# 1-866-203-7571 Fix HP Envy 5055 Printing Blank Pages Issue
**HP Printer Support at 1-866-203-7571**
The HP Envy 5055 is a reliable all-in-one inkjet printer, widely used for home and small office printing tasks. However, like any inkjet printer, it may sometimes run into issues—one of the most frustrating being **printing blank pages**. When your HP Envy 5055 prints blank pages, it interrupts productivity and wastes both time and paper. Thankfully, this issue is typically easy to fix once you understand the cause.
This comprehensive 3000-word guide explains **every possible reason** your HP Envy 5055 prints blank pages and outlines **step-by-step solutions** to get your printer working perfectly again. If at any point you need direct assistance, you can also call **HP Printer Support at 1-866-203-7571** for expert help.
**HP Printer Support at 1-866-203-7571**
## **Table of Contents**
1. Introduction: Understanding the Blank Page Issue
2. Common Reasons HP Envy 5055 Prints Blank Pages
3. Basic Checks Before Troubleshooting
4. Fix 1: Check Ink Levels
5. Fix 2: Ensure Ink Cartridges Are Installed Correctly
6. Fix 3: Remove Protective Tapes from Cartridges
7. Fix 4: Clean Printhead Automatically
8. Fix 5: Clean Printhead Manually (Deep Cleaning)
9. Fix 6: Align Printhead
10. Fix 7: Use Genuine HP Ink Cartridges
11. Fix 8: Update Printer Firmware
12. Fix 9: Check Printer Drivers
13. Fix 10: Reset the Printer
14. Fix 11: Clean the Ink Nozzles
15. Fix 12: Run the HP Print and Scan Doctor
16. Fix 13: Fix Connectivity Issues
17. Fix 14: Check for Paper Type or Print Settings
18. Fix 15: Fix Spooler Issues (Windows)
19. Fix 16: Fix Air Bubbles in Ink System
20. Advanced Troubleshooting
21. When to Replace the Printhead
22. Preventing the Blank Page Issue
23. Conclusion
**HP Printer Support at 1-866-203-7571**
# **1. Introduction: Understanding the Blank Page Issue**
When your HP Envy 5055 prints blank pages, it means the printer is going through the printing motion, pulling in paper, and feeding pages—but **no ink appears on the page**. This can happen regardless of whether you print text, photos, or test pages.
Blank prints typically indicate a problem with ink delivery, the printhead, or the printer settings. Before assuming hardware failure, it’s important to go through a systematic troubleshooting process, because **most blank page issues are easily fixable**.
**HP Printer Support at 1-866-203-7571**
# **2. Common Reasons HP Envy 5055 Prints Blank Pages**
Here are the most frequent causes:
### **✔ Low or Empty Ink Cartridges**
Ink levels may be low, or the cartridges may have dried ink.
### **✔ Incorrect or Improper Cartridge Installation**
If the cartridges are not fully seated, the printer cannot draw ink.
### **✔ Protective Tape Not Removed**
New cartridges come with stickers that must be removed.
### **✔ Dirty or Clogged Printhead**
This is one of the most common reasons.
### **✔ Outdated Firmware or Drivers**
Software issues can prevent ink from being released.
### **✔ Wrong Paper or Print Settings**
Incorrect settings may cause blank prints.
### **✔ Air in the Ink System**
Air bubbles can stop ink flow.
### **✔ Faulty Cartridge or Printhead**
Sometimes parts may be defective.
**HP Printer Support at 1-866-203-7571**
# **3. Basic Checks Before Troubleshooting**
Before attempting major fixes, perform these quick checks:
* Ensure the printer is ON.
* Confirm the paper is loaded properly.
* Make sure you are printing the right document and not an invisible text file.
* Restart both the printer and your computer.
* Check if the printer prints a **test page** from the control panel.
If the test page is also blank, the issue is with the printer hardware, ink, or printhead—not the computer.
**HP Printer Support at 1-866-203-7571**
# **4. Fix 1: Check Ink Levels**
One of the first things to inspect is your ink level.
