Needs proper licensing and attribution. Needs CC images/icons.

odl-m6 Open Design Lamp with M6

• odl-m6 Open Design Lamp with M6
  • /ODL Softbox/
    • 01
    • 02
  • Component: base-plate from fluted PP
  • bulb holder (kit)
    • "raw" bulb holder (cap, insert and body)
    • shade ring
    • clamp nipple

© hmk
License: CC BY-SA

Adaptation of Lars Zimmermann's Open Design Lamps (ODL) with focus on

• M6 only
• part minimization
  • part types
  • part count
• scrap-materials and/or upcycling of materials (e.g., cardboard)

The vision is to document a set of standardized components (or modules) for lamps that can be freely combined in the best case:

• 🔗: This icon denotes the design of a complete lamp (consisting of components).
• 🔗: This icon denotes a component/module. For example, it could be
  • a base-plate
  • an arm
  • a screen
  • a screwed connection
• 🔗: This icon denotes a part, it could be
  • part of a kit (e.g., a screw from Eichhorn constructor)
  • a standard part that can be found in any home improvement store
  • a spare part

/ODL Softbox/

A lamp that can be used as a softbox for photography, but also works as (desk) lamp.

• Photos of LNDB 2021 exhibition: https://photos.app.goo.gl/KKa7ymgPGcAbGV4H7

01

• Photos: https://photos.app.goo.gl/QvqqUbrstwtS8TJK9

02

• Photos: https://photos.app.goo.gl/fXwAgtrvD2AcXoFu5

Component: base-plate from fluted PP

The base plate is cut and layered fluted PP (Polypropylene), a material that is typically used for bill-boards/advertising (A1 and A0 sizes). In Germany its popular for election posters (Wahlplakate).
This design also shows a complete lamp so that the overal look an be assessed more easily, but the focus here is on the base-plate.

• Photos: https://photos.app.goo.gl/Emg4Sdcy4EFffmXQA

bulb holder (kit)

🔗

"raw" bulb holder (cap, insert and body)

Lampenfassung

🔗
There are different kinds of outer threading: full, partial, none:

💡You may want full threading because this gives you the most flexibility.

shade ring

(Unter-)Ring

• threading: ?

clamp nipple

Klemmnippel, Zugentlastung, Kabelaufhängung

• threading: M10x1 (fine)

Not all kits come with this part. For some ODL designs/idioms it is mandatory.