# 1-866-203-7571 How to do Brother MFC-J1010DW Wireless Setup via Control Panel?

**Brother Printer Support at 1-866-203-7571**

The **Brother MFC-J1010DW** is one of the most affordable, compact, and feature-rich inkjet all-in-one printers designed for home and small-office use. It supports **wireless printing**, **mobile printing**, **cloud printing**, and **Wi-Fi Direct** for a cable-free printing experience.

However, to use these advanced wireless features, you must successfully **connect the Brother MFC-J1010DW to your Wi-Fi network**. A lot of users face difficulties while configuring Wi-Fi due to router settings, incorrect passwords, interference, or menu confusion.

This guide explains **how to set up Brother MFC-J1010DW wireless connection using the Control Panel**—step-by-step, clearly, and in a beginner-friendly format.

If at any point you need expert support, you can contact **Brother Printer Support at 1-866-203-7571**.

**Brother Printer Support at 1-866-203-7571**

# **Table of Contents**

1. Introduction
2. Requirements for Wi-Fi Setup
3. Accessing Network Settings on Printer
4. Wireless Setup Methods

* Method 1: Manual Wireless Setup Using Control Panel
* Method 2: WPS Push-Button Setup
* Method 3: WPS PIN Method
* Method 4: Wi-Fi Direct Setup
5. Install Drivers and Connect to Computer
6. Connect Brother MFC-J1010DW to Mobile Devices
7. Troubleshooting Wireless Setup
8. Advanced Wi-Fi Settings
9. Reset Network Settings
10. FAQs
11. Conclusion

**Brother Printer Support at 1-866-203-7571**

# **1. Introduction**

The **Brother MFC-J1010DW wireless setup via Control Panel** is a simple process, but if the right steps are not followed, the printer may not connect properly. Common connection errors include:

* Wrong Wi-Fi password
* Router out of range
* Incorrect security settings
* Weak signal
* Network interference
* Printer not in 2.4GHz mode
* Disabled WPS

This guide walks you through every method you can use directly from the Control Panel without needing a computer.

**Brother Printer Support at 1-866-203-7571**

# **2. Requirements for Wi-Fi Setup**

Before starting, make sure you have:

### ✔ A Wireless Router

Your router must support **2.4GHz Wi-Fi** (the Brother MFC-J1010DW does not support 5GHz).

### ✔ Network Name (SSID)

Example: *HomeWiFi_123*

### ✔ Network Password (Key)

Ensure that uppercase/lowercase match correctly.

### ✔ Printer Powered On

Startup should be completed before you enter wireless settings.

### ✔ Good Wi-Fi Range

Avoid thick walls, microwaves, cordless phones near the printer.

If you face problems, you can call **1-866-203-7571** for advanced support.

**Brother Printer Support at 1-866-203-7571**

# **3. Accessing Network Settings from Control Panel**

To begin the wireless setup, you must open the network menu.

### **Steps:**

1. Turn ON the Brother MFC-J1010DW printer.
2. Press the **Menu** or **Settings (Gear Icon)** button on the Control Panel.
3. Scroll using the **Up/Down Arrow**.
4. Select **Network** → press **OK**.
5. Choose **WLAN** → press **OK**.
6. Select **Setup Wizard** → press **OK**.

The printer will now search for available Wi-Fi networks.

If WLAN is OFF, the printer will ask:
**"Enable WLAN? → Yes"**

Press **OK**.

**Brother Printer Support at 1-866-203-7571**

# **4. Wireless Setup Methods**

Now let's go through each method in detail.

**Brother Printer Support at 1-866-203-7571**

# ✅ **Method 1: Manual Wireless Setup via Control Panel**

This is the most common method and works for all routers.

### **Step-by-Step Instructions:**

### **Step 1: Start Setup Wizard**

* Press **Menu → Network → WLAN → Setup Wizard**.
* Printer begins scanning for networks.

### **Step 2: Select Your Wi-Fi Network**

* A list of SSIDs (Wi-Fi names) appears.
* Use the arrows to highlight your Wi-Fi name.
* Press **OK**.

