Follow these steps to log into a LaView camera: • Make that the camera is connected to your local network, either by Wi-Fi or a standard Ethernet connection, depending on the kind. • Typically, a smartphone app is used to view and control the LaView camera remotely. The LaView app is available for download from the App Store. An alternative is to enter the camera's IP address into a web browser to access it. • Open the browser or app, and if you don't have an account, create one. You'll need to create a password and supply an email address for this. If you already have an account, simply enter your Laview camera login details. • After logging in, you must add the camera to your account. • You can either manually enter the camera's ID and password (which are usually found on the camera or in the handbook) or scan the QR code on the camera using the LaView mobile app. • When the camera is correctly connected, you may view the live stream and change camera settings including motion detection, recording schedules, and more. • Depending on the model, the internet portal will also allow for the configuration of complicated functionalities. If you're having problems signing in, make sure your login information is correct, the camera is turned on, and the network connection is stable. If the problems persist, you may need to upgrade the firmware on the camera. • Following these instructions should allow you to easily log in and control your LaView camera setup system. For more information on laview login, please visit our website.