SYST Reset log

Notas:

Issue:

El kit entra en un bluce de reset (parece por mala alimentación).

  • Pasa con el kit con todo conectado en el nuevo prot de la SCK2.2:
    • SEN50, SD, URBAN, BATT
    • Conectado a mi ordenador a través del hub USB
    • Aparece como SYST reset. No debería ser POR o BOD?
      • Adicionalmente, cuando desconectas y conectas el cable manualmente, detecta rcause como SYST en lugar de POR. En una 2.1 con el mismo firmware no pasa (why???)

Diagnóstico:

Parece un problema con el cable / fuente de alimentación? Sin embargo:

  • No consigo reproducirlo cuando está en mismas condiciones conectado directamente al puerto USB de mi ordenador (sin HUB)
    • Incluso probando con todo (SFA30 + SCD30 + ADS + PM) no parece reproducirse. Tampoco con un cargador
    • No consigo reproducirlo con otro kit 2.1, con el mismo cable

Conclusión
> Descarto que sea algo grave, simplemente asegurar que da suficiente el cargador + cable..

Sin embargo, el rcause a mi parecer es incorrecto.

KIT's Shell

-----------
2023-12-20T12:08:31Z
Temperature: 22.06 C
Humidity: 39.70 %
Battery: 94 %
SD card: 1 Present
Light: 157 lux
Noise dBA: 49.09 dBA
LPS33 Barometric pressure: 101.96 kPa
AS7331 UVA: 1.60 uW/cm2
AS7331 UVB: 0.10 uW/cm2
AS7331 UVC: 0.10 uW/cm2
-----------
(2023-12-20T12:08:31Z) Readings saved to flash memory.
(2023-12-20T12:08:31Z) 10 readings saved to sdcard.
Recent user interaction, it's time to publish
Connecting to Wifi...
ESP finished booting
ESP on
Synced config with ESP!!
Connecting to Wifi...
Connected to wifi!!- RSSI: -63
(2023-12-20T12:08:31Z) Sent readings to platform.
{t:2023-12-20T12:08:31Z,10:94,221:1,14:157,55:22.06,56:39.70,53:49.09,227:101.96,214:1.60,215:0.10,216:0.10}
Network publish OK!! (10 readings)
ESP off...

-----------
2023-12-20T12:09:31Z
Temperature: 22.06 C
Humidity: 38.42 %
Battery: 93 %
SD card: 1 Present
WiFi RSSI: -63 dBm
Light: 163 lux
Noise dBA: 52.35 dBA
LPS33 Barometric pressure: 101.96 kPa
AS7331 UVA: 1.60 uW/cm2
AS7331 UVB: 0.10 uW/cm2
AS7331 UVC: 0.10 uW/cm2
-----------
(2023-12-20T12:09:31Z) Readings saved to flash memory.
(2023-12-20T12:09:31Z) 11 readings saved to sdcard.
Recent user interaction, it's time to publish
Connecting to Wifi...
ESP finished booting
ESP on
Synced config with ESP!!
Connecting to Wifi...

[13:09:42.730] Disconnected
[13:09:43.731] Warning: Could not open tty device (No such file or directory)
[13:09:43.731] Waiting for tty device..
[13:09:44.733] Connected
Setting up SDcard interrupt
Sdcard inserted
Card size: 15938 MB
Volume is FAT 32, Cluster size (bytes): 32768
Sd card ready to use
Saved INFO.TXT file!!
Turning on WiFi...
ESP finished booting
Saved INFO.TXT file!!
ESP on
Connecting to Wifi...
Synced config with ESP!!
Connected to wifi!!- RSSI: -65
Asked new time sync to ESP...
ERROR sending msg to ESP
RTC updated: 2023-12-20T12:09:52Z
RTC updated: 2023-12-20T12:09:52Z
Info publish OK!!

-----------
2023-12-20T12:09:53Z
Temperature: 22.04 C
Humidity: 38.42 %
Battery: 90 %
SD card: 1 Present
WiFi RSSI: -65 dBm
Light: 162 lux
Noise dBA: 52.89 dBA
LPS33 Barometric pressure: 101.96 kPa
Adding SEN5X PM 1.0 to pending sensor list
Adding SEN5X PM 2.5 to pending sensor list
Adding SEN5X PM 4.0 to pending sensor list
Adding SEN5X PM 10.0 to pending sensor list
Adding SEN5X PN 0.5 to pending sensor list
Adding SEN5X PN 1.0 to pending sensor list
Adding SEN5X PN 2.5 to pending sensor list
Adding SEN5X PN 4.0 to pending sensor list
Adding SEN5X PN 10.0 to pending sensor list
Adding SEN5X Typical Particle Size to pending sensor list
AS7331 UVA: 1.68 uW/cm2
AS7331 UVB: 0.10 uW/cm2
AS7331 UVC: 0.10 uW/cm2
Waiting for 10 sensors to finish the reading process

