# How to Connect Canon Pixma Pro-100 Setup Printer
If you're seeking guidance on connecting your Canon Pixma Pro-100 printer, the most straightforward method is using the WPS (Wi-Fi Protected Setup) button. Some routers have a WPS button, allowing devices like your printer to connect to the Wi-Fi network without a passphrase.


## Solution 1: WPS Connection Method

1. Ensure your printer is turned on.
2. Press and hold the Wi-Fi button on the printer until the power flashes twice, then release it.
3. Press the WPS button on the access point within 2 minutes.
4. The blue Wi-Fi lamp on the printer will be on, indicating the connection process.
5. During setup, the white power lamp will blink.
6. Successful connection is indicated when both lamps stop blinking.

### Confirming the Connection:

1. Load pages into the printer.
2. Hold the 'Resume' or 'Cancel' button until the white power light blinks six times and release.
3. Print the network information page to verify the connection status.

## Solution 2: Standard Connection Method on Windows

If your access point lacks a WPS button, use the Standard Connection Method:

1. Insert the Setup CD-ROM or download the software from Canon's official website.
2. Run the setup file.
3. Choose 'Wireless LAN Connection' and follow the on-screen instructions.
4. Select your printer from the list and proceed with the Setup Guide Installation.
5. Choose 'Cableless setup' and follow the prompts, including holding down the Wi-Fi button on the printer.
6. Wait for the printer connection to the access point.
7. Complete the software installation by agreeing to the license agreement.
8. Execute a test print to ensure the printer is working correctly.
9. Optionally, register your printer and agree or disagree with the extended survey program.
10. Click 'Exit' to complete the installation.

### Network Setting Reset:

To reset network settings, press and hold the 'Resume/Cancel' button until the white power lamp blinks 15 times. Note that this erases all network settings, requiring reconfiguration.

For assistance, call 1-888-479-9644.

Remember to configure a new network setting after resetting to enable printing and scanning over the network.