# 1-866-203-7571 How to Do Canon G6020 WiFi Setup?

**Phone support (as provided): 1-866-203-7571**

Getting your Canon PIXMA G6020 connected to Wi-Fi opens up wireless printing from computers, laptops, phones and tablets — no USB cable required after setup. This guide walks you through everything: what you need before you start, multiple setup methods (WPS, standard wireless setup from Windows/macOS, and mobile setup using Canon’s app), how to configure useful settings, common problems and fixes, and tips to keep your printer and network secure. Follow the steps closely and you’ll have wireless printing working in no time.

**Phone support (as provided): 1-866-203-7571**

# Before you start — checklist and requirements

Make sure you have the following before attempting Wi-Fi setup:

1. **Canon G6020 printer** with power cable connected and turned ON.
2. **Active Wi-Fi network (router)** broadcasting SSID (network name). Know the SSID and Wi-Fi password (WPA2/WPA3 key).
3. **A computer (Windows/macOS)** or **smartphone/tablet** on the same Wi-Fi network you intend to use.
4. **USB cable** if you need to do a temporary wired setup or install drivers (optional).
5. **Canon PRINT Inkjet/SELPHY app** installed on your phone (iOS App Store or Android Google Play).
6. If using WPS, **your router must support WPS Push Button**. (Not all routers do.)
7. Optional but recommended: download the latest Canon G6020 drivers & software from Canon’s official support site to ensure best compatibility (driver install can also help the setup).

**Phone support (as provided): 1-866-203-7571**

# Quick overview — three main setup methods

1. **WPS (Push Button)** — the fastest if your router supports it. No need to type the Wi-Fi password.
2. **Standard Wireless Setup from Printer Control Panel** — enter SSID and password directly on the printer. Good when WPS is not available.
3. **Smartphone App (Canon PRINT)** — ideal for mobile users and easiest for many.

We’ll cover each method in detail, plus extra configuration steps (static IP, AirPrint/Mopria, network reset) and troubleshooting.

**Phone support (as provided): 1-866-203-7571**

# Method 1 — WPS Push Button (fastest)

Use WPS when your router has a WPS button and you prefer a quick setup.

1. **Power on the printer.** Make sure it's on the Home screen.
2. **Press and hold the printer’s Wi-Fi button** or go to the network settings screen depending on the control panel behavior (on Canon G6020 you typically press and hold the Wi-Fi button until the LED flashes).
3. **Activate WPS on the router**: within 2 minutes, press the **WPS Push Button** on your router. (Some routers have a WPS option in the web admin interface if there’s no physical button.)
4. **Wait**: the printer and router will negotiate. The Wi-Fi LED on the printer will stop blinking and remain lit when connected successfully.
5. **Print a network status page** (optional) to confirm the SSID and IP address.

If the connection fails, try again or use Method 2. Some routers have WPS disabled by default for security — check your router’s settings if it doesn’t respond.

**Phone support (as provided): 1-866-203-7571**

# Method 2 — Standard Wireless Setup (from printer)

This method uses the printer’s control panel to manually choose your network and type the password.

1. **Turn on the printer.** Ensure it’s ready.
2. **Open the Setup menu** on the printer’s display. On G6020, press the `Setup` or `Menu` button.
3. **Navigate to Wireless LAN setup** (may be named “Wireless LAN setup,” “LAN settings,” or “Wireless settings”).
4. **Select “Standard setup” (or “Manual connect”)**. The printer will search for nearby Wi-Fi networks.
5. **Choose your SSID (network name)** from the list. If your SSID is hidden, choose the option to enter SSID manually and type it exactly (case sensitive).
6. **Enter your Wi-Fi password** using the on-screen keyboard. Be careful with uppercase/lowercase.
7. **Confirm and start connection**. The printer will attempt to connect; the Wi-Fi LED will blink during this process and stay steady once connected.
8. **Install drivers on computers**: after the printer is on the network, install the Canon G6020 drivers on each computer that will print. During software setup choose “Wireless” as connection method.

Tip: During setup it helps to have the router and printer close by (within 1–2 meters) to avoid signal interruptions.

**Phone support (as provided): 1-866-203-7571**

# Method 3 — Canon PRINT Inkjet/SELPHY app (smartphone/tablet)

The Canon PRINT app simplifies setup for mobile users.

1. **Install Canon PRINT Inkjet/SELPHY** from the App Store or Play Store.
2. **Open the app** and grant any permissions it asks (location is sometimes needed to discover local printers).
3. **Choose “Add Printer”** or the `+` sign in the app. The app will attempt to find printers on the same Wi-Fi network.
4. If the printer isn’t on your Wi-Fi, put the printer into **wireless setup mode** (press and hold Wi-Fi button until flashing, or use the Menu → Wireless LAN setup).
5. The app usually gives two options: **Connect via Wi-Fi** (if the phone is on the same Wi-Fi) or **Access Point mode** (the printer creates a temporary hotspot you connect to). For most users, use the first option.
6. **Follow the in-app prompts** to select your SSID and enter the Wi-Fi password. The app will transfer the credentials to the printer.
7. **Complete the setup** and test by printing a sample photo or document from the app.

