---
# System prepended metadata

title: laravel upgrade 手順(5.5 to 6.0)

---

# laravel upgrade 手順(5.5 to 6.0)

## phpアップグレード(7.1 to 7.3)

1. 使わないyumリポジトリを無効化

現状確認
`$ sudo yum repolist all`

```
enabledの値を0にすると無効になる
$ sudo vim /etc/yum.repos.d/nodesource-el7.repo 

[nodesource]
name=Node.js Packages for Enterprise Linux 7 - $basearch
baseurl=https://rpm.nodesource.com/pub_8.x/el/7/$basearch
failovermethod=priority
enabled=0
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/NODESOURCE-GPG-SIGNING-KEY-EL

[nodesource-source]
name=Node.js for Enterprise Linux 7 - $basearch - Source
baseurl=https://rpm.nodesource.com/pub_8.x/el/7/SRPMS
failovermethod=priority
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/NODESOURCE-GPG-SIGNING-KEY-EL
gpgcheck=1
```

```
$ sudo vim /etc/yum.repos.d/docker-ce.repo 

[docker-ce-stable]
name=Docker CE Stable - $basearch
baseurl=https://download.docker.com/linux/centos/7/$basearch/stable
enabled=0
gpgcheck=1
gpgkey=https://download.docker.com/linux/centos/gpg

[docker-ce-stable-debuginfo]
name=Docker CE Stable - Debuginfo $basearch
baseurl=https://download.docker.com/linux/centos/7/debug-$basearch/stable
enabled=0
gpgcheck=1
gpgkey=https://download.docker.com/linux/centos/gpg

[docker-ce-stable-source]
name=Docker CE Stable - Sources
baseurl=https://download.docker.com/linux/centos/7/source/stable
enabled=0
gpgcheck=1
gpgkey=https://download.docker.com/linux/centos/gpg

[docker-ce-edge]
name=Docker CE Edge - $basearch
baseurl=https://download.docker.com/linux/centos/7/$basearch/edge
enabled=0
gpgcheck=1
gpgkey=https://download.docker.com/linux/centos/gpg
```

不要なリポジトリが無効になっていることを確認
(amzn-main-Baseとamzn-updates-Baseだけ有効になってればok。)
```
$ sudo yum repolist all
読み込んだプラグイン:priorities, update-motd, upgrade-helper
リポジトリー ID                                                   リポジトリー名                                                                                   状態
!amzn-main/latest                                                 amzn-main-Base                                                                                   有効: 5,934
amzn-main-debuginfo/latest                                        amzn-main-debuginfo                                                                              無効
amzn-main-source/latest                                           amzn-main-source                                                                                 無効
amzn-nosrc/latest                                                 amzn-nosrc-Base                                                                                  無効
amzn-preview/latest                                               amzn-preview-Base                                                                                無効
amzn-preview-debuginfo/latest                                     amzn-preview-debuginfo                                                                           無効
amzn-preview-source/latest                                        amzn-preview-source                                                                              無効
!amzn-updates/latest                                              amzn-updates-Base                                                                                有効: 3,288
amzn-updates-debuginfo/latest                                     amzn-updates-debuginfo                                                                           無効
amzn-updates-source/latest                                        amzn-updates-source                                                                              無効
docker-ce-edge/x86_64                                             Docker CE Edge - x86_64                                                                          無効
docker-ce-edge-debuginfo/x86_64                                   Docker CE Edge - Debuginfo x86_64                                                                無効
docker-ce-edge-source                                             Docker CE Edge - Sources                                                                         無効
docker-ce-nightly/x86_64                                          Docker CE Nightly - x86_64                                                                       無効
docker-ce-nightly-debuginfo/x86_64                                Docker CE Nightly - Debuginfo x86_64                                                             無効
docker-ce-nightly-source                                          Docker CE Nightly - Sources                                                                      無効
docker-ce-stable/x86_64                                           Docker CE Stable - x86_64                                                                        無効
docker-ce-stable-debuginfo/x86_64                                 Docker CE Stable - Debuginfo x86_64                                                              無効
docker-ce-stable-source                                           Docker CE Stable - Sources                                                                       無効
docker-ce-test/x86_64                                             Docker CE Test - x86_64                                                                          無効
docker-ce-test-debuginfo/x86_64                                   Docker CE Test - Debuginfo x86_64                                                                無効
docker-ce-test-source                                             Docker CE Test - Sources                                                                         無効
!epel/x86_64                                                      Extra Packages for Enterprise Linux 6 - x86_64                                                   無効
epel-debuginfo/x86_64                                             Extra Packages for Enterprise Linux 6 - x86_64 - Debug                                           無効
epel-source/x86_64                                                Extra Packages for Enterprise Linux 6 - x86_64 - Source                                          無効
epel-testing/x86_64                                               Extra Packages for Enterprise Linux 6 - Testing - x86_64                                         無効
epel-testing-debuginfo/x86_64                                     Extra Packages for Enterprise Linux 6 - Testing - x86_64 - Debug                                 無効
epel-testing-source/x86_64                                        Extra Packages for Enterprise Linux 6 - Testing - x86_64 - Source                                無効
nodesource/x86_64                                                 Node.js Packages for Enterprise Linux 7 - x86_64                                                 無効
nodesource-source                                                 Node.js for Enterprise Linux 7 - x86_64 - Source                                                 無効
```