If your network is hidden, choose **<Other SSID>** and manually type your SSID.

### **Step 3: Enter Wi-Fi Password**

* Use Up/Down/Left/Right buttons to select characters.
* Press **OK** after entering the password.

Tips for typing:

* Use **“ABC”** and **“abc”** toggle button for uppercase/lowercase.
* Use numbers **0-9** directly.
* Press **Space** if needed.
* Press **Clear/Back** for mistakes.

### **Step 4: Confirm Settings**

Printer asks:

**"Apply Settings?" → Yes**

Select **Yes** and press **OK**.

### **Step 5: Connection in Progress**

* Printer displays **"Connecting…"**
* Within 10–20 seconds, it should show a success message.

### **Step 6: Connection Successful**

If connected, printer displays:

**"Connected"**
and prints a **Wireless Report**.

If the connection fails, you will see:

* Connection Failed
* Wrong Password
* Timeout
* No Access Point Found

(See troubleshooting section later.)

**Brother Printer Support at 1-866-203-7571**

# ✅ **Method 2: WPS Push-Button Setup**

This works when your router supports **WPS**.

### **Step 1: Enable WPS on Printer**

* Press **Menu → Network → WLAN → WPS/Pin Method → WPS**
* Press **OK**.

Printer displays:

**“Start WPS?”**

### **Step 2: Press Router WPS Button**

* Find the **WPS button** on your Wi-Fi router.
* Press and hold for **3–5 seconds**.

### **Step 3: Allow Printer to Connect**

* Printer automatically connects within 2 minutes.
* A confirmation message appears.

### **Advantages:**

* No password required
* Fastest method

If WPS fails, try another method or contact **1-866-203-7571**.

**Brother Printer Support at 1-866-203-7571**

# ✅ **Method 3: WPS PIN Method**

Some routers require a PIN instead of a button press.

### **Steps:**

1. Press **Menu → Network → WLAN → WPS/Pin Method → PIN**
2. Printer displays a **8-digit PIN**
3. Log into your router’s admin page
4. Enter the displayed printer PIN under **WPS PIN Setup**
5. Router completes the pairing automatically

After 1–2 minutes, the printer shows **Connected**.

**Brother Printer Support at 1-866-203-7571**

# ✅ **Method 4: Wi-Fi Direct Setup (Printer-to-Phone Connection)**

Wi-Fi Direct allows you to print without a router.

### **Step 1: Enable Wi-Fi Direct**

* Press **Menu → Network → Wi-Fi Direct → On**

Printer generates:

* Direct Network Name
* Direct Password

Example:

**DIRECT-MFC-J1010DW**
Password: 12345678

### **Step 2: Connect Phone to Printer**

* Open your phone Wi-Fi settings
* Select the DIRECT network
* Enter the password

Now you can print using:

* Brother Mobile Connect App
* AirPrint
* Mopria Print Service

**Brother Printer Support at 1-866-203-7571**

# **5. Install Drivers & Connect to Computer**

Once Wi-Fi setup is complete, install the appropriate drivers.

### **Option 1: Download from Brother Website**

Go to:
**brother-usa.com → Support → MFC-J1010DW**
Download **Full Driver & Software Package** for Windows or Mac.

### **Option 2: Installation From CD (if available)**

### **Option 3: Use Windows Automatic Add Printer**

Windows:

1. Go to **Settings → Bluetooth & Devices → Printers & Scanners**
2. Click **Add Device**
3. Select **Brother MFC-J1010DW**

Mac:

1. Go to **System Settings → Printers & Scanners**
2. Click **+**
3. Select your Brother printer

If your computer cannot find the printer, call **1-866-203-7571** for help.

