---
# System prepended metadata

title: ' 1-866-203-7571HowtoConnectHPDeskJetPlus4152PrintertoWiFi?'

---

# 1-866-203-7571 How to Connect HP DeskJet Plus 4152 Printer to WiFi?

**Helpline:** 1-866-203-7571**

Getting your HP DeskJet Plus 4152 printer onto your Wi-Fi network can feel fiddly the first time — but once you know the simple steps, it’s fast and painless. This guide walks you through everything: preparation and checks, three different connection methods (HP Smart app, WPS, and temporary USB setup), common errors and fixes, mobile printing, network security tips, and frequently asked questions. Read straight through or jump to the section you need.

**Helpline:** 1-866-203-7571**

## Quick overview (TL;DR)

1. Make sure your Wi-Fi network is working and you know the SSID (network name) and password.
2. Power on the printer and place it within range of your router.
3. Use the **HP Smart app** on your phone/tablet/computer — that’s the easiest method for most users.
4. Alternatively, use **WPS Push Button** (if your router supports it) or connect with **USB** for a temporary setup and then switch to wireless.
5. If anything fails, run a network reset on the printer, restart devices, update firmware, or check router settings. Call 1-866-203-7571 if you need direct support.

**Helpline:** 1-866-203-7571**

## Before you start — checklist

Make sure you have the following ready:

* Your **Wi-Fi network name (SSID)** and **Wi-Fi password** (case sensitive).
* The **HP DeskJet Plus 4152** plugged in and powered on.
* A smartphone, tablet, or computer connected to the **same** Wi-Fi network you want the printer to use.
* The **HP Smart app** installed (recommended) on your mobile device or the printer drivers for your PC if you want to set up from a computer.
* Your **router** (within a few meters ideally) and its WPS button available if you plan to use WPS.
* If you use dual-band Wi-Fi (2.4 GHz and 5 GHz), prefer the **2.4 GHz** band for initial setup — it has better range and is widely compatible.

**Helpline:** 1-866-203-7571**

## Part A — Prepare the printer and network

### 1. Power cycle and placement

* Turn the printer on and ensure it’s not showing errors.
* Keep the printer within **5–10 meters** of the router (no thick walls or heavy interference).
* Avoid placing the printer near microwaves, Bluetooth speakers, or cordless phones during setup.

### 2. Check router settings

* Confirm the router’s Wi-Fi is **on** and broadcasting the SSID you intend to connect to.
* Disable any temporary guest network or captive portal during setup.
* If MAC filtering is enabled on your router, either temporarily disable it or add the printer’s MAC address (found on the printer’s network configuration page).
* If you have both 2.4 GHz and 5 GHz bands, consider temporarily disabling 5 GHz, or ensure your device is on the same band you’ll use for the printer.

### 3. Reset printer network (if needed)

If the printer was previously connected to another network or acting oddly, reset its network settings:

* On many HP DeskJet models: press and hold the **Wireless** button for about **5–10 seconds** until the wireless light blinks — then let go. This clears saved network settings.
* Consult the on-screen or manual prompt if lights/panel differ.

**Helpline:** 1-866-203-7571**

## Part B — Method 1: Use the **HP Smart** app (recommended)

The HP Smart app handles driver installation and network setup automatically and is the most user-friendly method.

### 1. Install HP Smart

* On your smartphone or tablet: open the App Store (iOS) or Google Play Store (Android).
* Search **HP Smart** and install it.
* On Windows or macOS, you can download HP Smart from the Microsoft Store or Apple Store, or get drivers from HP’s site.

### 2. Open HP Smart and sign in

* Launch the app. You can sign in with an HP account (recommended for cloud features) or proceed as a guest.
* Ensure your mobile device is connected to the **same Wi-Fi network** you intend for the printer.

### 3. Add the printer

* Tap the **+** or **Add Printer**. The app will search for printers on the network or nearby via Bluetooth.
* If HP Smart finds your DeskJet 4152, select it and follow on-screen prompts to complete setup. The app will transfer your Wi-Fi credentials securely to the printer.

### 4. If HP Smart doesn’t find the printer

* Make sure Bluetooth is enabled on the mobile device (some HP models use Bluetooth for initial detection).
* Turn the printer’s wireless off and on again (press the wireless button).
* Ensure the printer is in **setup mode** — the wireless light should be blinking. If not, press and hold the wireless button until it starts blinking.

### 5. Complete setup and print a test page

* After configuration, HP Smart will install the necessary drivers and show the printer as ready.
* Print a test page from the app to confirm connectivity.

**Helpline:** 1-866-203-7571**

## Part C — Method 2: Connect via **WPS (Wi-Fi Protected Setup)**

WPS is a one-button method — quick but requires your router to support WPS.

