# How To Reset Starlink Router Password

You can learn how to Reset Starlink Router Password from us. You might need to reset your Starlink router for a variety of reasons. Numerous issues, such as bad connections, sluggish internet speed, or general connection issues, are possible. No matter what the issue is, rebooting your router usually resolves it.

We'll walk you through the process of resetting your Starlink router in this article. You can reset your Starlink router to its factory default settings or to fix connectivity or technical problems.

You should be aware that when you reset your router, everything you've changed—including your network name and password—will be gone.

But don't worry, we'll show you how to reset your router and then configure it again. Let's start now!

You can reset your router to factory settings whenever you experience issues with installation or use. You must wait until the reboot is finished before reconnecting. You'll then need to create a new network ID and password.

Here's how fast and easily you can factory reset your Starlink router.

**Why Do You Need to Factory Reset Starlink Router?**

If your router is having problems, the best alternative, in addition to restarting it, is to perform a reset Starlink Router Password. Additionally, factory resetting a router will assist you in restoring the device's ideal settings and in resolving persistent problems like poor internet or disconnected connections.

If you recently relocated or left your home, it is also advised that you complete a factory reset. You can reset your router whenever you like, but keep in mind that doing so will delete all remembered devices, WiFi names, and passwords. You may also need to enter into the Starlink app again.

**Circular Starlink**

* Press and then let go of the bottom button on the router.
* Release it once the light turns blue.
* I'm done now! You've effectively reactivated the circle.

**Rectangular Starlink**

* By disconnecting the Starlink router from power and then plugging it back in, you can do a power cycle on it.
* Three times must pass after the previous step.
* The router will reboot, and you will need to wait for a time.
* The light on the router's bottom will turn on once the reset is complete.

**Starlink Mesh Router**

* Unplugging and rejoining is required to power cycle the mesh. This needs to be said three times.
* When fixing the node, be sure to establish a connection to your principal Starlink router's network. When you plug in your mesh node, a new "STARLINK" network emerges; do not join to it.
* Open the Starlink App at this point.
* The Starlink App will notify you with the message "PAIR MESH NODE" shortly after.

**Factory Reset Using the Starlink App**

In the Starlink app running firmware version 2022.08.0 and higher, Starlink has made a "Factory Reset WiFi" feature available.

By following the instructions below, you can factory reset your router from the convenience of your Starlink app if you are using the aforementioned firmware or higher:

* Launch the Starlink programme. Ensure that you are connected to the WiFi network of the Starlink router and that your Starlink status is online.
* Click settings.
* Locate the Factory Reset WiFi option by scrolling down.
* Click Factory Reset.

The factory reset option will erase your WiFi network name, password, and network settings, as it is described on the screen.

**Conclusion**

You can ask Starlink support for assistance if you have any additional questions about the factory reset procedure.

I sincerely hope your reading of my post on how to reset Starlink Router Password has been beneficial and has helped you in the same way.