---
# System prepended metadata

title: 1-866-203-7571HowtofixHPprintererrorE11/11(CommunicationError)?

---

# 1-866-203-7571 How to fix HP printer error E11 / 11 (Communication Error)?

If you are facing **HP printer error E11 / 11**, it usually indicates a **communication error** between your HP printer and your computer or network. This error can appear on both **HP LaserJet** and **HP InkJet** series, affecting printing operations and causing frustration. Fortunately, this issue is often resolvable by following structured troubleshooting steps. In this guide, we will explain the causes, provide step-by-step solutions, and give preventive tips. If the issue persists, you can also contact HP support in the USA at **1-866-203-7571** for expert assistance.



## **Table of Contents**

1. Introduction to HP Printer Error E11 / 11
2. Causes of HP Printer Error E11
3. Preliminary Checks Before Troubleshooting
4. Step-by-Step Solutions

   * A. Check Printer Connections
   * B. Restart Devices
   * C. Verify Printer Drivers
   * D. Check Network Settings
   * E. Reset Printer to Factory Settings
   * F. Firmware Update
5. Advanced Solutions
6. Using HP Print and Scan Doctor
7. Preventive Tips to Avoid E11 / 11 Error
8. When to Contact HP Support
9. Conclusion



## **1. Introduction to HP Printer Error E11 / 11**

HP printer error **E11 / 11** is a communication error that occurs when the printer cannot properly communicate with your computer, network, or other devices. When this error occurs, printing stops, and your printer may display the error code on the control panel. Common scenarios include:

* Printer connected via **USB** but not recognized by the computer.
* Printer connected to a **network** (Wi-Fi/Ethernet) but failing to respond.
* Printer software or drivers are **outdated** or **corrupted**.

Understanding the cause of the error helps in applying the correct solution.



## **2. Causes of HP Printer Error E11**

Error E11 can be triggered by multiple factors:

1. **Loose or Damaged Cables** – Faulty USB or Ethernet cables can interrupt communication.
2. **Outdated or Corrupted Drivers** – Printer drivers ensure proper communication between printer and PC; outdated drivers may cause error.
3. **Network Issues** – Incorrect IP settings, weak Wi-Fi, or firewall restrictions can disrupt communication.
4. **Firmware Issues** – Older firmware versions may contain bugs causing E11 errors.
5. **Third-Party Software Conflicts** – Antivirus programs or firewalls may block printer communication.
6. **Hardware Failure** – Rarely, a damaged printer port or motherboard could trigger E11.



## **3. Preliminary Checks Before Troubleshooting**

Before starting advanced fixes, perform these basic checks:

1. **Power Supply Check** – Ensure the printer is properly powered on. Avoid using surge protectors that may limit power.
2. **Cable Check** – Inspect USB/Ethernet cables for visible damage. Replace if necessary.
3. **Computer Restart** – Restart the computer to clear temporary glitches.
4. **Printer Status** – Ensure the printer is online and has no other errors such as paper jams or low ink alerts.



## **4. Step-by-Step Solutions**

Here are comprehensive steps to resolve HP printer E11 / 11 error.



### **A. Check Printer Connections**

1. **USB Connection**

   * Turn off both the printer and computer.
   * Disconnect the USB cable and inspect it for damage.
   * Reconnect the cable to a different USB port.
   * Turn on the printer and computer.

2. **Network Connection (Wi-Fi / Ethernet)**

   * Ensure the printer is connected to the same network as your computer.
   * For Wi-Fi, print a network configuration page from the printer. Check the **IP address**.
   * Ping the printer IP from your computer to verify connectivity.



### **B. Restart Devices**

Restarting the devices can often resolve communication glitches.

1. Turn off the printer.
2. Shut down your computer.
3. Disconnect the printer from the power source for 1-2 minutes.
4. Restart the computer and then the printer.
5. Try printing a test page.



### **C. Verify Printer Drivers**

Printer drivers mediate communication between your computer and printer. Outdated or corrupt drivers may trigger error E11.

**Steps to Update Drivers:**

1. Go to **HP Support Website**: [https://support.hp.com](https://support.hp.com)
2. Enter your printer model and select **Drivers & Downloads**.
3. Download the latest driver compatible with your operating system.
4. Install the driver following on-screen instructions.
5. Restart the computer and printer.



### **D. Check Network Settings**

For network printers, misconfigured settings can prevent communication:

1. **IP Address Conflict**

   * Assign a static IP to your printer using the printer control panel or router settings.
2. **Firewall / Antivirus Interference**

   * Temporarily disable firewall or antivirus.
   * Try printing; if successful, configure firewall to allow printer traffic.
3. **Router Issues**

   * Restart the router.
   * Ensure **2.4 GHz / 5 GHz** bands match your printer compatibility.



### **E. Reset Printer to Factory Settings**

Resetting the printer can clear communication issues:

1. Locate the **Reset** option in the printer menu.
2. Select **Restore Factory Defaults**.
3. Reconnect the printer to your computer or network.
4. Reinstall the drivers if necessary.



### **F. Firmware Update**

Firmware updates fix bugs and improve communication stability:

1. Check the current firmware version on the printer display.
2. Visit [HP Firmware Update](https://support.hp.com) for your model.
3. Download and install the latest firmware.
4. Restart the printer.



## **5. Advanced Solutions**

If basic troubleshooting does not fix error E11:

1. **Try a Different Computer** – Connect the printer to another computer to isolate the issue.
2. **Replace Cables** – Even slightly damaged USB or Ethernet cables can cause errors.
3. **Check for Hardware Damage** – Inspect the printer port and motherboard; consult HP support if needed.



## **6. Using HP Print and Scan Doctor**

HP provides a free tool to diagnose communication issues:

1. Download **HP Print and Scan Doctor** from HP website.
2. Run the program and select your printer.
3. Follow on-screen prompts to detect and fix issues automatically.



## **7. Preventive Tips to Avoid E11 / 11 Error**

1. Always keep **printer drivers and firmware updated**.
2. Use **high-quality cables** for USB/Ethernet connections.
3. Avoid sudden **power cuts**; use a UPS for stability.
4. Regularly clean **printer ports** and remove dust.
5. Avoid frequent **network changes** for Wi-Fi printers.



## **8. When to Contact HP Support**

If the error persists despite all troubleshooting, contact **HP support USA at 1-866-203-7571**. Provide the following details for faster resolution:

* Printer model and serial number
* Exact error code (E11 / 11)
* Steps already tried
* Operating system version

HP technicians can guide you through advanced fixes or arrange for repair/replacement if necessary.



## **9. Conclusion**

HP printer error E11 / 11 (Communication Error) is usually caused by connectivity, driver, or network issues. By systematically checking connections, updating drivers and firmware, and using tools like HP Print and Scan Doctor, most users can resolve the error. Preventive maintenance and proper setup will minimize recurrence. For persistent issues, HP support at **1-866-203-7571** provides expert assistance.

**Note:** Always ensure your computer and printer software are compatible with your operating system. Communication errors often stem from outdated or mismatched drivers, which can be resolved through updates or reinstallation.