[13:10:01.411] Disconnected
[13:10:02.413] Warning: Could not open tty device (No such file or directory)
[13:10:02.413] Waiting for tty device..
[13:10:03.415] Connected
Setting up SDcard interrupt
Sdcard inserted
Card size: 15938 MB
Volume is FAT 32, Cluster size (bytes): 32768
Sd card ready to use
Saved INFO.TXT file!!
Turning on WiFi...
ESP finished booting
Saved INFO.TXT file!!
ESP on
Connecting to Wifi...

[13:10:07.311] Disconnected
[13:10:08.313] Warning: Could not open tty device (No such file or directory)
[13:10:08.313] Waiting for tty device..
[13:10:09.315] Connected
Setting up SDcard interrupt
Sdcard inserted
Card size: 15938 MB
Volume is FAT 32, Cluster size (bytes): 32768
Sd card ready to use
Saved INFO.TXT file!!
Turning on WiFi...
ESP finished booting
Saved INFO.TXT file!!
ESP on
Connecting to Wifi...
free
ERROR sending msg to ESP

[13:10:19.581] Disconnected
[13:10:20.582] Warning: Could not open tty device (No such file or directory)
[13:10:20.583] Waiting for tty device..
[13:10:21.585] Connected
Setting up SDcard interrupt
Sdcard inserted
Card size: 15938 MB
Volume is FAT 32, Cluster size (bytes): 32768
Sd card ready to use
Saved INFO.TXT file!!
Turning on WiFi...
ESP finished booting
Saved INFO.TXT file!!
ESP on
Connecting to Wifi...

[13:10:25.730] Disconnected
[13:10:26.731] Warning: Could not open tty device (No such file or directory)
[13:10:26.731] Waiting for tty device..
[13:10:30.737] Connected
Setting up SDcard interrupt
Sdcard inserted
Card size: 15938 MB
Volume is FAT 32, Cluster size (bytes): 32768
Sd card ready to use
Saved INFO.TXT file!!
Turning on WiFi...
ESP finished booting
Saved INFO.TXT file!!
ESP on
Connecting to Wifi...
Synced config with ESP!!
Connected to wifi!!- RSSI: -63
Asked new time sync to ESP...
ERROR sending msg to ESP
RTC updated: 2023-12-20T12:10:37Z
RTC updated: 2023-12-20T12:10:37Z
Info publish OK!!

-----------
2023-12-20T12:10:37Z
Temperature: 22.13 C
Humidity: 38.75 %
Battery: 100 %
SD card: 1 Present
WiFi RSSI: -62 dBm
Light: 123 lux
Noise dBA: 56.24 dBA
LPS33 Barometric pressure: 101.96 kPa
Adding SEN5X PM 1.0 to pending sensor list
Adding SEN5X PM 2.5 to pending sensor list
Adding SEN5X PM 4.0 to pending sensor list
Adding SEN5X PM 10.0 to pending sensor list
Adding SEN5X PN 0.5 to pending sensor list
Adding SEN5X PN 1.0 to pending sensor list
Adding SEN5X PN 2.5 to pending sensor list
Adding SEN5X PN 4.0 to pending sensor list
Adding SEN5X PN 10.0 to pending sensor list
Adding SEN5X Typical Particle Size to pending sensor list
AS7331 UVA: 1.37 uW/cm2
AS7331 UVB: 0.10 uW/cm2
AS7331 UVC: 0.05 uW/cm2
Waiting for 10 sensors to finish the reading process
SEN5X Typical Particle Size: 58.80 um
SEN5X PM 1.0: 10.40 ug/m3
SEN5X PM 4.0: 14.30 ug/m3
SEN5X PN 0.5: 6570.00 #/0.1l
SEN5X PN 2.5: 8180.00 #/0.1l
SEN5X PN 10.0: 8220.00 #/0.1l
SEN5X PM 2.5: 12.80 ug/m3
SEN5X PN 1.0: 7960.00 #/0.1l
SEN5X PM 10.0: 15.00 ug/m3
SEN5X PN 4.0: 8210.00 #/0.1l
-----------
(2023-12-20T12:10:37Z) Readings saved to flash memory.
(2023-12-20T12:10:37Z) 21 readings saved to sdcard.
it's time to publish
Recent user interaction, it's time to publish
(2023-12-20T12:09:31Z) Sent readings to platform.
{t:2023-12-20T12:09:31Z,10:93,221:1,220:-63,14:163,55:22.06,56:38.42,53:52.35,227:101.96,214:1.60,215:0.10,216:0.10}
Network publish OK!! (11 readings)
(2023-12-20T12:10:37Z) Sent readings to platform.
{t:2023-12-20T12:10:37Z,10:100,221:1,220:-62,14:123,55:22.13,56:38.75,53:56.24,227:101.96,193:10.40,194:12.80,195:14.30,196:15.00,197:6570.00,198:7960.00,199:8180.00,200:8210.00,201:8220.00,202:58.80,214:1.37,215:0.10,216:0.05}
it's time to publish
Recent user interaction, it's time to publish
Network publish OK!! (21 readings)
ESP off...