### 1. Check router for a **WPS** button

* The router will usually have a labeled button “WPS” or an icon with two arrows forming a circle.

### 2. Put the printer in WPS mode

* On the DeskJet 4152, press and hold the **Wireless** button until the wireless light starts blinking (the printer enters setup mode).
* Some models have a dedicated WPS mode on the control panel — follow prompts if shown.

### 3. Press the router’s WPS button

* Within **2 minutes** of the printer entering WPS mode, press the router’s **WPS** button.
* The devices will exchange credentials and connect. The wireless light on the printer should become steady to indicate success.

### 4. Confirm

* Print a network configuration or test page to confirm the printer joined the correct Wi-Fi network.

> **Security note:** WPS can be insecure if left enabled; you can disable WPS on the router after setup.

**Helpline:** 1-866-203-7571**

## Part D — Method 3: Temporary USB setup (then switch to wireless)

If wireless setup fails, you can connect the printer to a computer via USB, install drivers, and then configure wireless from the HP software.

### 1. Connect with USB

* Use a USB A-B cable to connect the printer to a computer.
* Windows/Mac should detect the printer; if not, download the HP Easy Start or full driver package from HP’s website.

### 2. Run HP Easy Start or HP Full Software

* During installation, choose **Wireless connection** when prompted. The software will ask for your SSID and password and will configure the printer for wireless.
* Once configured, you can disconnect the USB cable — the printer will join the Wi-Fi.

### 3. Verify and remove USB

* Print a wireless test page from the computer to verify.
* Remove the USB cable and continue printing wirelessly.

**Helpline:** 1-866-203-7571**

## Part E — Troubleshooting common issues

### Problem: Printer won’t find Wi-Fi network

* Ensure SSID broadcast is enabled and network is 2.4 GHz if possible.
* Reboot the router and printer.
* Move the printer closer to the router.
* Temporarily turn off network isolation/guest mode.
* If SSID has special characters, try a simpler SSID or temporarily rename the network for setup.

### Problem: Wrong password or authentication failed

* Re-enter the Wi-Fi password carefully — passwords are case sensitive.
* If your router uses enterprise WPA/WPA2-Enterprise (with username), home printers usually don’t support it — switch to WPA2-PSK.

### Problem: Printer connects but prints fail from some devices

* Make sure the device trying to print is on the **same network** as the printer.
* Check firewall settings on the PC — allow HP apps and printer services.
* Reinstall HP drivers on the affected device.

### Problem: Wireless light blinks slowly or rapidly

* Blinking indicates the printer is trying to connect or is in setup mode. Refer to the manual for the exact blink pattern, restart the printer and router, and attempt setup again.

### Problem: The HP Smart app can’t find the printer

* Ensure Bluetooth is enabled on your mobile device (for initial discovery).
* Update HP Smart to the latest version.
* Try adding the printer by IP address (in the app or Windows printer settings) if you can get the printer’s current IP from the router.

### Problem: IP address conflicts

* Check your router’s DHCP settings; ensure it can issue IPs and there aren’t conflicts.
* Reserve an IP for the printer in the router’s DHCP reservation area to prevent future conflicts.

**Helpline:** 1-866-203-7571**

## Part F — Advanced tips & network settings

### Assign a static IP (optional, for reliability)

* Once connected, assign a static IP in your router (DHCP reservation) so the printer’s IP doesn’t change. This helps computers find it consistently.

### Disable AP isolation / client isolation

* Some routers have “AP Isolation” or “Client Isolation” which prevents devices on Wi-Fi from communicating with each other. Disable that if you want mobile devices to print.

### Firmware updates

* Visit HP support or use the HP Smart app to check for firmware updates for the printer — updates can fix connectivity bugs.

### Use a separate SSID for IoT devices (advanced)

* For security, you might place printers on a separate but trusted SSID; just ensure devices that need to print can reach that SSID.

**Helpline:** 1-866-203-7571**

## Part G — Printing from phones/tablets (mobile printing)

### HP Smart mobile printing

* HP Smart supports printing photos, documents, and webpages directly from your phone. Open the file in HP Smart and choose the printer.

### Apple AirPrint (iOS)

* If your printer supports AirPrint, your iPhone/iPad will detect the DeskJet automatically when on the same Wi-Fi network. Tap **Share → Print**, select the DeskJet and print.

### Mopria (Android)

* Most modern Android devices support Mopria; select **Print** from the share menu and choose the HP DeskJet.

### Google Cloud Print (deprecated)

* Google Cloud Print is discontinued. Use HP Smart or AirPrint/Mopria for mobile printing.

