---
layout: default
title: Holey Calibration
nav_order: 7
parent: Calibration / Setup
grand_parent: Actions
WCVersion: 0.915
tags: webcontrol Actions-Calibration-Setup
---
# Holey Calibration

Release: >0.906
{: .label .label-blue }

If you are using holey calibration firmware, use 'Actions->Holey Calibration' to calibrate. If using stock firmware, go here:

[Triangular Calibration]({{ site.baseurl }}{% link Actions/Calibration-Setup/triangularCalibration.md %})

### Step 1: Cut Pattern

Press 'Cut Calibration Pattern' and wait for the sled to complete the cutting.


### Step 2: Measure

Make and record your measurements as requested. Double check and triple check them.. seriously.. do it.


### Step 3: Enter Measurements

Enter the measurements and double and triple check you entered them correctly and in the correct units. If so, press 'Calculate'


### Step 4: Accept Results

If all looks good, press 'Accept Results' (you may have to scroll down the screen to see it)|


### Step 5: Dance a Jig

You're calibrated! Note, calibration can be an iterative process and some have found improvements in their Maslow's accuracy by calibrating a second time. Make sure to recut the test pattern if you chose to calibrate again.