2. リポジトリアップデート
`$ sudo yum update -y`

3. httpd.conf退避
`$ sudo cp /etc/httpd/conf/httpd.conf /home/ec2-user`

4. インストール済みのphp、httpdパッケージを確認
```
$ sudo yum list installed | grep php
php71.x86_64                         7.1.33-1.43.amzn1             @amzn-updates
php71-cli.x86_64                     7.1.33-1.43.amzn1             @amzn-updates
php71-common.x86_64                  7.1.33-1.43.amzn1             @amzn-updates
php71-devel.x86_64                   7.1.33-1.43.amzn1             @amzn-updates
php71-gd.x86_64                      7.1.33-1.43.amzn1             @amzn-updates
php71-json.x86_64                    7.1.33-1.43.amzn1             @amzn-updates
php71-mbstring.x86_64                7.1.33-1.43.amzn1             @amzn-updates
php71-mysqlnd.x86_64                 7.1.33-1.43.amzn1             @amzn-updates
php71-pdo.x86_64                     7.1.33-1.43.amzn1             @amzn-updates
php71-process.x86_64                 7.1.33-1.43.amzn1             @amzn-updates
php71-xml.x86_64                     7.1.33-1.43.amzn1             @amzn-updates
```

```
$ sudo yum list installed | grep httpd
httpd24.x86_64                       2.4.41-1.88.amzn1             @amzn-updates
httpd24-tools.x86_64                 2.4.41-1.88.amzn1             @amzn-updates
```

5. phpパッケージ(7.1系)を削除
`$ sudo yum remove php71* -y`

6. httpdパッケージを削除
`$ sudo yum remove httpd24* -y`

7. php7.3系のパッケージをインストール
`$ sudo yum install php73.x86_64 php73-cli.x86_64 php73-common.x86_64 php73-devel.x86_64 php73-json.x86_64 php73-mbstring.x86_64 php73-mysqlnd.x86_64 php73-process.x86_64 php73-xml.x86_64 php73-pdo.x86_64 -y`

8. 確認
```
$ sudo yum list installed | grep php
php73.x86_64                         7.3.11-1.21.amzn1             @amzn-updates
php73-cli.x86_64                     7.3.11-1.21.amzn1             @amzn-updates
php73-common.x86_64                  7.3.11-1.21.amzn1             @amzn-updates
php73-json.x86_64                    7.3.11-1.21.amzn1             @amzn-updates
php73-mbstring.x86_64                7.3.11-1.21.amzn1             @amzn-updates
php73-mysqlnd.x86_64                 7.3.11-1.21.amzn1             @amzn-updates
php73-pdo.x86_64                     7.3.11-1.21.amzn1             @amzn-updates
php73-process.x86_64                 7.3.11-1.21.amzn1             @amzn-updates
php73-xml.x86_64                     7.3.11-1.21.amzn1             @amzn-updates
```

```
$ sudo yum list installed | grep httpd
httpd24.x86_64                       2.4.41-1.88.amzn1             @amzn-updates
httpd24-tools.x86_64                 2.4.41-1.88.amzn1             @amzn-updates
```

```
$ php -v
PHP 7.3.11 (cli) (built: Oct 31 2019 18:30:52) ( NTS )
Copyright (c) 1997-2018 The PHP Group
Zend Engine v3.3.11, Copyright (c) 1998-2018 Zend Technologies
```

9. apache設定ファイル復元と再起動
`$ sudo cp /home/ec2-user/httpd.conf /etc/httpd/conf/httpd.conf`
`$ sudo service httpd restart`

