---
# System prepended metadata

title: 'How to set up SmartDNS on router: 4 steps for any service'

---

# How to set up SmartDNS on router: 4 steps for any service

Learning how to configure a SmartDNS service directly on your home router is the definitive *set it and forget it* solution for unlocking global streaming content on **every device** connected to your network. As an expert who has managed numerous network configurations, I find this method to be the most powerful and efficient way to overcome frustrating geo-restrictions.
![how-to-set-up-smart-dns-on-route](https://hackmd.io/_uploads/HkRopr3gZl.jpg)


## 1. SmartDNS on Router vs. on a Device: Why the Router is Better

I always recommend the router-level setup over configuring each device individually. The initial 10-minute router configuration is an investment that saves **hours** of repetitive work down the line. The router acts as the **master switch**, broadcasting the SmartDNS access to every single connected client, regardless of its operating system or inherent network restrictions.

| Aspect | Router Setup (The Master Switch) | Device-by-Device Setup |
| :--- | :--- | :--- |
| **Coverage** | Universal, network-wide coverage for all devices. | Limited; only works on the single device configured. |
| **Compatibility** | Essential for devices like gaming consoles, Roku, or Smart TVs that often restrict network setting changes. | Not possible on some common streaming devices. |
| **Convenience** | Automatic and effortless. New devices are instantly covered. | Tedious, repetitive, and must be updated on every device. |

The choice is clear: for a truly seamless streaming experience, the router is the superior, long-term solution.

## 2. Before You Begin: What You'll Need

I need two essential components prepared before accessing the router’s administrative panel.

### 2.1. A Reliable SmartDNS Service

A SmartDNS is a subscribed service. I advise getting a service that is **bundled with a top-tier VPN**, such as ExpressVPN's "MediaStreamer" or NordVPN's "SmartDNS." This gives you both the SmartDNS for your TV/consoles and a full VPN for secure, encrypted browsing on other devices. The provider will give you the two required DNS server addresses.

### 2.2. Your Router's Login Details

You need the credentials to access your router’s "cockpit":

* **Router's IP Address:** This is the login page address, typically `192.168.1.1` or `192.168.0.1`.
* **Username and Password:** If you haven't changed them, the defaults are likely printed on a sticker on the **bottom or back of the router**.
* **Finding the IP:** If the sticker is missing, you can find the IP address (known as the "Default Gateway") in your computer's network settings (e.g., using `ipconfig` on Windows).

> **Important:** Some Internet Service Provider (ISP) routers have locked-down settings. If you can’t find the DNS options, you may need to upgrade to a third-party router to gain full control.

## 3. The General 4-Step Setup Process

No matter the brand, the fundamental process for setting up SmartDNS is always the same. The goal is to swap the default DNS servers with the custom ones from the SmartDNS provider.

1.  **Retrieve Addresses:** Log in to your SmartDNS provider's website to get the specific Primary and Secondary DNS server addresses.
2.  **Access Router:** Log into your router’s admin panel using the IP address and your credentials.
3.  **Find DNS Settings:** Navigate to the DNS configuration section, which is usually located under **"WAN," "Internet,"** or **"Network"** settings.
4.  **Enter and Apply:** Replace the existing DNS server numbers with the new SmartDNS addresses, click **"Save"** or **"Apply,"** and then restart the router.

## 4. Specific Configuration Examples

Here are the precise steps for popular router brands:

### 4.1. Netgear

1.  Log in and find the **"Internet"** tab.
2.  Locate the **"Domain Name Server (DNS) Address"** section.
3.  Select **“Use these DNS Servers.”**
4.  Enter the SmartDNS addresses into “Primary DNS” and “Secondary DNS.”
5.  Click **“Apply.”**

### 4.2. Asus

1.  Log into AsusWRT and go to **“Advanced Settings”** > **“WAN.”**
2.  In the **“WAN DNS Setting”** area, change **“Connect to DNS Server automatically”** to **“No”** or “Manual.”
3.  Input the SmartDNS addresses into “DNS Server1” and “DNS Server2.”
4.  Click **“Apply.”**

## 5. The Most Important Final Step: Activate Your IP Address

I must stress that you are **not quite done** after configuring the router. If you skip this final step, the SmartDNS will not work.

You need to authorize your home’s public IP address with the SmartDNS service.

1.  **Restart Your Router:** Reboot it to ensure the new DNS settings are active.
2.  **Go to Provider's Website:** On a connected device, log into your SmartDNS account dashboard.
3.  **Click Activate:** Find the button labeled something like **“Activate my IP address”** or **“Register my IP”** in the SmartDNS section and click it.

## 6. SmartDNS and Dynamic IP: The DDNS Solution

If your streaming access mysteriously stops working after a few days, the culprit is almost always your Internet Service Provider (ISP) changing your **dynamic IP address**. Your SmartDNS no longer recognizes you.

The professional solution is to set up **Dynamic DNS (DDNS)**. This feature, offered by most top-tier providers, gives you a permanent hostname that automatically updates your registered IP address whenever it changes. Setting up DDNS is the final step for a truly permanent, maintenance-free global streaming system.

Unlock all insights here: https://safelyo.com/how-to-set-up-smartdns-on-router/

#SmartDNS
#RouterHacks
#GeoUnblocking
#Safelyo
#MichaelDang