### **How to check ink levels on HP Envy 5055:**
1. From the printer’s touchscreen, go to **Ink Information**.
2. Look at the **Black** and **Tri-color** ink levels.
If any cartridge shows **low**, **empty**, or **depleted**, replace it immediately.
### **Why low ink causes blank pages:**
* The printer cannot spray ink even if a small amount remains.
* Printheads may get clogged when ink dries up.
**Solution:** Replace the low cartridges with genuine HP ink.
**HP Printer Support at 1-866-203-7571**
# **5. Fix 2: Ensure Ink Cartridges Are Installed Correctly**
Sometimes, improperly seated cartridges cause blank pages.
### **How to check installation:**
1. Lift the printer lid.
2. Open the ink access door.
3. Press the cartridges gently until they click into place.
4. Ensure the cartridges match the correct slots:
* **Left** → Tri-color
* **Right** → Black
Close the door and restart your printer.
**HP Printer Support at 1-866-203-7571**
# **6. Fix 3: Remove Protective Tape from Cartridges**
New ink cartridges come with a plastic tab over the copper contacts and nozzles.
### **If not removed:**
The printer will not release ink.
### **What to do:**
1. Remove the cartridge.
2. Check for a blue or orange protective strip.
3. Peel it off carefully—do not touch copper contacts.
4. Reinstall the cartridge.
**HP Printer Support at 1-866-203-7571**
# **7. Fix 4: Clean Printhead Automatically (Recommended First Step)**
The printhead may be clogged with dried ink, especially if you haven’t used the printer for weeks.
### **How to clean printhead from printer menu:**
1. On the printer touchscreen, open **Setup**.
2. Select **Printer Maintenance**.
3. Tap **Clean Printhead**.
4. The printer will clean and print a test pattern.
Repeat this 2–3 times if the output improves but is still faint.
**HP Printer Support at 1-866-203-7571**
# **8. Fix 5: Clean Printhead Manually (Deep Cleaning)**
If automatic cleaning does not fix the issue, deep cleaning is needed.
### **Materials required:**
* Distilled water
* Cotton swabs
* A paper towel
* A small container
### **Steps:**
1. Power off the printer.
2. Remove ink cartridges.
3. Lightly dampen a cotton swab with warm distilled water.
4. Gently clean the printhead area—do not touch copper contacts harshly.
5. Place the cartridges on a dry paper towel (nozzle side down) for 10 minutes.
6. Reinstall cartridges and try printing again.
Manual cleaning helps remove deep clogs.
**HP Printer Support at 1-866-203-7571**
# **9. Fix 6: Align Printhead**
After cleaning, the printhead alignment is important.
### **Steps:**
1. Go to **Setup** > **Tools**.
2. Tap **Align Printer**.
3. Follow on-screen instructions.
Alignment improves ink spray accuracy and prevents blank lines/pages.
**HP Printer Support at 1-866-203-7571**
# **10. Fix 7: Use Genuine HP Ink Cartridges**
HP Envy 5055 is sensitive to non-original or refilled ink.
Third-party ink may:
* Fail to flow properly
* Cause clogs
* Damage the printhead
### **Solution:**
Use genuine HP 63 or 63XL ink cartridges.
**HP Printer Support at 1-866-203-7571**
# **11. Fix 8: Update Printer Firmware**
Outdated firmware/software can interrupt ink flow commands.
### **Steps:**
1. On the printer menu, go to **Setup**.
2. Tap **Printer Maintenance**.
3. Select **Update the Printer**.
Or update via **HP Smart App**.
After updating, restart the printer.
**HP Printer Support at 1-866-203-7571**
# **12. Fix 9: Check Printer Drivers**
If drivers are corrupt, blank pages may print.
### **Fix:**
* Reinstall HP Smart.
* Update printer drivers through Windows/macOS.
* Make the Envy 5055 your **default printer**.
**HP Printer Support at 1-866-203-7571**
# **13. Fix 10: Reset the Printer**
A simple reset solves many temporary glitches.
### **Reset procedure:**
1. Turn off the printer.
2. Unplug the power cable from the back.
3. Wait 60 seconds.
4. Plug it back in and turn ON.
Try printing again.
