# [phone] How to Resolve Canon Printer ‘B200’ Error Code

The Canon printer 'B200' error code is among the most frustrating issues Canon users encounter. It typically signifies a problem with the print head, a vital component responsible for spraying ink onto the paper. Whether you're a home user or managing a busy office, seeing this error can bring your printing tasks to a standstill. This comprehensive 3000-word guide will help you understand, diagnose, and fix the Canon B200 error, ensuring your printer returns to normal operation as quickly as possible. If you still need assistance after reading, contact Canon printer experts at **[phone]** (toll-free for USA).

## **Contents**

1. What Is the Canon B200 Error?
2. Causes of the Canon B200 Error Code
3. List of Canon Printer Models Affected
4. Pre-Fix Cautions Before Proceeding
5. Top 10 Solutions to Fix the Canon B200 Error
6. How to Maintain Your Canon Printer Post-Fix
7. When to Call for Professional Help
8. Conclusion and Support Information

## **1. What Is the Canon B200 Error?**

The Canon B200 error is a critical error message displayed on the printer's screen or computer. It’s commonly accompanied by blinking lights or a message like:
**“Support Code B200: Printer error has occurred.”**

### **What It Means:**

This code typically indicates that the **print head** is malfunctioning. The print head may be clogged, improperly installed, overheated, or damaged. In rare cases, it could also point to a deeper issue with the **logic board**.

## **2. Causes of the Canon B200 Error Code**

To resolve the issue effectively, it helps to understand what causes the error. Here are the most common reasons:

* **Clogged Print Head Nozzles**
* **Defective or Overheated Print Head**
* **Incorrect Cartridge Installation**
* **Using Non-Genuine Ink**
* **Printer Overuse Without Regular Maintenance**
* **Firmware or Software Glitches**
* **Electrical Short or Motherboard Issues**

## **3. List of Canon Printer Models Affected**

The B200 error is commonly found in these Canon models:

* **Canon Pixma MG Series** (MG5220, MG5320, MG6120, MG6220, MG8120, MG8220)
* **Canon MX Series** (MX870, MX882, MX922)
* **Canon MP Series** (MP560, MP620, MP640, MP980, MP990)
* **Canon iP Series** (iP3600, iP4700, iP4820, iP4950)

Even though the exact fix may vary slightly between models, the troubleshooting methods outlined below apply broadly across all affected models.

## **4. Pre-Fix Cautions Before Proceeding**

Before you jump into solving the error, take the following precautions:

* **Turn off the printer and unplug it from the power outlet.**
* **Let it sit for 10-15 minutes to cool down.**
* **Use gloves when handling cartridges or the print head.**
* **Prepare paper towels and distilled water for cleaning.**

If you're uncomfortable performing any of the steps, contact certified Canon printer support at **[phone]**.

## **5. Top 10 Solutions to Fix the Canon B200 Error**

### **Solution 1: Turn Off and Restart the Printer**

Sometimes, the B200 error is temporary.

**Steps:**

1. Turn off the printer completely.
2. Unplug it from the wall for at least 10 minutes.
3. Plug it back in and turn it on.
4. Try a test print.

If the error persists, move to the next solution.

### **Solution 2: Clean the Print Head Manually**

A clogged print head is a major cause of the B200 error.

**Steps:**

1. Open the printer cover and remove the ink cartridges.
2. Remove the print head carefully (refer to the printer’s manual).
3. Rinse the print head under warm, distilled water.
4. Let it soak in a bowl of warm distilled water for 10–15 minutes.
5. Gently dry it with a lint-free cloth.
6. Reinstall it once fully dry and power on the printer.

> *Caution:* Do not use alcohol or harsh chemicals to clean the print head.

### **Solution 3: Replace the Ink Cartridges**

Non-genuine or old cartridges can trigger the B200 error.

**Steps:**

1. Remove all ink cartridges.
2. Inspect for leaks, clogs, or outdated cartridges.
3. Replace them with new **genuine Canon cartridges**.
4. Reinstall and reboot the printer.