Note: If your phone uses mobile data or a different Wi-Fi, connect your phone to the same Wi-Fi network you want the printer on before starting.

**Phone support (as provided): 1-866-203-7571**

# Installing drivers and software on Windows & macOS

Even after the printer is connected to Wi-Fi, installing Canon’s drivers and utilities is recommended for full functionality (scanning, maintenance, status monitor). Here’s how:

## Windows

1. Visit Canon’s official support page for the PIXMA G6020 and download the **Full Driver & Software Package** for your Windows version.
2. Run the installer and choose **Wireless LAN Connection** when asked for the connection method.
3. The installer will search for the printer on your network — select it and finish installation.
4. Print a test page.

## macOS

1. Download the Mac driver package from Canon’s support site for the G6020.
2. Run the installer. On macOS, once the printer is on the network, the installer will detect it.
3. Alternatively, add the printer via **System Settings → Printers & Scanners → +** and choose the Canon G6020 (AirPrint or Canon IJ). Using the Canon driver gives full features.

**Phone support (as provided): 1-866-203-7571**

# Mobile and wireless printing options

Once the G6020 is on your network you can print from:

* **Canon PRINT Inkjet/SELPHY app** (Android/iOS) — full features for photos and maintenance.
* **Apple AirPrint** — iPhone/iPad can print directly if the printer supports AirPrint (check driver options).
* **Mopria (Android)** — many Android phones support Mopria for direct printing.
* **Windows 10/11** — install Canon drivers and print from any application.
* **Google Cloud Print** — deprecated; instead use Canon’s cloud printing options or vendor apps.
* **Network shared printing** — share the printer from a PC on the network (less recommended; direct network printing is better).

**Phone support (as provided): 1-866-203-7571**

# Assigning a static IP (optional but useful)

A static IP prevents the printer’s address from changing, which is useful for shared networks and port forwarding.

1. **Find current IP**: print a network status page or check the printer’s network settings to see the IP assigned by DHCP.
2. **Log in to your router admin page**. Look for DHCP reservation or static lease settings.
3. **Reserve the printer’s MAC address** and map it to a fixed IP within your network range. This is preferred over setting a static IP on the printer itself.
4. **Alternatively on the printer**, go to network settings → TCP/IP settings → manual and set IP, subnet mask and gateway. Use addresses consistent with your router’s subnet.
5. **Reboot** the printer and confirm it’s reachable by pinging the IP from a computer.

Tip: Use DHCP reservation in the router for easier management.

**Phone support (as provided): 1-866-203-7571**

# Troubleshooting — common problems and fixes

If the Wi-Fi setup fails or connectivity is unreliable, try these steps in order:

### 1. Printer won’t find the Wi-Fi network

* Ensure the router is broadcasting SSID (not hidden). If hidden, use manual SSID entry.
* Confirm your network is 2.4 GHz; some printers don’t see 5 GHz networks. The G6020 typically supports 2.4 GHz. If your router has separate SSIDs for 2.4 and 5 GHz, pick the 2.4 GHz one.
* Move printer closer to router to rule out signal issues.

### 2. Incorrect password / authentication errors

* Re-enter Wi-Fi password carefully; it’s case-sensitive.
* If using special characters, ensure the printer’s keyboard mapping matches (rare issue). Try a simpler password temporarily for setup (then change and reconfigure).

### 3. Printer connected but can’t print from computer

* Ensure both devices (printer and computer/phone) are on the same subnet and same Wi-Fi network.
* Confirm driver installation on the computer — reinstall Canon drivers and choose wireless connection.
* Ping the printer IP to verify network reachability.
* Disable VPNs on computers during setup (VPNs can route traffic away from the local network).

### 4. Intermittent connection / prints fail mid-job

* Check for Wi-Fi interference (microwaves, cordless phones, neighboring networks). Try changing the router channel.
* Update firmware on the printer and router to latest versions.
* Assign a static IP or DHCP reservation to reduce occasional DHCP conflicts.

### 5. WPS fails to connect

* Confirm WPS is enabled in router settings (some routers disable by default for security).
* Try again within the short WPS activation window (usually 1–2 minutes).
* If WPS is not supported or disabled, use standard setup.

### 6. Printer’s Wi-Fi LED blinking or off

* Blinking often means searching or trying to connect. Reset network settings on the printer and start over.
* To reset network settings: go to Setup → Device settings → Reset settings → Network settings (this clears previous Wi-Fi settings). Then retry setup.

