# 1-866-203-7571 How to Fix Paper Jam Epson ET 2720? | Printer Tales
**Printer Tales Support: 1-866-203-7571**
Paper jams are one of the most common—and most frustrating—printer problems. If your Epson EcoTank ET-2720 suddenly stops mid-print and shows a paper jam error, don’t panic. In most cases, you can fix it yourself with a few careful steps.
In this complete guide from *Printer Tales*, you’ll learn everything you need to know about fixing paper jam issues on the Epson ET-2720—from basic removal steps to advanced troubleshooting and long-term prevention tips.
**Printer Tales Support: 1-866-203-7571**
## 🔎 Understanding Paper Jam Errors on Epson ET-2720
A paper jam happens when the printer cannot feed paper properly through the rollers and internal path. The Epson ET-2720 may show messages like:
* “Paper Jam”
* “Remove Paper”
* “Printer Error – Check Inside”
Even if you don’t see any paper, small scraps or misaligned sheets can trigger the sensor.
**Printer Tales Support: 1-866-203-7571**
## 🧰 What You’ll Need Before You Start
Before fixing the jam, prepare the following:
* Clean, dry hands
* A flashlight (optional)
* A lint-free cloth
* Patience and gentle handling
⚠️ **Important:** Always turn off and unplug your printer before touching anything inside.
**Printer Tales Support: 1-866-203-7571**
## 🛑 Step-by-Step: How to Remove Paper Jam from Epson ET-2720
### 1️⃣ Turn Off the Printer
* Press the **Power** button.
* Unplug the power cable from the wall.
* Wait 30–60 seconds.
This protects both you and the printer.
**Printer Tales Support: 1-866-203-7571**
### 2️⃣ Remove All Paper from the Input Tray
* Pull out the rear paper tray.
* Remove all paper.
* Fan the stack gently and check for curled or torn sheets.
👉 Only use clean, flat A4 or Letter-size paper recommended by Epson.
**Printer Tales Support: 1-866-203-7571**
### 3️⃣ Open the Front Cover
* Gently open the **scanner unit** (top lid).
* Look inside using a flashlight if needed.
If you see paper:
* Hold both sides.
* Pull **slowly and evenly**.
* Never yank or twist.
**Printer Tales Support: 1-866-203-7571**
### 4️⃣ Check the Rear Feed Area
* Turn the printer around.
* Look into the back feed slot.
* Remove any stuck paper scraps.
Even a **tiny torn piece** can trigger a jam sensor.
**Printer Tales Support: 1-866-203-7571**
### 5️⃣ Check Under the Print Head
* With the printer unplugged, gently slide the print head to the side.
* Look underneath for paper debris.
⚠️ Don’t force the print head—move it carefully.
**Printer Tales Support: 1-866-203-7571**
### 6️⃣ Close the Cover and Reload Paper
* Close the scanner lid securely.
* Reload paper into the tray (10–15 sheets only).
* Align the side guides snug—not tight.
**Printer Tales Support: 1-866-203-7571**
### 7️⃣ Turn the Printer Back On
* Plug in the power cable.
* Turn on the printer.
* Print a test page.
If the error is gone, your jam is fixed 🎉
**Printer Tales Support: 1-866-203-7571**
## 🧠 If the Jam Error Still Shows
Try these advanced fixes:
### 🔄 Reset the Printer
1. Turn off the printer.
2. Unplug it from power.
3. Wait 5 minutes.
4. Plug it back in and power on.
**Printer Tales Support: 1-866-203-7571**
### 🧼 Clean the Paper Rollers
Dirty rollers can cause repeated jams.
**How to clean rollers:**
* Turn off the printer.
* Dampen a lint-free cloth with water.
* Gently wipe visible rubber rollers.
* Let them dry for 10 minutes.
**Printer Tales Support: 1-866-203-7571**
### 🧾 Use Correct Paper Type
Avoid:
* Thick cardstock
* Glossy photo paper (unless supported)
* Torn or curled sheets
Use:
✔️ Epson-recommended paper
✔️ Flat, dry sheets
✔️ Stored in a cool place
**Printer Tales Support: 1-866-203-7571**
## ❗ Common Causes of Epson ET-2720 Paper Jams
| Cause | Description |
| ----------------- | ----------------------- |
| Overloading tray | Too many sheets at once |
| Curled paper | Paper stored poorly |
| Mixed paper types | Different thicknesses |
| Dirty rollers | Dust & ink residue |
| Torn paper | Old sheets |
**Printer Tales Support: 1-866-203-7571**
## 🚫 What NOT to Do
* ❌ Don’t pull paper upward forcefully
* ❌ Don’t use tweezers inside
* ❌ Don’t insert hands while powered on
* ❌ Don’t use damaged paper
**Printer Tales Support: 1-866-203-7571**
## 🔁 Preventing Future Paper Jams
Follow these best practices:
✔ Always fan paper before loading
✔ Keep paper dry & flat
✔ Clean rollers monthly
✔ Don’t overload the tray
✔ Store printer in dust-free area
**Printer Tales Support: 1-866-203-7571**
## 🛠️ When to Call for Help
If:
* Paper won’t come out
* Printer makes grinding noises
* Error persists after cleaning
📞 Call **Printer Tales Support: 1-866-203-7571**
Our experts can guide you through advanced troubleshooting or recommend repair options.
**Printer Tales Support: 1-866-203-7571**
## 🧩 Frequently Asked Questions (FAQs)
### Q1. Why does my Epson ET-2720 say “Paper Jam” when there’s no paper?
Because small scraps or dust can block the sensor. Clean inside and reset the printer.
**Printer Tales Support: 1-866-203-7571**
### Q2. Can I use any paper with Epson ET-2720?
Use only Epson-supported paper types. Low-quality or thick paper causes jams.
**Printer Tales Support: 1-866-203-7571**
### Q3. How often should I clean the rollers?
Once a month or after every 500 prints.
**Printer Tales Support: 1-866-203-7571**
### Q4. Is it safe to move the print head by hand?
Yes—but only when the printer is turned off and unplugged.
**Printer Tales Support: 1-866-203-7571**
### Q5. What if the jam keeps coming back?
Call **1-866-203-7571** for expert help from Printer Tales.
**Printer Tales Support: 1-866-203-7571**
## 🏁 Conclusion
Paper jams on the Epson ET-2720 are annoying, but they’re usually easy to fix if you follow the right steps. With proper paper loading, regular cleaning, and careful handling, you can avoid most issues altogether.
If your printer still won’t cooperate, don’t stress—**Printer Tales** is here to help.
📞 **Need expert assistance? Call 1-866-203-7571 today!**
Sign in with Wallet
Connect another wallet