Conic Governance Votes

# Conic Governance Votes A document outlining the governance votes to be held prior to the launch of the Coin Omnipools. ### Voting schedule - Vote 1 - Vote 2, 3, 4, 5 at same time - Vote 6, 7, 8, 9 at same time One per week for 3 weeks total voting # Vote 1 [Which underlying assets should we support on launch] This vote is for which underlying assets should have Conic Omnipools on launch. Note that only USD pegged assets are included in this list currently. Also, only assets that have at least two usable Curve Pools with significant TVL are included. The Conic Omnipools will also non-usd pegged assets such as `ETH` and `WBTC`, but to simplify the launch we will raise separate votes to add them later. The vote is multi-choice, you can vote for as many pools as you like. Vote options: - **USDC** - **FRAX** - **DAI** - **USDT** A pool must receive at least 50% support to be included for launch (pools can always be added again later). At least one asset must be supported, if no assets receive support of at least 50%, the asset with the highest vote will be the only one supported. # Vote 2 [Which Curve Pools to use for USDC] This vote is to decide which Curve Pools should have liquidity allocated on launch. There will be a separate vote after this for the specific liquidity distribution between these pools. The vote is multi-choice, you can vote for as many pools as you like. Only pools are included that have a Chainlink Oracle for all underlying tokens as this is currently a requirement for the Conic LP Token pricing. And only pools are included that have at least 20m of TVL currently. Vote options: - **fraxusdc** [FRAX+USDC] - **frax** [FRAX+3CRV] - **mim** [MIM+3CRV] - **tusd** [tUSD+3CRV] - **3pool** [DAI+USDC+USDT] - **sUSD** [DAI+USDC+USDT+sUSD] - **busdv2** [BUSD+3CRV] - **tusdfraxbp** [TUSD+FRAXBP] - **gusdfraxbp** [GUSD+FRAXBP] - **busdfraxbp** [BUSD+FRAXBP] A pool must receive at least 34% support to be included for launch (pools can always be added or removed later). A minimum of two pools must be included, if less than two pools receive 34% support, then the top two pools will be chosen. A maximum of four pools can be included in this initial launch (more can still be added later). If more than four pools pass the inclusion threshold, the top four will be chosen based on votes. # Vote 3 [Which Curve Pools to use for FRAX] This vote is to decide which Curve Pools should have liquidity allocated on launch. There will be a separate vote after this for the specific liquidity distribution between these pools. The vote is multi-choice, you can vote for as many pools as you like. Only pools are included that have a Chainlink Oracle for all underlying tokens as this is currently a requirement for the Conic LP Token pricing. And only pools are included that have at least 20m of TVL currently. Vote options: - **fraxusdc** [FRAX+USDC] - **frax** [FRAX+3CRV] - **tusdfraxbp** [TUSD+FRAXBP] - **gusdfraxbp** [GUSD+FRAXBP] - **busdfraxbp** [BUSD+FRAXBP] A pool must receive at least 25% support to be included for launch (pools can always be added or removed later). A minimum of two pools must be included, if less than two pools receive 25% support, then the top two pools will be chosen. A maximum of four pools can be included in this initial launch (more can still be added later). If more than four pools pass the inclusion threshold, the top four will be chosen based on votes. # Vote 4 [Which Curve Pools to use for DAI] This vote is to decide which Curve Pools should have liquidity allocated on launch. There will be a separate vote after this for the specific liquidity distribution between these pools. The vote is multi-choice, you can vote for as many pools as you like. Only pools are included that have a Chainlink Oracle for all underlying tokens as this is currently a requirement for the Conic LP Token pricing. And only pools are included that have at least 20m of TVL currently. Vote options: - **frax** [FRAX+3CRV] - **mim** [MIM+3CRV] - **tusd** [tUSD+3CRV] - **3pool** [DAI+USDC+USDT] - **sUSD** [DAI+USDC+USDT+sUSD] - **busdv2** [BUSD+3CRV] A pool must receive at least 25% support to be included for launch (pools can always be added or removed later). A minimum of two pools must be included, if less than two pools receive 25% support, then the top two pools will be chosen. A maximum of four pools can be included in this initial launch (more can still be added later). If more than four pools pass the inclusion threshold, the top four will be chosen based on votes. # Vote 5 [Which Curve Pools to use for USDT] This vote is to decide which Curve Pools should have liquidity allocated on launch. There will be a separate vote after this for the specific liquidity distribution between these pools. The vote is multi-choice, you can vote for as many pools as you like. Only pools are included that have a Chainlink Oracle for all underlying tokens as this is currently a requirement for the Conic LP Token pricing. And only pools are included that have at least 20m of TVL currently. Vote options: - **frax** [FRAX+3CRV] - **mim** [MIM+3CRV] - **tusd** [tUSD+3CRV] - **3pool** [DAI+USDC+USDT] - **sUSD** [DAI+USDC+USDT+sUSD] - **busdv2** [BUSD+3CRV] A pool must receive at least 25% support to be included for launch (pools can always be added or removed later). A minimum of two pools must be included, if less than two pools receive 25% support, then the top two pools will be chosen. A maximum of four pools can be included in this initial launch (more can still be added later). If more than four pools pass the inclusion threshold, the top four will be chosen based on votes. # Vote 6 [What should the initial distribution be for USDC] This vote is to decide the initial distribution of USDC between the supported Curve Pools. You can vote for all pools as a percent split between them, i.e. `50%` to `FRAX+3CRV`, `25%` to `MIM+3CRV` and `25%` to `tUSD+3CRV`. Vote options: - [whatever the included pools were from the previous vote] The allocation between the Curve Pools will be based on the total percent votes for each of the Curve Pools. # Vote 7 [What should the initial distribution be for FRAX] This vote is to decide the initial distribution of USDC between the supported Curve Pools. You can vote for all pools as a percent split between them, i.e. `50%` to `FRAX+3CRV`, `25%` to `MIM+3CRV` and `25%` to `tUSD+3CRV`. Vote options: - [whatever the included pools were from the previous vote] The allocation between the Curve Pools will be based on the total percent votes for each of the Curve Pools. # Vote 8 [What should the initial distribution be for DAI] This vote is to decide the initial distribution of USDC between the supported Curve Pools. You can vote for all pools as a percent split between them, i.e. `50%` to `FRAX+3CRV`, `25%` to `MIM+3CRV` and `25%` to `tUSD+3CRV`. Vote options: - [whatever the included pools were from the previous vote] The allocation between the Curve Pools will be based on the total percent votes for each of the Curve Pools. # Vote 9 [What should the initial distribution be for USDT] This vote is to decide the initial distribution of USDC between the supported Curve Pools. You can vote for all pools as a percent split between them, i.e. `50%` to `FRAX+3CRV`, `25%` to `MIM+3CRV` and `25%` to `tUSD+3CRV`. Vote options: - [whatever the included pools were from the previous vote] The allocation between the Curve Pools will be based on the total percent votes for each of the Curve Pools.