参考 httpd.conf
```
#
# This is the main Apache HTTP server configuration file.  It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.4/> for detailed information.
# In particular, see 
# <URL:http://httpd.apache.org/docs/2.4/mod/directives.html>
# for a discussion of each configuration directive.
#
# Do NOT simply read the instructions in here without understanding
# what they do.  They're here only as hints or reminders.  If you are unsure
# consult the online docs. You have been warned.  
#
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path.  If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so 'log/access_log'
# with ServerRoot set to '/www' will be interpreted by the
# server as '/www/log/access_log', where as '/log/access_log' will be
# interpreted as '/log/access_log'.

#
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# Do not add a slash at the end of the directory path.  If you point
# ServerRoot at a non-local disk, be sure to specify a local disk on the
# Mutex directive, if file-based mutexes are used.  If you wish to share the
# same ServerRoot for multiple httpd daemons, you will need to change at
# least PidFile.
#
ServerRoot "/etc/httpd"

#
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
#
# Change this to Listen on specific IP addresses as shown below to 
# prevent Apache from glomming onto all bound IP addresses.
#
#Listen 12.34.56.78:80
Listen 80

#<VirtualHost *:80>
#RewriteEngine On
#RewriteCond %{HTTP:X-Forwarded-Proto} =http
#RewriteRule .* https://%{HTTP:Host}%{REQUEST_URI} [L,R=permanent]
#</VirtualHost>

#NameVirtualHost *:80
#<VirtualHost *:80>
# ServerName any
# <Location />
#  Order Deny,Allow
#  Deny from all
# # Require all granted
# </Location>
#</VirtualHost>
#<VirtualHost *:80>
# ServerName cenq-staging.work
# DocumentRoot /var/www/cenq/public
#</VirtualHost>


#<VirtualHost *:80>
#       ServerName any
#       <Location />
#             Order deny,allow
#             Deny from all
#       </Location>
#</VirtualHost>

#
# Dynamic Shared Object (DSO) Support
#
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
#
# Example:
# LoadModule foo_module modules/mod_foo.so
#
Include conf.modules.d/*.conf

#
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.  
#
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
#
User apache
Group apache

# 'Main' server configuration
#
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition.  These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
#
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
#

#
# ServerAdmin: Your address, where problems with the server should be
# e-mailed.  This address appears on some server-generated pages, such
# as error documents.  e.g. admin@your-domain.com
#
ServerAdmin root@localhost

#
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
#
# If your host doesn't have a registered DNS name, enter its IP address here.
#
#ServerName www.example.com:80

#
# Deny access to the entirety of your server's filesystem. You must
# explicitly permit access to web content directories in other 
# <Directory> blocks below.
#
<Directory />
    AllowOverride none
    Require all denied
</Directory>

#
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
#

#
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
#
DocumentRoot "/var/www/cenq/public"
#DocumentRoot "/var/www/html"


#
# Relax access to content within /var/www.
#
#<Directory "/var/www">
#    AllowOverride None
#    # Allow open access:
#    Require all granted
#</Directory>

# Further relax access to the default document root:
<Directory "/var/www/cenq/public">
#<Directory "/var/www/html">
    #
    # Possible values for the Options directive are "None", "All",
    # or any combination of:
    #   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
    #
    # Note that "MultiViews" must be named *explicitly* --- "Options All"
    # doesn't give it to you.
    #
    # The Options directive is both complicated and important.  Please see
    # http://httpd.apache.org/docs/2.4/mod/core.html#options
    # for more information.
    #
    Options Indexes FollowSymLinks

    #
    # AllowOverride controls what directives may be placed in .htaccess files.
    # It can be "All", "None", or any combination of the keywords:
    #   Options FileInfo AuthConfig Limit
    #
    AllowOverride All 
    #
    # Controls who can get stuff from this server.
    #
    Require all granted
</Directory>

#
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
#
<IfModule dir_module>
    DirectoryIndex index.php
</IfModule>

#
# The following lines prevent .htaccess and .htpasswd files from being 
# viewed by Web clients. 
#
<Files ".ht*">
    Require all denied
</Files>

#
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here.  If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
#
ErrorLog "logs/error_log"

#
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
LogLevel warn

<IfModule log_config_module>
    #
    # The following directives define some format nicknames for use with
    # a CustomLog directive (see below).
    #
    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
    LogFormat "%h %l %u %t \"%r\" %>s %b" common

    <IfModule logio_module>
      # You need to enable mod_logio.c to use %I and %O
      LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