**Helpline:** 1-866-203-7571**

## Part H — Security and privacy tips

* Use a strong unique Wi-Fi password (12+ characters, mix of letters, numbers, symbols).
* Turn off WPS after using it.
* Keep printer firmware updated to patch vulnerabilities.
* If the printer supports user PINs or control panel locks, set them to prevent unauthorized access.
* Use guest networks for visitors — keep your main devices and printer on a private network.

**Helpline:** 1-866-203-7571**

## Part I — How to print a Wireless Test Report (useful for diagnostics)

Most HP printers can print a network configuration or wireless test report that shows the printer’s IP and network status.

* Press and hold the **Wireless** and **Cancel** buttons (or consult the manual for your exact key combo) until the printer prints a report.
* Check the printed report for the **IP address**, **SSID**, and connection status.

**Helpline:** 1-866-203-7571**

## Part J — If nothing works: a concise troubleshooting checklist

1. Restart router and printer.
2. Confirm mobile/computer is on same Wi-Fi.
3. Ensure correct password (retype).
4. Use HP Smart app for guided setup.
5. Try WPS if available.
6. Temporarily connect with USB and configure via HP software.
7. Reset printer network settings and try again.
8. Update printer firmware with a USB or from HP Smart.
9. Check router settings (AP/client isolation, MAC filter, WPA mode).
10. Reserve a static IP for the printer.
11. If still stuck, call support at **1-866-203-7571** for step-by-step assistance.

**Helpline:** 1-866-203-7571**

## Troubleshooting examples (real-world scenarios)

### Example 1 — Printer won’t connect after router change

If you replace or change your router, the SSID/password will change. Reset the printer’s wireless settings (hold Wireless button ~5–10 seconds) and run the HP Smart setup again with the new network credentials.

### Example 2 — Printer is “offline” on Windows

* Open **Devices and Printers**, right-click the DeskJet → **See what’s printing** → Printer → uncheck **Use Printer Offline**.
* If the printer still shows offline, re-add it using **Add a printer** and choose the wireless HP DeskJet (or add by IP).

### Example 3 — Printing slow or jobs stuck

* Cancel all jobs at the printer and the computer.
* Restart router and printer.
* Use a wired connection temporarily (USB) to clear any job queuing issues then switch back to wireless.

**Helpline:** 1-866-203-7571**

## Frequently Asked Questions (FAQ)

**Q: Does the HP DeskJet Plus 4152 require a 2.4 GHz network?**
A: The printer works best on 2.4 GHz for setup due to better range. It may also work on 5 GHz depending on your router, but if you run into trouble, switch to 2.4 GHz.

**Q: Can multiple computers and phones print to the DeskJet?**
A: Yes — as long as they are all on the same Wi-Fi network (or allowed to access the printer via network settings).

**Q: Do I need the HP Smart app?**
A: It’s highly recommended because it automates setup and provides cloud scanning and firmware updates. You can set up from Windows/Mac drivers too.

**Q: What if my network uses enterprise authentication?**
A: Home printers typically don’t support WPA2-Enterprise (802.1X). Use WPA2-PSK with a password or consult your network admin for alternatives.

**Q: Can I print remotely when away from home?**
A: Yes — use HP’s cloud printing features or services like HP Smart’s remote print options, but you must enable cloud services and sign in to an HP account.

**Helpline:** 1-866-203-7571**

## Final checklist — one-page quick setup

1. Turn on printer and router → ensure both are nearby.
2. Install HP Smart on phone/computer.
3. Open HP Smart → Add Printer → follow prompts.
4. If HP Smart fails → try WPS.
5. If WPS unavailable or fails → connect with USB and use HP software to transfer Wi-Fi credentials.
6. Print test page → verify connectivity.
7. Update firmware and set DHCP reservation if desired.
8. Keep the support number handy: **1-866-203-7571**.

**Helpline:** 1-866-203-7571**

## Conclusion

Connecting your HP DeskJet Plus 4152 to Wi-Fi is straightforward when you follow the right steps: prepare your network, use HP Smart for the easiest setup, try WPS for a one-button method, or temporarily use USB as a fallback. If you run into issues, follow the troubleshooting checklist above — most problems are resolved by restarting devices, re-entering the Wi-Fi password, or updating firmware. For persistent problems or guided help, contact support at **1-866-203-7571**.

If you want, I can also:

* Provide a **short printable quick-start sheet** (one page) with only the essential steps.
* Draft an **email or script** you can use when calling support with the key details (printer model, error lights, SSID, last successful action).
* Walk you through the process interactively step-by-step — tell me which device you’ll use (Android, iPhone, Windows, Mac) and I’ll give exact button presses and screenshots-friendly instructions.

Would you like that one-page quick-start sheet or the phone script now?