**Brother Printer Support at 1-866-203-7571**

# **6. Connect Brother MFC-J1010DW to Mobile Devices**

## **iPhone / iPad (AirPrint)**

1. Connect iPhone to the same Wi-Fi as printer
2. Open the document
3. Tap **Share → Print → Select Printer**
4. Choose **Brother MFC-J1010DW**

## **Android Phones**

Download: **Brother Mobile Connect App**

Steps:

1. Open the app
2. Tap Add Printer
3. Choose **MFC-J1010DW**
4. Start printing

**Brother Printer Support at 1-866-203-7571**

# **7. Troubleshooting Brother MFC-J1010DW Wireless Setup Issues**

Below are the most common errors and solutions.

**Brother Printer Support at 1-866-203-7571**

# ❌ **Problem 1: Printer Not Finding Wi-Fi Network**

### ✔ Solutions:

* Move printer closer to the router
* Restart printer and router
* Ensure 2.4GHz Wi-Fi is ON
* Broadcast SSID (disable hidden mode)
* Disable MAC Filtering in router

**Brother Printer Support at 1-866-203-7571**

# ❌ **Problem 2: Wrong Password Error**

### ✔ Solutions:

* Re-enter the Wi-Fi key carefully
* Remove spaces or special characters
* Reset router Wi-Fi password if necessary

**Brother Printer Support at 1-866-203-7571**

# ❌ **Problem 3: Printer Keeps Disconnecting**

### ✔ Solutions:

* Assign a **static IP** in router
* Keep printer within 20–25 feet of router
* Update printer firmware
* Disable router’s auto-switch between 2.4GHz/5GHz

**Brother Printer Support at 1-866-203-7571**

# ❌ **Problem 4: Wi-Fi Light Blinking but Not Connecting**

### ✔ Solutions:

* Turn OFF VPN
* Disable firewall temporarily
* Enable WPA2 security instead of WPA3

**Brother Printer Support at 1-866-203-7571**

# ❌ **Problem 5: Wi-Fi Setup Wizard Fails**

If Setup Wizard fails repeatedly:

* Reset Network Settings
* Try WPS method
* Try Wi-Fi Direct
* Restart router

If still not working, call **1-866-203-7571**.

**Brother Printer Support at 1-866-203-7571**

# **8. Advanced Wi-Fi Settings**

If you are comfortable with router configuration, use these settings for best performance:

### ✔ Use WPA2 (AES)

### ✔ Disable TKIP

### ✔ Enable DHCP

### ✔ Keep 2.4GHz channel between 1–11

### ✔ Limit connected devices

### ✔ Avoid channel interference

These settings help stabilize wireless printing.

**Brother Printer Support at 1-866-203-7571**

# **9. Reset Network Settings**

Resetting the network clears old Wi-Fi data.

### **Steps:**

1. Press **Menu**
2. Select **Network**
3. Choose **Network Reset**
4. Press **OK**
5. Confirm **Yes**

Printer restarts and all network settings revert to default.

**Brother Printer Support at 1-866-203-7571**

# **10. Frequently Asked Questions**

### **Q1: How do I reconnect the Brother MFC-J1010DW to new Wi-Fi?**

Go to **Menu → Network → WLAN → Setup Wizard** and select the new network.

### **Q2: Can I use 5GHz Wi-Fi?**

No. The printer supports **2.4GHz only**.

### **Q3: How do I connect without password?**

Use **WPS Push-Button Method**.

### **Q4: Why is my printer not showing on computer?**

Check:

* Both devices on same Wi-Fi
* Install proper drivers
* Disable firewall temporarily

### **Q5: Can I print from phone without Wi-Fi router?**

Yes, use **Wi-Fi Direct**.

**Brother Printer Support at 1-866-203-7571**

# **11. Conclusion**

The **Brother MFC-J1010DW wireless setup via Control Panel** is simple when the steps are followed correctly. You can connect the printer using:

* Manual Wireless Setup
* WPS Push-Button
* WPS PIN
* Wi-Fi Direct

This guide covered everything from Wi-Fi configuration to mobile printing, troubleshooting, and advanced settings.

If you still face issues or need guided support, call **Brother Wireless Printer Support at 1-866-203-7571**.