**HP Printer Support at 1-866-203-7571**
# **14. Fix 11: Clean the Ink Nozzles**
The nozzles deliver ink to paper. If blocked, blank pages occur.
### **How to clean:**
Use automatic printhead cleaning or manually deep clean (explained earlier).
**HP Printer Support at 1-866-203-7571**
# **15. Fix 12: Run the HP Print and Scan Doctor (Windows)**
This is HP’s official tool for diagnosing printing issues.
### **Steps:**
1. Download **HP Print and Scan Doctor** from HP’s website.
2. Install and run it.
3. Select your printer.
4. Let the tool scan and fix issues.
It usually fixes driver errors, connectivity problems, and print spooler failures.
**HP Printer Support at 1-866-203-7571**
# **16. Fix 13: Fix Connectivity Issues**
Sometimes the printer prints blank pages if commands fail.
### **Solutions:**
* Reconnect Wi-Fi.
* Restart the router.
* Use a USB cable to test printing.
**HP Printer Support at 1-866-203-7571**
# **17. Fix 14: Check for Paper Type or Print Settings**
Incorrect settings can cause the printer to produce blank pages.
### **Check:**
* Paper size
* Paper type
* Print quality
* Grayscale mode
* Empty page removal setting
Make sure you are **not** printing a document with white or invisible text.
**HP Printer Support at 1-866-203-7571**
# **18. Fix 15: Fix Spooler Issues (Windows)**
The print spooler manages print jobs. If stuck, blank pages may occur.
### **Steps to fix:**
1. Press **Windows + R**.
2. Type **services.msc**.
3. Find **Print Spooler**.
4. Click **Restart**.
Clear the print queue and attempt printing again.
**HP Printer Support at 1-866-203-7571**
# **19. Fix 16: Fix Air Bubbles in Ink System**
Air bubbles can interrupt ink flow.
### **Solution:**
1. Remove the cartridge.
2. Lightly shake it horizontally.
3. Reinsert the cartridge.
This helps re-prime the ink.
**HP Printer Support at 1-866-203-7571**
# **20. Advanced Troubleshooting**
If none of the above works, perform advanced checks:
### **✔ Check for paper dust in the printhead area**
Dust can block ink spray.
### **✔ Check the ink vent**
If vent slots are blocked, ink won’t flow.
### **✔ Reinstall the HP Smart App**
Corrupt app settings can affect printing.
### **✔ Restore Factory Settings**
Go to **Setup > Printer Maintenance > Restore**.
This clears any configuration issues.
**HP Printer Support at 1-866-203-7571**
# **21. When to Replace the Printhead**
The printhead may be damaged if:
* Automatic and manual cleaning fails
* Ink levels are full but pages remain blank
* The printer shows a printhead error
* Cartridges are recognized but not printing
Printhead failure is rare but possible.
### **Solution:**
Replace the printhead or contact HP support.
**HP Printer Support at 1-866-203-7571**
# **22. Preventing the Blank Page Issue**
To keep your HP Envy 5055 in perfect working condition:
### ✔ Print at least once a week
Prevents ink drying.
### ✔ Keep printer in room temperature
Avoid extreme heat/cold.
### ✔ Use genuine HP ink
Prevents clogging and compatibility issues.
### ✔ Clean the printhead every 1–2 months
Regular maintenance is key.
### ✔ Keep printer firmware updated
Ensures stable performance.
**HP Printer Support at 1-866-203-7571**
# **23. Conclusion**
The **HP Envy 5055 Printing Blank Pages Issue** is frustrating but almost always fixable using the simple steps outlined above. Whether the cause is low ink, clogged printheads, driver issues, or improper cartridge installation, following this guide will help you get your printer working perfectly again.
If your printer still prints blank pages after trying all the fixes, it may indicate a deeper hardware issue. In that case, you can always reach professional assistance.
**HP Printer Support at 1-866-203-7571**
**📞 Need Instant Expert Help?
Call HP Printer Support at 1-866-203-7571**
A technician can walk you through advanced steps, diagnose hardware issues, or help replace faulty parts.
Sign in with Wallet
Connect another wallet