# laravel upgrade 手順(5.5 to 6.0) ## phpアップグレード(7.1 to 7.3) 1. 使わないyumリポジトリを無効化 現状確認 `$ sudo yum repolist all` ``` enabledの値を0にすると無効になる $ sudo vim /etc/yum.repos.d/nodesource-el7.repo [nodesource] name=Node.js Packages for Enterprise Linux 7 - $basearch baseurl=https://rpm.nodesource.com/pub_8.x/el/7/$basearch failovermethod=priority enabled=0 gpgcheck=1 gpgkey=file:///etc/pki/rpm-gpg/NODESOURCE-GPG-SIGNING-KEY-EL [nodesource-source] name=Node.js for Enterprise Linux 7 - $basearch - Source baseurl=https://rpm.nodesource.com/pub_8.x/el/7/SRPMS failovermethod=priority enabled=0 gpgkey=file:///etc/pki/rpm-gpg/NODESOURCE-GPG-SIGNING-KEY-EL gpgcheck=1 ``` ``` $ sudo vim /etc/yum.repos.d/docker-ce.repo [docker-ce-stable] name=Docker CE Stable - $basearch baseurl=https://download.docker.com/linux/centos/7/$basearch/stable enabled=0 gpgcheck=1 gpgkey=https://download.docker.com/linux/centos/gpg [docker-ce-stable-debuginfo] name=Docker CE Stable - Debuginfo $basearch baseurl=https://download.docker.com/linux/centos/7/debug-$basearch/stable enabled=0 gpgcheck=1 gpgkey=https://download.docker.com/linux/centos/gpg [docker-ce-stable-source] name=Docker CE Stable - Sources baseurl=https://download.docker.com/linux/centos/7/source/stable enabled=0 gpgcheck=1 gpgkey=https://download.docker.com/linux/centos/gpg [docker-ce-edge] name=Docker CE Edge - $basearch baseurl=https://download.docker.com/linux/centos/7/$basearch/edge enabled=0 gpgcheck=1 gpgkey=https://download.docker.com/linux/centos/gpg ``` 不要なリポジトリが無効になっていることを確認 (amzn-main-Baseとamzn-updates-Baseだけ有効になってればok。) ``` $ sudo yum repolist all 読み込んだプラグイン:priorities, update-motd, upgrade-helper リポジトリー ID リポジトリー名 状態 !amzn-main/latest amzn-main-Base 有効: 5,934 amzn-main-debuginfo/latest amzn-main-debuginfo 無効 amzn-main-source/latest amzn-main-source 無効 amzn-nosrc/latest amzn-nosrc-Base 無効 amzn-preview/latest amzn-preview-Base 無効 amzn-preview-debuginfo/latest amzn-preview-debuginfo 無効 amzn-preview-source/latest amzn-preview-source 無効 !amzn-updates/latest amzn-updates-Base 有効: 3,288 amzn-updates-debuginfo/latest amzn-updates-debuginfo 無効 amzn-updates-source/latest amzn-updates-source 無効 docker-ce-edge/x86_64 Docker CE Edge - x86_64 無効 docker-ce-edge-debuginfo/x86_64 Docker CE Edge - Debuginfo x86_64 無効 docker-ce-edge-source Docker CE Edge - Sources 無効 docker-ce-nightly/x86_64 Docker CE Nightly - x86_64 無効 docker-ce-nightly-debuginfo/x86_64 Docker CE Nightly - Debuginfo x86_64 無効 docker-ce-nightly-source Docker CE Nightly - Sources 無効 docker-ce-stable/x86_64 Docker CE Stable - x86_64 無効 docker-ce-stable-debuginfo/x86_64 Docker CE Stable - Debuginfo x86_64 無効 docker-ce-stable-source Docker CE Stable - Sources 無効 docker-ce-test/x86_64 Docker CE Test - x86_64 無効 docker-ce-test-debuginfo/x86_64 Docker CE Test - Debuginfo x86_64 無効 docker-ce-test-source Docker CE Test - Sources 無効 !epel/x86_64 Extra Packages for Enterprise Linux 6 - x86_64 無効 epel-debuginfo/x86_64 Extra Packages for Enterprise Linux 6 - x86_64 - Debug 無効 epel-source/x86_64 Extra Packages for Enterprise Linux 6 - x86_64 - Source 無効 epel-testing/x86_64 Extra Packages for Enterprise Linux 6 - Testing - x86_64 無効 epel-testing-debuginfo/x86_64 Extra Packages for Enterprise Linux 6 - Testing - x86_64 - Debug 無効 epel-testing-source/x86_64 Extra Packages for Enterprise Linux 6 - Testing - x86_64 - Source 無効 nodesource/x86_64 Node.js Packages for Enterprise Linux 7 - x86_64 無効 nodesource-source Node.js for Enterprise Linux 7 - x86_64 - Source 無効 ``` 2. リポジトリアップデート `$ sudo yum update -y` 3. httpd.conf退避 `$ sudo cp /etc/httpd/conf/httpd.conf /home/ec2-user` 4. インストール済みのphp、httpdパッケージを確認 ``` $ sudo yum list installed | grep php php71.x86_64 7.1.33-1.43.amzn1 @amzn-updates php71-cli.x86_64 7.1.33-1.43.amzn1 @amzn-updates php71-common.x86_64 7.1.33-1.43.amzn1 @amzn-updates php71-devel.x86_64 7.1.33-1.43.amzn1 @amzn-updates php71-gd.x86_64 7.1.33-1.43.amzn1 @amzn-updates php71-json.x86_64 7.1.33-1.43.amzn1 @amzn-updates php71-mbstring.x86_64 7.1.33-1.43.amzn1 @amzn-updates php71-mysqlnd.x86_64 7.1.33-1.43.amzn1 @amzn-updates php71-pdo.x86_64 7.1.33-1.43.amzn1 @amzn-updates php71-process.x86_64 7.1.33-1.43.amzn1 @amzn-updates php71-xml.x86_64 7.1.33-1.43.amzn1 @amzn-updates ``` ``` $ sudo yum list installed | grep httpd httpd24.x86_64 2.4.41-1.88.amzn1 @amzn-updates httpd24-tools.x86_64 2.4.41-1.88.amzn1 @amzn-updates ``` 5. phpパッケージ(7.1系)を削除 `$ sudo yum remove php71* -y` 6. httpdパッケージを削除 `$ sudo yum remove httpd24* -y` 7. php7.3系のパッケージをインストール `$ sudo yum install php73.x86_64 php73-cli.x86_64 php73-common.x86_64 php73-devel.x86_64 php73-json.x86_64 php73-mbstring.x86_64 php73-mysqlnd.x86_64 php73-process.x86_64 php73-xml.x86_64 php73-pdo.x86_64 -y` 8. 