# 1-866-203-7571 How to Fix Brother Printer Won’t Turn On Issue (5 Easy Methods)?
**Brother Printer Support: 1-866-203-7571**
A Brother printer that won’t turn on can be frustrating—especially when you have important documents waiting to be printed. Whether your printer shows no lights, makes no sound, or suddenly stopped working after a power outage, the good news is that in most cases the problem can be fixed at home with a few simple checks.
In this complete guide, we’ll walk you through **5 easy and effective methods** to troubleshoot and fix a Brother printer that won’t power on. By the end, you’ll know exactly what to do before calling for professional help at **1-866-203-7571**.
**Brother Printer Support: 1-866-203-7571**
## Why Your Brother Printer Won’t Turn On
Before jumping into fixes, it helps to understand what might be causing the issue. Common reasons include:
* Faulty power cable or adapter
* Dead or damaged power outlet
* Internal power supply failure
* Stuck firmware or electrical surge damage
* Hardware issues on the control panel or mainboard
Sometimes the issue is as simple as a loose cord. Other times, it’s related to internal electronics. Let’s start with the easiest and most common solutions first.
**Brother Printer Support: 1-866-203-7571**
## Method 1: Check the Power Source and Cables
This may sound obvious, but a large number of “won’t turn on” problems are caused by power connection issues.
### Step 1: Inspect the Power Cable
* Make sure the power cord is **firmly connected** to both the printer and the wall outlet.
* Look for visible damage such as cuts, fraying, or bent prongs.
* If the cable looks worn or damaged, replace it with a compatible Brother power cable.
### Step 2: Test the Wall Outlet
* Plug another device (like a lamp or phone charger) into the same outlet.
* If that device doesn’t work, the outlet may be dead.
* Try a **different wall socket** in another room.
### Step 3: Avoid Power Strips Temporarily
* Plug the printer **directly into the wall**, not into a surge protector or extension board.
* Some power strips fail or don’t deliver consistent voltage.
### Step 4: Check the Power Button
* Press and hold the **Power button for 5–10 seconds**.
* Some Brother models require a firm press to wake up.
👉 If your printer powers on after these steps, great! If not, move to Method 2.
**Brother Printer Support: 1-866-203-7571**
## Method 2: Perform a Hard Power Reset
A hard reset can clear internal glitches caused by power surges, static electricity, or firmware freezes.
### Step 1: Turn Everything Off
* Unplug the printer from the wall outlet.
* Disconnect the power cable from the back of the printer.
### Step 2: Drain Residual Power
* Leave the printer unplugged for **at least 10–15 minutes**.
* This allows all stored electricity to discharge.
### Step 3: Reconnect and Power On
* Plug the power cable back into the printer first.
* Then plug it into the wall outlet.
* Press and hold the **Power button** for 5 seconds.
If the control panel lights up or you hear startup sounds, the reset worked.
👉 Still no power? Don’t worry—keep going.
**Brother Printer Support: 1-866-203-7571**
## Method 3: Check the Internal Power Supply
If your Brother printer still won’t turn on, the internal power supply could be the problem.
### Signs of a Power Supply Issue:
* No lights at all
* No sound when pressing the Power button
* Printer completely dead even with a known-working outlet
### What You Can Do:
* Try a **different power cable** if you have one that fits.
* Smell near the back of the printer—burnt electronics sometimes give off a noticeable odor.
* Check if the printer recently experienced a **power surge or lightning strike**.
⚠️ Important:
Do **not** open the printer unless you are trained in electronics. Brother printers contain high-voltage components.
👉 If you suspect a bad power supply, it’s best to call Brother support or a professional technician at **1-866-203-7571** for safe repair options.
**Brother Printer Support: 1-866-203-7571**
## Method 4: Inspect the Control Panel and Internal Connections
Sometimes the printer has power, but the control panel isn’t responding.
### Step 1: Look for Faint Signs of Life
* Are there any dim lights?
* Does the screen flicker briefly?
### Step 2: Gently Reseat External Panels
* Make sure the scanner lid and front cover are fully closed.
* On some Brother models, an open panel can prevent startup.
### Step 3: Check for Jammed Buttons
* Press each button gently to ensure none are stuck.
### Step 4: Disconnect Accessories
* Remove USB cables, network cables, and memory cards.
* Try powering on the printer **with nothing connected except the power cable**.
Sometimes a faulty USB or network connection can interfere with startup.
**Brother Printer Support: 1-866-203-7571**
## Method 5: Firmware or Motherboard Issues (When to Get Help)
If you’ve tried all the above methods and your Brother printer still won’t turn on, the issue may be:
* A corrupted firmware chip
* A failed motherboard
* A defective power module
At this stage, home troubleshooting ends and professional support is needed.
### What to Do Next:
* Note your **printer model number** (e.g., Brother HL-L2321D, MFC-L2710DW, DCP-T420W, etc.).
* Describe what happens when you press the Power button (lights, sounds, nothing at all).
* Contact expert printer technicians at **1-866-203-7571** for guided diagnostics and repair options.
They can help determine whether your printer needs:
* A power board replacement
* A control panel repair
* Or full internal servicing
**Brother Printer Support: 1-866-203-7571**
## Extra Tips to Prevent Power Issues in the Future
Once your printer is working again, follow these tips to avoid future power problems:
* Always use a **surge protector**
* Turn off the printer properly before unplugging
* Avoid plugging into unstable power sources
* Keep the printer in a dry, dust-free area
* Don’t move the printer while it’s powered on
**Brother Printer Support: 1-866-203-7571**
## Frequently Asked Questions (FAQs)
### Q1. Why is my Brother printer completely dead?
This usually means a power issue—either the cable, outlet, power supply, or internal board is faulty.
### Q2. Can a power surge damage my Brother printer?
Yes. Sudden voltage spikes can damage the power module or motherboard.
### Q3. Should I replace the printer if it won’t turn on?
Not always. Many power-related problems are repairable.
### Q4. How much does it cost to fix a Brother printer power issue?
Costs vary by model and problem. Call **1-866-203-7571** for an estimate.
### Q5. Is it safe to open my Brother printer myself?
No. Internal components carry high voltage. Always consult a professional.
**Brother Printer Support: 1-866-203-7571**
## Conclusion
A Brother printer that won’t turn on doesn’t always mean it’s broken forever. In many cases, the issue is caused by a simple power connection problem, a frozen internal circuit, or a faulty outlet. By following these **5 easy methods**, you can often bring your printer back to life without spending money.
If none of the fixes work, don’t stress. Professional help is just a call away at **📞 1-866-203-7571**.
**Brother Printer Support: 1-866-203-7571**
Sign in with Wallet
Connect another wallet