MQTT Messages

device/sck/f3e09b/info {"time":"2023-12-20T12:09:52Z","hw_ver":"2.1","id":"1FF75ACD50305833412E3120FF12352E","sam_ver":"0.9.8-12794af-dev","sam_bd":"2023-12-20T12:22:37Z","mac":"BE:FF:4D:18:6C:74","esp_ver":"0.9.8-12794af-dev","esp_bd":"2023-12-20T12:22:42Z","rcause":"SYST"}
device/sck/f3e09b/info {"time":"2023-12-20T12:10:15Z","hw_ver":"2.1","id":"1FF75ACD50305833412E3120FF12352E","sam_ver":"0.9.8-12794af-dev","sam_bd":"2023-12-20T12:22:37Z","mac":"BE:FF:4D:18:6C:74","esp_ver":"0.9.8-12794af-dev","esp_bd":"2023-12-20T12:22:42Z","rcause":"SYST"}
device/sck/f3e09b/info {"time":"2023-12-20T12:10:37Z","hw_ver":"2.1","id":"1FF75ACD50305833412E3120FF12352E","sam_ver":"0.9.8-12794af-dev","sam_bd":"2023-12-20T12:22:37Z","mac":"BE:FF:4D:18:6C:74","esp_ver":"0.9.8-12794af-dev","esp_bd":"2023-12-20T12:22:42Z","rcause":"SYST"}
device/sck/f3e09b/readings/raw {t:2023-12-20T12:09:31Z,10:93,221:1,220:-63,14:163,55:22.06,56:38.42,53:52.35,227:101.96,214:1.60,215:0.10,216:0.10}
device/sck/f3e09b/readings/raw {t:2023-12-20T12:10:37Z,10:100,221:1,220:-62,14:123,55:22.13,56:38.75,53:56.24,227:101.96,193:10.40,194:12.80,195:14.30,196:15.00,197:6570.00,198:7960.00,199:8180.00,200:8210.00,201:8220.00,202:58.80,214:1.37,215:0.10,216:0.05}
device/sck/f3e09b/readings/raw {t:2023-12-20T12:12:37Z,10:99,221:1,14:158,55:22.28,56:38.13,53:41.48,227:101.96,214:1.45,215:0.10,216:0.10}
device/sck/f3e09b/hello f3e09b:Hello
device/sck/f3e09b/info {"time":"2023-12-20T12:13:54Z","hw_ver":"2.1","id":"1FF75ACD50305833412E3120FF12352E","sam_ver":"0.9.8-12794af-dev","sam_bd":"2023-12-20T12:22:37Z","mac":"BE:FF:4D:18:6C:74","esp_ver":"0.9.8-12794af-dev","esp_bd":"2023-12-20T12:22:42Z","rcause":"SYST"}
device/sck/f3e09b/readings/raw {t:2023-12-20T12:14:55Z,10:-1,221:1,14:159,55:22.26,56:39.18,53:39.84,227:101.96,214:1.52,215:0.10,216:0.10}
device/sck/f3e09b/readings/raw {t:2023-12-20T12:15:55Z,10:-1,221:1,14:156,55:22.21,56:38.58,53:60.99,227:101.96,193:10.00,194:13.70,195:16.30,196:17.60,197:5990.00,198:7500.00,199:7850.00,200:7910.00,201:7920.00,202:65.10,214:1.52,215:0.10,216:0.10}
device/sck/f3e09b/readings/raw {t:2023-12-20T12:16:55Z,10:-1,221:1,220:-70,14:165,55:22.20,56:38.67,53:50.66,227:101.95,214:1.52,215:0.10,216:0.10}
device/sck/f3e09b/readings/raw {t:2023-12-20T12:17:55Z,10:-1,221:1,14:163,55:22.10,56:38.46,53:42.96,227:101.94,214:1.52,215:0.10,216:0.10}