# GPS-to-Serial

[](https://github.com/XxOinvizioNxX/RX5808-ABFC/blob/main/LICENSE)
[](https://twitter.com/fern_hertz)

<div style="width:100%;text-align:center;">
<p align="center">
<img src="PHOTO_1.jpg" width=300 height="auto">
<img src="PHOTO_2.jpg" width=300 height="auto">
</p>
</div>

## What is it for?

This device was designed for adjusting and setting up frequency and band of the video receiver that comes from a FPV camera's transmitter.
It also shows the chosen frequency by flashing the LED numerous times according to the table provided below.

## Set up

In order to establish transmission between a receiver and a camera, you would have to adjust band by pressing the 'band' button and choose the frequency by pressing the 'ch' button exact times according to this table:

<div style="width:100%;text-align:center;">
<p align="center">
<img src="FREQUENCY_CHART.png" width="auto" height="auto">
</p>
</div>

E. g. for establishing connection on the 5771 MHz, press 'band' 2 times and and 'ch' 3 times.