---
# System prepended metadata

title: '1-866-203-7571BrotherMFCJ435WNotPrinting[Fixed]'

---

# 1-866-203-7571 Brother MFC J435W Not Printing [Fixed]

**Brother Support at 1-866-203-7571** 

The **Brother MFC-J435W** is a dependable multifunction inkjet printer known for its wireless printing, compact design, and superior print quality. However, like any printer, it can occasionally run into issues—one of the most common being the **“Brother MFC-J435W Not Printing”** problem.

If your Brother printer has suddenly stopped printing, is printing blank pages, stuck in queue, or refuses to respond altogether—**don’t worry.** This comprehensive 3000-word troubleshooting guide will walk you through **every possible cause and fix**, from basic checks to advanced solutions.

And if you need expert help right away, you can call **Brother Support at 1-866-203-7571** for instant assistance.

**Brother Support at 1-866-203-7571** 

# **1. Overview: Why Is My Brother MFC-J435W Not Printing?**

When the Brother MFC-J435W fails to print, the root cause usually lies in one of the following areas:

### **Common Reasons**

* Printer offline or not connected properly
* Wi-Fi/WLAN connectivity issues
* Outdated or corrupt printer drivers
* Ink cartridge problems or low ink
* Clogged printhead
* Paper jam or hardware blockage
* Incorrect print commands/queue stuck
* Configuration errors in Windows/Mac
* Faulty USB cable
* Firmware issues

This guide addresses all these possible reasons step-by-step.

**Brother Support at 1-866-203-7571** 

# **2. Basic Checks Before Troubleshooting**

Before moving into advanced solutions, ensure the following quick checks:

### **✔ Printer is turned ON**

Make sure the display screen is lit and the printer is not in sleep mode.

### **✔ No error messages**

Check the control panel for errors like:

* “Ink Low”
* “Paper Jam”
* “Offline”
* “Cannot Print”
* “Clean Printhead Required”

### **✔ Ink levels are sufficient**

Low or empty cartridges often cause blank printouts.

### **✔ Paper is loaded correctly**

Improperly loaded sheets may prevent printing.

### **✔ Correct printer selected on your device**

Sometimes the wrong printer is chosen, especially if multiple devices are installed.

If all looks good, start troubleshooting.

**Brother Support at 1-866-203-7571** 

# **3. Fix 1: Restart the Printer and Devices**

Sometimes the simplest solution works best.

### **Steps to Power-Reset Brother MFC-J435W**

1. Turn OFF the Brother printer.
2. Unplug the power cord from the wall.
3. Wait 60 seconds.
4. Plug the printer back in and turn it ON.

### **Restart Your Computer/Wi-Fi Router**

1. Restart PC or laptop.
2. Reboot your Wi-Fi router if you are using wireless printing.

A fresh restart often clears temporary software glitches.

**Brother Support at 1-866-203-7571** 

# **4. Fix 2: Check Printer’s Connection (Wi-Fi/USB)**

Printing issues are usually caused by lost connectivity. Ensure your Brother MFC-J435W is connected correctly.

**Brother Support at 1-866-203-7571** 

## **A. Check Wireless Connection**

On the printer’s control panel:

1. Press **Menu**.
2. Go to **Network settings**.
3. Choose **WLAN** → **Connection Status**.

Check whether:

* The network name (SSID) is correct
* IP address is assigned
* Signal strength is stable

### **If the printer is not connected**

Reconnect using:

**Menu → Network → WLAN → Setup Wizard**
Select your Wi-Fi network and enter the password.

**Brother Support at 1-866-203-7571** 

## **B. Check USB Cable Connection**

If using USB printing:

* Ensure the cable is not damaged.
* Try plugging into a different USB port.
* Avoid USB hubs—connect directly to computer.
* Replace the cable if needed.

**Brother Support at 1-866-203-7571** 

# **5. Fix 3: Set Brother Printer as Default (Windows/Mac)**

### **Windows**

1. Open **Control Panel**.
2. Click **Devices and Printers**.
3. Right-click **Brother MFC-J435W** → Select **Set as Default Printer**.

A green checkmark should appear.

### **Mac**

1. Go to **System Preferences** → **Printers & Scanners**.
2. Choose **Brother MFC-J435W** from list.
3. Set it as **Default Printer**.

If another device was selected, your Brother printer would not print.

**Brother Support at 1-866-203-7571** 

# **6. Fix 4: Clear the Print Queue**

A stuck print job can completely stop the printer.

### **Windows Steps**

1. Open **Run** (Windows + R).
2. Type **services.msc** → hit Enter.
3. Scroll to **Print Spooler**.
4. Right-click → **Stop**.
5. Go to:
   `C:\Windows\System32\spool\PRINTERS`
6. Delete all files inside.
7. Go back and restart the **Print Spooler**.