    </IfModule>

    #
    # The location and format of the access logfile (Common Logfile Format).
    # If you do not define any access logfiles within a <VirtualHost>
    # container, they will be logged here.  Contrariwise, if you *do*
    # define per-<VirtualHost> access logfiles, transactions will be
    # logged therein and *not* in this file.
    #
    #CustomLog "logs/access_log" common

    #
    # If you prefer a logfile with access, agent, and referer information
    # (Combined Logfile Format) you can use the following directive.
    #
    CustomLog "logs/access_log" combined
</IfModule>

<IfModule alias_module>
    #
    # Redirect: Allows you to tell clients about documents that used to 
    # exist in your server's namespace, but do not anymore. The client 
    # will make a new request for the document at its new location.
    # Example:
    # Redirect permanent /foo http://www.example.com/bar

    #
    # Alias: Maps web paths into filesystem paths and is used to
    # access content that does not live under the DocumentRoot.
    # Example:
    # Alias /webpath /full/filesystem/path
    #
    # If you include a trailing / on /webpath then the server will
    # require it to be present in the URL.  You will also likely
    # need to provide a <Directory> section to allow access to
    # the filesystem path.

    #
    # ScriptAlias: This controls which directories contain server scripts. 
    # ScriptAliases are essentially the same as Aliases, except that
    # documents in the target directory are treated as applications and
    # run by the server when requested rather than as documents sent to the
    # client.  The same rules about trailing "/" apply to ScriptAlias
    # directives as to Alias.
    #
    ScriptAlias /cgi-bin/ "/var/www/cgi-bin/"

</IfModule>

#
# "/var/www/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
#
<Directory "/var/www/cgi-bin">
    AllowOverride None
    Options None
    Require all granted
</Directory>

<IfModule mime_module>
    #
    # TypesConfig points to the file containing the list of mappings from
    # filename extension to MIME-type.
    #
    TypesConfig /etc/mime.types

    #
    # AddType allows you to add to or override the MIME configuration
    # file specified in TypesConfig for specific file types.
    #
    #AddType application/x-gzip .tgz
    #
    # AddEncoding allows you to have certain browsers uncompress
    # information on the fly. Note: Not all browsers support this.
    #
    #AddEncoding x-compress .Z
    #AddEncoding x-gzip .gz .tgz
    #
    # If the AddEncoding directives above are commented-out, then you
    # probably should define those extensions to indicate media types:
    #
    AddType application/x-compress .Z
    AddType application/x-gzip .gz .tgz

    #
    # AddHandler allows you to map certain file extensions to "handlers":
    # actions unrelated to filetype. These can be either built into the server
    # or added with the Action directive (see below)
    #
    # To use CGI scripts outside of ScriptAliased directories:
    # (You will also need to add "ExecCGI" to the "Options" directive.)
    #
    #AddHandler cgi-script .cgi

    # For type maps (negotiated resources):
    #AddHandler type-map var

    #
    # Filters allow you to process content before it is sent to the client.
    #
    # To parse .shtml files for server-side includes (SSI):
    # (You will also need to add "Includes" to the "Options" directive.)
    #
    AddType text/html .shtml
    AddOutputFilter INCLUDES .shtml
</IfModule>

#
# Specify a default charset for all content served; this enables
# interpretation of all content as UTF-8 by default.  To use the 
# default browser choice (ISO-8859-1), or to allow the META tags
# in HTML content to override this choice, comment out this
# directive:
#
AddDefaultCharset UTF-8

<IfModule mime_magic_module>
    #
    # The mod_mime_magic module allows the server to use various hints from the
    # contents of the file itself to determine its type.  The MIMEMagicFile
    # directive tells the module where the hint definitions are located.
    #
    MIMEMagicFile conf/magic
</IfModule>

#
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
#
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
#

#
# EnableMMAP and EnableSendfile: On systems that support it, 
# memory-mapping or the sendfile syscall may be used to deliver
# files.  This usually improves server performance, but must
# be turned off when serving from networked-mounted 
# filesystems or if support for these functions is otherwise
# broken on your system.
# Defaults if commented: EnableMMAP On, EnableSendfile Off
#
#EnableMMAP off
EnableSendfile on

# Supplemental configuration
#
# Load config files in the "/etc/httpd/conf.d" directory, if any.
IncludeOptional conf.d/*.conf
```
10. mysqld再起動
`$ sudo service mysqld restart`

11. 確認
ブラウザで動作を確認する。

## Laravel upgrade

1. 最新ソースを取得
`$ git fetch ~`
`$ git checkout ~`

2. composer update
`$ composer update`

※ メモリが足りない旨のエラーが出た場合はスワップを作成してからcomposer update
```
$ sudo /bin/dd if=/dev/zero of=/var/swap.1 bs=1M count=1024
$ sudo /sbin/mkswap /var/swap.1
$ sudo /sbin/swapon /var/swap.1

$ composer update
```

3. cacheクリア
```
$ composer dump-autoload
$ php artisan config:cache
$ php artisan view:clear
$ php artisan cache:clear
```

4. 確認
ブラウザでアクセスし動作を確認する。