broker uri目前不需設定 } ``` ![reg_step03](https://i.imgur.com/pJl05Pr.png) * MPOS安裝 + 開啟安裝頁面 <https://10.254.248.41/tk3c/mdm> ![PWA1](https://i.imgur.com/AWCNg4C.png) ![PWA2](https://i.imgur.com/x5Xa6wo.jpg) ![PWA3](https://i.imgur.com/4yGMTYu.png) ![PWA4](https://i.imgur.com/I75SFCO.png) ![PWA5](https://i.imgur.com/9TionmS.png) ![PWA6](https://i.imgur.com/fbqwlWT.jpg) * [掃描器配對](https://hackmd.io/SIA4rdAjQ_GntkYL2aO12w?view#%E6%A2%9D%E7%A2%BC%E6%8E%83%E6%8F%8F%E5%99%A8) --- ## [門市安裝](https://hackmd.io/SIA4rdAjQ_GntkYL2aO12w) ## 問題排除 ### 門市連線 示範軟體[mobaxterm](https://mobaxterm.mobatek.net/) * add new session ![](https://i.imgur.com/f39Mbo5.png) * SSH設定 * remote host=門市rpi ip ![](https://i.imgur.com/25voYNh.png) * 輸入帳號、密碼 ### 印表機 ```bash #查詢印表機連接 systemctl list-unit-files pos-print.service #查詢印表機狀態 systemctl status pos-print #印表機服務重啟 sudo systemctl restart pos-print #遠端測試列印(不是每台都有放test_print_receipt.sh) /opt/tk3c/bin/test_print_receipt.sh ``` ### API ```bash # 狀態查詢 sudo systemctl status tomcat # 重啟Tomee sudo systemctl restart tomcat ``` ### MQTT ```bash # 重啟 sudo systemctl restart mosquitto ```