### **Mac Steps**

1. Go to **System Preferences → Printers & Scanners**.
2. Select printer → click **Open Print Queue**.
3. Remove all pending jobs.

Now try printing again.

**Brother Support at 1-866-203-7571** 

# **7. Fix 5: Update or Reinstall Brother Printer Drivers**

Outdated or corrupt drivers prevent printing.

**Brother Support at 1-866-203-7571** 

## **Windows Driver Update**

1. Go to **Control Panel → Devices and Printers**.
2. Right-click **Brother MFC-J435W** → **Remove Device**.
3. Visit Brother’s official support page.
4. Download the latest drivers for your operating system.
5. Install and restart PC.

**Brother Support at 1-866-203-7571** 

## **Mac Driver Update**

1. Remove the existing printer from **Printers & Scanners**.
2. Download macOS drivers from Brother website.
3. Install and reconnect.

**Brother Support at 1-866-203-7571** 

## **Driver Auto-Installation (Easy Way)**

If Windows/Mac detects the printer automatically, simply follow on-screen prompts.

**Brother Support at 1-866-203-7571** 

# **8. Fix 6: Check Ink Cartridges and Replace if Needed**

The Brother MFC-J435W uses four separate ink tanks:

* Black
* Cyan
* Magenta
* Yellow

### **Common Cartridge Issues**

* Empty or low ink
* Improper installation
* Fake or third-party cartridges
* Clogged nozzles

**Brother Support at 1-866-203-7571** 

### **Steps to Check Ink Levels**

1. Press **Ink** on the printer panel.
2. Select **Ink Volume**.

If levels are low, replace the cartridges.

**Brother Support at 1-866-203-7571** 

### **Proper Cartridge Installation**

1. Open the ink door.
2. Remove the cartridge.
3. Reinsert until it clicks.
4. Ensure correct slot alignment.

**Brother Support at 1-866-203-7571** 

### **Important:**

Using non-Brother cartridges can lead to:

* Print quality issues
* Not printing errors
* Ink detection failure

For best performance, use genuine Brother cartridges.

**Brother Support at 1-866-203-7571** 

# **9. Fix 7: Clean Printhead to Fix Blank or Faded Prints**

If your Brother MFC-J435W prints blank pages or missing colors, the printhead may be clogged.

**Brother Support at 1-866-203-7571** 

## **Automatic Printhead Cleaning**

1. Press **Ink**.
2. Select **Cleaning**.
3. Choose **Black**, **Color**, or **All**.

Run the cleaning cycle 2–3 times.
Then print a **Test Page**.

**Brother Support at 1-866-203-7571** 

## **Manual Cleaning (Advanced Users)**

If automatic cleaning doesn’t work, manual printhead cleaning may be required, using:

* Cleaning solution
* Lint-free cloth
* Syringe method

This should be done carefully.

For expert assistance, call **1-866-203-7571**.

**Brother Support at 1-866-203-7571** 

# **10. Fix 8: Check for Paper Jam or Hardware Obstruction**

Paper jams can silently stop the printing process even if no error appears.

**Brother Support at 1-866-203-7571** 

## **Where to Check for Jams**

* Paper tray
* Rear access door
* Output tray
* Inside ink cartridge area
* Under the scanner lid

Remove any stuck pieces carefully.

**Brother Support at 1-866-203-7571** 

## **How to Properly Remove Jammed Paper**

1. Turn OFF the printer.
2. Gently pull the jammed sheet in the direction of natural movement.
3. Remove all small fragments.
4. Avoid tearing the paper further.

**Brother Support at 1-866-203-7571** 

# **11. Fix 9: Reset Network Settings (Wi-Fi Issues)**

If the Brother MFC-J435W is not printing due to wireless issues, reset and reconnect WLAN.

**Brother Support at 1-866-203-7571** 

## **Reset WLAN**

1. Press **Menu**.
2. Go to **Network**.
3. Select **WLAN**.
4. Choose **Factory Reset**.

Then run Wireless Setup Wizard again.

**Brother Support at 1-866-203-7571** 

# **12. Fix 10: Check Firmware Updates**

Brother frequently releases fixes for bugs and connectivity issues.

### **Steps to Update Firmware**

1. Visit Brother Support website.
2. Search **MFC-J435W**.
3. Download latest **Firmware Update Tool**.
4. Run installer and follow steps.

Firmware updates often solve:

* Not printing
* Wi-Fi dropping
* Carriage issues
* Print queue freezes

**Brother Support at 1-866-203-7571** 

# **13. Fix 11: Disable “Use Printer Offline” Mode (Windows)**

Sometimes Windows mistakenly sets the printer to offline mode.

### **How to Disable**

1. Go to **Control Panel → Devices and Printers**.
2. Right-click Brother printer.
3. Uncheck **Use Printer Offline**.

**Brother Support at 1-866-203-7571** 

# **14. Fix 12: Reconnect Brother Printer to Wi-Fi Network**

If you changed your Wi-Fi password or router, reconnect the printer.