### **Solution 4: Perform a Deep Cleaning from Printer Settings**

Sometimes internal software-based cleaning can help clear blockages.

**Steps (Windows):**

1. Open **Control Panel > Devices and Printers**.
2. Right-click your Canon printer > **Printing Preferences**.
3. Go to **Maintenance > Deep Cleaning**.
4. Follow the on-screen instructions.

Repeat once or twice if necessary. This uses extra ink but may solve the error.

### **Solution 5: Reset the Printer Settings**

Resetting can eliminate firmware-related glitches.

**Steps:**

1. Power off the printer.
2. Press and hold the **Stop/Reset** button.
3. While holding, press and hold the **Power** button.
4. Keep holding Power and release Stop/Reset.
5. Press the Stop/Reset button **five times**, then release both buttons.
6. Wait for the printer to enter **service mode**, then power off and restart.

This resets internal errors and memory logs.

### **Solution 6: Remove and Reinsert the Print Head**

Sometimes a loose connection causes the B200 error.

**Steps:**

1. Power off and open the cover.
2. Carefully remove the cartridges and print head.
3. Wipe any excess ink or dust with a soft cloth.
4. Reseat the print head firmly into its cradle.
5. Reinsert the cartridges and close the lid.

### **Solution 7: Update the Printer Driver or Firmware**

Outdated drivers can lead to communication problems.

**Steps:**

1. Go to the official Canon website: [https://www.usa.canon.com](https://www.usa.canon.com)
2. Find your printer model.
3. Download and install the latest **drivers** and **firmware**.
4. Restart the printer and your PC.

### **Solution 8: Test with a Different Computer or USB Cable**

Sometimes the issue may lie with the connection.

**Steps:**

1. Connect the printer to a different USB port or use a different cable.
2. Alternatively, connect it to a different computer.
3. See if the error persists.

If it works on another device, your main computer may have corrupted drivers or software conflicts.

### **Solution 9: Run Printer in Maintenance Mode**

Some Canon printers allow maintenance tasks through a hidden mode.

**Steps:**

1. Turn off the printer.
2. Hold the **Resume/Cancel** button and press **Power**.
3. Release Resume and press it **4 times**.
4. Release all buttons.
5. A green light should appear. Use the Resume button to navigate to test patterns or cleaning functions.

Consult your printer manual for exact button combinations.

### **Solution 10: Replace the Print Head**

If all else fails, the print head may be beyond repair.

**Steps:**

1. Look up your Canon printer model’s compatible print head part number.
2. Order a new **genuine Canon print head**.
3. Replace it carefully following the printer’s service manual.
4. Power on and test the printer.

> *Note:* Print head replacements can be costly. If you're unsure, **call [phone]** for expert guidance.

## **6. How to Maintain Your Canon Printer Post-Fix**

Once you've resolved the B200 error, take steps to avoid future occurrences:

### **Tips:**

* Use **genuine Canon ink cartridges**.
* Print regularly to prevent ink from drying and clogging.
* Run monthly cleaning and nozzle checks.
* Avoid turning off the printer abruptly.
* Keep the printer in a dust-free, temperature-controlled environment.

## **7. When to Call for Professional Help**

If none of the solutions work or you're not confident handling hardware:

### **Contact Canon Printer Support: [phone] (Toll-Free USA)**

**They can help with:**

* Diagnosing hardware faults
* Arranging repairs or replacements
* Guiding you through technical steps
* Software issues and driver installations

## **8. Conclusion and Support Information**

The Canon B200 error can be alarming, but it’s not always fatal to your printer. In many cases, a simple cleaning or reset is enough to bring your device back to life. Always begin with the least invasive solutions before attempting complex procedures. If at any point you feel unsure, don’t hesitate to contact Canon-certified professionals for support.

**📞 For immediate help, call Canon Printer Support at [phone] (Toll-Free for USA).**
Available 24/7 for all your printer troubleshooting needs.