### 7. App can’t find printer

* Make sure the phone is on the same Wi-Fi network.
* Reboot the printer and phone.
* Temporarily turn off mobile data or other Wi-Fi networks on the phone.

If problems persist, having the printer model, firmware version, router make/model, and a description of where it fails will help support (you can call the provided number 1-866-203-7571 for phone assistance as available).

**Phone support (as provided): 1-866-203-7571**

# Network security tips

Wireless printers are devices on your network — keep them secure:

1. **Use WPA2/WPA3 encryption** on your Wi-Fi network — do not use open or WEP networks.
2. **Change default router admin password** to a strong password.
3. **Firmware updates**: check Canon support periodically for printer firmware updates and apply them.
4. **Guest network for visitors**: if you host guests who need printing, consider a guest Wi-Fi and enable isolation from your main devices.
5. **Disable WPS** after setup if it’s not needed; WPS has security vulnerabilities for some router models.
6. **Printer access control**: use router MAC filtering if you want to restrict devices (not foolproof).
7. **Avoid exposing the printer to the internet**: don’t set up port forwarding to the printer unless necessary. If you need remote access, use secure vendor cloud solutions.

**Phone support (as provided): 1-866-203-7571**

# Maintenance & useful tips

* **Keep ink tanks filled** — G series printers use refillable tanks; low ink can interrupt prints.
* **Clean printheads** using the printer’s maintenance menu when print quality degrades.
* **Use Canon genuine ink** for best reliability (third-party inks can be cheaper but may affect performance).
* **Print a nozzle check and alignment** after installation to ensure perfect output.
* **Save energy** by using sleep mode; set it in printer settings.
* **Label your printer** on the network with a friendly name so users can find it easily (e.g., “Office-Canon-G6020”).

**Phone support (as provided): 1-866-203-7571**

# Frequently Asked Questions (FAQs)

**Q: Do I need to install drivers to print from a phone?**
A: Not always. Phones can use AirPrint (iOS) or Mopria (Android) without Canon drivers. For full features (scanning, maintenance), the Canon PRINT app plus drivers on computers are recommended.

**Q: My router is 5 GHz only — will the G6020 work?**
A: The G6020 commonly uses 2.4 GHz. If your router is 5 GHz only, the printer may not see it. Use a dual-band router or create a 2.4 GHz SSID.

**Q: Can multiple computers print to the G6020 over Wi-Fi?**
A: Yes. Install the Canon driver on each computer and connect them to the same network.

**Q: Can I print when my computer is off?**
A: Yes — as long as the printer is connected to the Wi-Fi and you’re printing from another device (phone, tablet, or another computer). But some features like scanning to a PC require the PC to be on.

**Q: Is cloud printing available?**
A: Canon provides certain cloud printing/scanning features; check the Canon PRINT app and official Canon support for cloud options available for your region.

**Phone support (as provided): 1-866-203-7571**

# Quick reference: step-by-step for a common setup (summary)

1. Turn on Canon G6020.
2. On printer: Setup → Wireless LAN setup → Standard setup.
3. Select your SSID (2.4 GHz) and enter password.
4. Wait for Wi-Fi LED to stop blinking (solid = connected).
5. On computer/phone, install Canon PRINT app or drivers.
6. Add the printer from the app or system print settings.
7. Print test page.

**Phone support (as provided): 1-866-203-7571**

# When to call support

If you try all recommended steps and still can’t get the printer on Wi-Fi, or you see hardware error codes or persistent network failures, contact Canon support or your local service provider. The phone number you provided for assistance is **1-866-203-7571** — have the printer model (Canon G6020), serial number (from sticker), router model, and a short description of the issue ready for faster help.

**Phone support (as provided): 1-866-203-7571**

# Final checklist before you finish

* [ ] Printer power ON and Wi-Fi LED steady.
* [ ] Correct SSID and Wi-Fi password used.
* [ ] Your device and printer on the SAME network and band (2.4 GHz if needed).
* [ ] Canon drivers or Canon PRINT app installed for full functionality.
* [ ] Test print successful.
* [ ] Consider DHCP reservation / static IP to prevent future connection drift.
* [ ] Firmware up to date for both router and printer.

**Phone support (as provided): 1-866-203-7571**

# Conclusion

Setting up Wi-Fi on the Canon PIXMA G6020 is straightforward using WPS, the printer’s control panel, or Canon’s mobile app. If you follow the step-by-step instructions in this guide, you should be up and printing wirelessly with minimal fuss. Keep the firmware and drivers current, secure your network with WPA2/WPA3, and consider assigning a static IP for long-term stability.

If anything goes sideways and you’d like live assistance, you can call the support number provided: **1-866-203-7571**. Provide the printer model and a brief description — they’ll walk you through the remaining steps.