**Brother Support at 1-866-203-7571** 

## **Wireless Setup Wizard**

1. Press **Menu**.
2. Go to **Network**.
3. Select **WLAN**.
4. Choose **Setup Wizard**.
5. Pick Wi-Fi network → Enter password.

**Brother Support at 1-866-203-7571** 

# **15. Fix 13: Check IP Address Conflicts**

If your printer IP is changed or duplicated, printing will fail.

**Brother Support at 1-866-203-7571** 

## **Check IP Address**

1. Press **Menu → Print Reports**.
2. Print **Network Configuration**.

Ensure:

* IP is valid
* No conflicts exist

If required, assign a **static IP** via the router.

**Brother Support at 1-866-203-7571** 

# **16. Fix 14: Reinstall Printer on Windows/Mac**

If nothing else works, reinstall the entire printing system.

**Brother Support at 1-866-203-7571** 

## **Windows**

1. Go to **Devices and Printers**.
2. Remove Brother printer.
3. Restart PC.
4. Install fresh drivers.
5. Reconnect printer.

**Brother Support at 1-866-203-7571** 

## **Mac (Full Reset)**

1. Go to **Printers & Scanners**.
2. Right-click in the printer list.
3. Select **Reset Printing System**.
4. Add Brother printer again.

**Brother Support at 1-866-203-7571** 

# **17. Fix 15: Hardware Reset for Brother MFC-J435W**

A full reset clears internal glitches.

### **Steps**

1. Press **Menu**.
2. Go to **Initial Setup**.
3. Choose **Reset**.
4. Select **Factory Reset**.

Your printer will reboot.

**Brother Support at 1-866-203-7571** 

# **18. Fix 16: Check Print Settings (Windows/Mac)**

### **On Windows**

* Open **Print Preferences**.
* Ensure correct paper size/type.
* Disable “Gray Scale” if printing in color.
* Make sure **Online** status shows active.

### **On Mac**

* Check printer preset options.
* Select correct paper tray.
* Ensure color settings are correct.

Incorrect settings can prevent printing or cause blank pages.

**Brother Support at 1-866-203-7571** 

# **19. Fix 17: Print a Test Page**

A test page helps diagnose hardware issues.

### **Windows**

* Go to **Devices and Printers** → Right-click printer → **Printer Properties** → **Print Test Page**.

### **On Printer**

* Press **Menu → Print Reports → Print Test Page**.

If test page fails, issue is likely hardware-related.

**Brother Support at 1-866-203-7571** 

# **20. Fix 18: Brother MFC-J435W Printing Blank Pages – Solutions**

This problem is extremely common.

### **Causes**

* Clogged printhead
* Empty ink
* Incorrect paper type
* Air bubbles in cartridge

### **Fixes**

* Run 3–4 printhead cleaning cycles
* Reinstall ink cartridges
* Use high-quality paper
* Update firmware

If still printing blank pages, call support.

**Brother Support at 1-866-203-7571** 

# **21. Fix 19: Brother MFC-J435W Not Printing Black—Solutions**

When only color prints but black doesn’t:

### **Fixes**

* Ensure black cartridge is full
* Clean black nozzles
* Replace black cartridge
* Clean printhead 2–3 times

**Brother Support at 1-866-203-7571** 

# **22. Fix 20: Wireless Printing Not Working – Fixes**

### **Fixes**

* Reconnect Wi-Fi
* Restart router
* Assign static IP
* Reinstall wireless drivers
* Check Wi-Fi interference

**Brother Support at 1-866-203-7571** 

# **23. Fix 21: USB Printing Not Working – Fixes**

### **Fixes**

* Replace USB cable
* Reinstall USB drivers
* Try different port
* Disable USB selective suspend in Windows

**Brother Support at 1-866-203-7571** 

# **24. When to Contact Brother Support at 1-866-203-7571**

If you have tried all troubleshooting steps and the printer still won’t print, the issue may be:

* Damaged printhead
* Faulty motherboard
* Wi-Fi module failure
* Sensor failure
* Ink pump system blockage

At this point, professional diagnosis is required.

Call **Brother Printer Support: 1-866-203-7571**
Experts can guide you through advanced solutions or arrange service.

**Brother Support at 1-866-203-7571** 

# **Conclusion**

The **Brother MFC-J435W Not Printing** problem can occur for various reasons—from simple connectivity issues to complex hardware failures. This 3000-word guide has covered every known fix, including print queue troubleshooting, driver updates, Wi-Fi resets, printhead cleaning, and system-level repairs.

By following the above steps, most printing issues can be resolved at home without needing service.

If you still face issues, don’t hesitate to contact **certified Brother Printer Support at 1-866-203-7571** for fast and reliable assistance.

**Brother Support at 1-866-203-7571** 