確認 ``` $ sudo yum list installed | grep php php73.x86_64 7.3.11-1.21.amzn1 @amzn-updates php73-cli.x86_64 7.3.11-1.21.amzn1 @amzn-updates php73-common.x86_64 7.3.11-1.21.amzn1 @amzn-updates php73-json.x86_64 7.3.11-1.21.amzn1 @amzn-updates php73-mbstring.x86_64 7.3.11-1.21.amzn1 @amzn-updates php73-mysqlnd.x86_64 7.3.11-1.21.amzn1 @amzn-updates php73-pdo.x86_64 7.3.11-1.21.amzn1 @amzn-updates php73-process.x86_64 7.3.11-1.21.amzn1 @amzn-updates php73-xml.x86_64 7.3.11-1.21.amzn1 @amzn-updates ``` ``` $ sudo yum list installed | grep httpd httpd24.x86_64 2.4.41-1.88.amzn1 @amzn-updates httpd24-tools.x86_64 2.4.41-1.88.amzn1 @amzn-updates ``` ``` $ php -v PHP 7.3.11 (cli) (built: Oct 31 2019 18:30:52) ( NTS ) Copyright (c) 1997-2018 The PHP Group Zend Engine v3.3.11, Copyright (c) 1998-2018 Zend Technologies ``` 9. apache設定ファイル復元と再起動 `$ sudo cp /home/ec2-user/httpd.conf /etc/httpd/conf/httpd.conf` `$ sudo service httpd restart` 参考 httpd.conf ``` # # This is the main Apache HTTP server configuration file. It contains the # configuration directives that give the server its instructions. # See <URL:http://httpd.apache.org/docs/2.4/> for detailed information. # In particular, see # <URL:http://httpd.apache.org/docs/2.4/mod/directives.html> # for a discussion of each configuration directive. # # Do NOT simply read the instructions in here without understanding # what they do. They're here only as hints or reminders. If you are unsure # consult the online docs. You have been warned. # # Configuration and logfile names: If the filenames you specify for many # of the server's control files begin with "/" (or "drive:/" for Win32), the # server will use that explicit path. If the filenames do *not* begin # with "/", the value of ServerRoot is prepended -- so 'log/access_log' # with ServerRoot set to '/www' will be interpreted by the # server as '/www/log/access_log', where as '/log/access_log' will be # interpreted as '/log/access_log'. # # ServerRoot: The top of the directory tree under which the server's # configuration, error, and log files are kept. # # Do not add a slash at the end of the directory path. If you point # ServerRoot at a non-local disk, be sure to specify a local disk on the # Mutex directive, if file-based mutexes are used. If you wish to share the # same ServerRoot for multiple httpd daemons, you will need to change at # least PidFile. # ServerRoot "/etc/httpd" # # Listen: Allows you to bind Apache to specific IP addresses and/or # ports, instead of the default. See also the <VirtualHost> # directive. # # Change this to Listen on specific IP addresses as shown below to # prevent Apache from glomming onto all bound IP addresses. # #Listen 12.34.56.78:80 Listen 80 #<VirtualHost *:80> #RewriteEngine On #RewriteCond %{HTTP:X-Forwarded-Proto} =http #RewriteRule .* https://%{HTTP:Host}%{REQUEST_URI} [L,R=permanent] #</VirtualHost> #NameVirtualHost *:80 #<VirtualHost *:80> # ServerName any # <Location /> # Order Deny,Allow # Deny from all # # Require all granted # </Location> #</VirtualHost> #<VirtualHost *:80> # ServerName cenq-staging.work # DocumentRoot /var/www/cenq/public #</VirtualHost> #<VirtualHost *:80> # ServerName any # <Location /> # Order deny,allow # Deny from all # </Location> #</VirtualHost> # # Dynamic Shared Object (DSO) Support # # To be able to use the functionality of a module which was built as a DSO you # have to place corresponding `LoadModule' lines at this location so the # directives contained in it are actually available _before_ they are used. # Statically compiled modules (those listed by `httpd -l') do not need # to be loaded here. # # Example: # LoadModule foo_module modules/mod_foo.so # Include conf.modules.d/*.conf # # If you wish httpd to run as a different user or group, you must run # httpd as root initially and it will switch. # # User/Group: The name (or #number) of the user/group to run httpd as. # It is usually good practice to create a dedicated user and group for # running httpd, as with most system services. # User apache Group apache # 'Main' server configuration # # The directives in this section set up the values used by the 'main' # server, which responds to any requests that aren't handled by a # <VirtualHost> definition. These values also provide defaults for # any <VirtualHost> containers you may define later in the file. # # All of these directives may appear inside <VirtualHost> containers, # in which case these default settings will be overridden for the # virtual host being defined. # # # ServerAdmin: Your address, where problems with the server should be # e-mailed. This address appears on some server-generated pages, such # as error documents. e.g. admin@your-domain.com # ServerAdmin root@localhost # # ServerName gives the name and port that the server uses to identify itself. # This can often be determined automatically, but we recommend you specify # it explicitly to prevent problems during startup. # # If your host doesn't have a registered DNS name, enter its IP address here. # #ServerName www.example.com:80 # # Deny access to the entirety of your server's filesystem. You must # explicitly permit access to web content directories in other # <Directory> blocks below. # <Directory /> AllowOverride none Require all denied </Directory> # # Note that from this point forward you must specifically allow # particular features to be enabled - so if something's not working as # you might expect, make sure that you have specifically enabled it # below. # # # DocumentRoot: The directory out of which you will serve your # documents. By default, all requests are taken from this directory, but # symbolic links and aliases may be used to point to other locations. # DocumentRoot "/var/www/cenq/public" #DocumentRoot "/var/www/html" # # Relax access to content within /var/www. # #<Directory "/var/www"> # AllowOverride None # # Allow open access: # Require all granted #</Directory> # Further relax access to the default document root: <Directory "/var/www/cenq/public"> #<Directory "/var/www/html"> # # Possible values for the Options directive are "None", "All", # or any combination of: # Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews # # Note that "MultiViews" must be named *explicitly* --- "Options All" # doesn't give it to you. # # The Options directive is both complicated and important. Please see # http://httpd.apache.org/docs/2.4/mod/core.html#options # for more information. # Options Indexes FollowSymLinks # # AllowOverride controls what directives may be placed in .htaccess files. # It can be "All", "None", or any combination of the keywords: # Options FileInfo AuthConfig Limit # AllowOverride All # # Controls who can get stuff from this server. # Require all granted </Directory> # # DirectoryIndex: sets the file that Apache will serve if a directory # is requested. # <IfModule dir_module> DirectoryIndex index.php </IfModule> # # The following lines prevent .htaccess and .htpasswd files from being # viewed by Web clients. # <Files ".ht*"> Require all denied </Files> # # ErrorLog: The location of the error log file. # If you do not specify an ErrorLog directive within a <VirtualHost> # container, error messages relating to that virtual host will be # logged here. If you *do* define an error logfile for a <VirtualHost> # container, that host's errors will be logged there and not here. # ErrorLog "logs/error_log" # # LogLevel: Control the number of messages logged to the error_log. # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. # LogLevel warn <IfModule log_config_module> # # The following directives define some format nicknames for use with # a CustomLog directive (see below). # LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined LogFormat "%h %l %u %t \"%r\" %>s %b" common <IfModule logio_module> # You need to enable mod_logio.c to use %I and %O LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio </IfModule> # # The location and format of the access logfile (Common Logfile Format). # If you do not define any access logfiles within a <VirtualHost> # container, they will be logged here. Contrariwise, if you *do* # define per-<VirtualHost> access logfiles, transactions will be # logged therein and *not* in this file. # #CustomLog "logs/access_log" common # # If you prefer a logfile with access, agent, and referer information # (Combined Logfile Format) you can use the following directive. # CustomLog "logs/access_log" combined </IfModule> <IfModule alias_module> # # Redirect: Allows you to tell clients about documents that used to # exist in your server's namespace, but do not anymore. The client # will make a new request for the document at its new location. # Example: # Redirect permanent /foo http://www.example.com/bar # # Alias: Maps web paths into filesystem paths and is used to # access content that does not live under the DocumentRoot. # Example: # Alias /webpath /full/filesystem/path # # If you include a trailing / on /webpath then the server will # require it to be present in the URL. You will also likely # need to provide a <Directory> section to allow access to # the filesystem path. # # ScriptAlias: This controls which directories contain server scripts. # ScriptAliases are essentially the same as Aliases, except that # documents in the target directory are treated as applications and # run by the server when requested rather than as documents sent to the # client. The same rules about trailing "/" apply to ScriptAlias # directives as to Alias. # ScriptAlias /cgi-bin/ "/var/www/cgi-bin/" </IfModule> # # "/var/www/cgi-bin" should be changed to whatever your ScriptAliased # CGI directory exists, if you have that configured. # <Directory "/var/www/cgi-bin"> AllowOverride None Options None Require all granted </Directory> <IfModule mime_module> # # TypesConfig points to the file containing the list of mappings from # filename extension to MIME-type. # TypesConfig /etc/mime.types # # AddType allows you to add to or override the MIME configuration # file specified in TypesConfig for specific file types. # #AddType application/x-gzip .tgz # # AddEncoding allows you to have certain browsers uncompress # information on the fly. Note: Not all browsers support this. # #AddEncoding x-compress .Z #AddEncoding x-gzip .gz .tgz # # If the AddEncoding directives above are commented-out, then you # probably should define those extensions to indicate media types: # AddType application/x-compress .Z AddType application/x-gzip .gz .tgz # # AddHandler allows you to map certain file extensions to "handlers": # actions unrelated to filetype. These can be either built into the server # or added with the Action directive (see below) # # To use CGI scripts outside of ScriptAliased directories: # (You will also need to add "ExecCGI" to the "Options" directive.) # #AddHandler cgi-script .cgi # For type maps (negotiated resources): #AddHandler type-map var # # Filters allow you to process content before it is sent to the client. # # To parse .shtml files for server-side includes (SSI): # (You will also need to add "Includes" to the "Options" directive.) # AddType text/html .shtml AddOutputFilter INCLUDES .shtml </IfModule> # # Specify a default charset for all content served; this enables # interpretation of all content as UTF-8 by default. To use the # default browser choice (ISO-8859-1), or to allow the META tags # in HTML content to override this choice, comment out this # directive: # AddDefaultCharset UTF-8 <IfModule mime_magic_module> # # The mod_mime_magic module allows the server to use various hints from the # contents of the file itself to determine its type. The MIMEMagicFile # directive tells the module where the hint definitions are located. # MIMEMagicFile conf/magic </IfModule> # # Customizable error responses come in three flavors: # 1) plain text 2) local redirects 3) external redirects # # Some examples: #ErrorDocument 500 "The server made a boo boo." #ErrorDocument 404 /missing.html #ErrorDocument 404 "/cgi-bin/missing_handler.pl" #ErrorDocument 402 http://www.example.com/subscription_info.html # # # EnableMMAP and EnableSendfile: On systems that support it, # memory-mapping or the sendfile syscall may be used to deliver # files. This usually improves server performance, but must # be turned off when serving from networked-mounted # filesystems or if support for these functions is otherwise # broken on your system. # Defaults if commented: EnableMMAP On, EnableSendfile Off # #EnableMMAP off EnableSendfile on # Supplemental configuration # # Load config files in the "/etc/httpd/conf.d" directory, if any. IncludeOptional conf.d/*.conf ``` 10. mysqld再起動 `$ sudo service mysqld restart` 11. 確認 ブラウザで動作を確認する。 ## Laravel upgrade 1. 最新ソースを取得 `$ git fetch ~` `$ git checkout ~` 2. composer update `$ composer update` ※ メモリが足りない旨のエラーが出た場合はスワップを作成してからcomposer update ``` $ sudo /bin/dd if=/dev/zero of=/var/swap.1 bs=1M count=1024 $ sudo /sbin/mkswap /var/swap.1 $ sudo /sbin/swapon /var/swap.1 $ composer update ``` 3. cacheクリア ``` $ composer dump-autoload $ php artisan config:cache $ php artisan view:clear $ php artisan cache:clear ``` 4. 確認 ブラウザでアクセスし動作を確認する。