# **🛑 FIXED: Konica Minolta "Driver Unavailable" or "Setup Incomplete" (2026)**

If your Konica Minolta bizhub or AccurioPrint series printer is displaying an "Attention Required" message or the Print Utility is stuck on "Searching for Printer," follow these steps:

**Quick Fix: The "Hard Reset"**

With the printer turned ON, pull the power cord from the back of the device.

Unplug the power cord from the wall outlet

**Wait 60 seconds.**

Plug it back into the wall outlet, then back into the printer. This clears the printer's

temporary logic memory.

**Resolve "Communication" Connection Loops**

If your computer says the printer is offline but the printer shows a solid network light:

Open your Control Panel > Printers & Scanners.

Remove the Konica Minolta printer device.

Click "Add a Printer" and manually enter the IP Address of the printer (Found under the Utility/Counter > Device Information menu).

**⚠️ KONICA MINOLTA CONNECTIVITY HELP** If you are seeing "Error Code: C-xxxx," "Controller Error," or if your software refuses to finish the setup, your printer may have a "Firmware Lock" that requires a manual override.

**Support Desk: [phone]**

Availability: 24/7 Technical Support

Status: Active / Toll-Free