# [phone] HPLaserJetSeriesPrinterSkipping Pages?HowtoFixIt

HP LaserJet series printers are renowned for their speed, precision, and reliability. However, even top-tier devices can face technical glitches, and one common issue users encounter is the **printer skipping pages** during a print job. This can be frustrating, especially when you're in the middle of printing critical documents.

If your **HP LaserJet printer is skipping pages**, this guide will walk you through all the potential reasons and step-by-step solutions to get your printer functioning correctly again. Whether it’s hardware issues, outdated drivers, or incorrect printer settings, we've got you covered.

## **Table of Contents**

1. Introduction
2. Common Symptoms of Skipping Pages
3. Causes of HP LaserJet Skipping Pages
4. How to Fix HP LaserJet Skipping Pages (Step-by-Step)
5. Advanced Troubleshooting for IT Professionals
6. Preventive Tips to Avoid Skipping Pages
7. When to Contact HP Printer Support
8. Call [phone] for Expert HP Printer Assistance (USA)
9. Conclusion

## **1. Introduction**

Printing issues are common across all brands of printers, but when an **HP LaserJet printer skips pages**, it typically indicates a deeper issue that needs to be addressed immediately. This issue may cause wasted paper, incomplete documents, misaligned formatting, or missed deadlines.

**Skipping pages** means the printer starts a job but leaves some pages blank or entirely unprinted without obvious error messages.

## **2. Common Symptoms of Skipping Pages**

Here are some typical signs that your HP LaserJet printer is skipping pages:

* Blank pages printed between correct pages
* Odd-numbered pages print, but even-numbered don’t (or vice versa)
* Missing text/images on alternate pages
* Printer finishes a job faster than it should
* Jobs seem complete, but the document is incomplete
* Only the first or last page prints

These symptoms can vary based on the **printer model**, paper tray configuration, driver version, and connection type.

## **3. Causes of HP LaserJet Skipping Pages**

Before diving into the solution, it's important to understand what may be causing the issue. Common causes include:

### a) **Incorrect Printer Driver**

Outdated or incompatible drivers may prevent the printer from communicating properly with your computer.

### b) **Print Settings Misconfigured**

Issues like selecting "Odd Pages Only" or incorrect duplex settings may result in skipped pages.

### c) **Firmware Issues**

Older firmware may cause data transmission errors that lead to skipped pages.

### d) **Corrupted Document**

Some PDF or DOC files may have formatting issues, which can confuse the printer.

### e) **Low or Failing Toner Cartridge**

A low or defective cartridge can lead to blank or faded pages.

### f) **Paper Feed Issues**

Paper not being picked up properly can result in skipped output.

### g) **Faulty USB or Network Connection**

Interruptions in connectivity can lead to incomplete jobs.

## **4. How to Fix HP LaserJet Skipping Pages (Step-by-Step)**

Here are the most effective steps to troubleshoot and resolve the skipping pages issue.

### **Step 1: Restart Your Printer and Computer**

* Power off the HP LaserJet printer.
* Turn off your computer as well.
* Disconnect power cable from the printer for 2 minutes.
* Restart both devices.
* Retry printing a known good document.

This resets memory and temporary errors that could be affecting print jobs.

### **Step 2: Check for Paper Jams or Feed Issues**

* Open all paper trays and inspect them.
* Remove any crumpled or jammed paper.
* Make sure the paper is not wet, curled, or misaligned.
* Adjust the paper guides properly.

**TIP**: Use only recommended paper weight and size for HP LaserJet models.

### **Step 3: Reinstall or Update Printer Drivers**

* Go to **[https://support.hp.com](https://support.hp.com)**
* Download the latest driver for your HP LaserJet model.
* Remove the existing printer driver:

* Open *Control Panel > Devices and Printers*
* Right-click the printer > *Remove device*
* Reinstall using the freshly downloaded driver.

Outdated or corrupted drivers are a **major cause** of skipping and other erratic behavior.

### **Step 4: Check Print Settings**

* Go to *Control Panel > Devices and Printers*
* Right-click on your HP printer > *Printing Preferences*
* Make sure the following are correctly configured:

* **Pages to Print**: Set to *All* (not just Odd or Even)
* **Duplex Printing**: Disable if not in use
* **Print Quality**: Set to default

### **Step 5: Test with Another Document or App**

Try printing a test document from another application:

* If you're printing from MS Word, try Notepad or PDF reader.
* If Notepad prints correctly, the issue may be with the original file.

Also test with a different file type to isolate whether the problem is document-specific.

### **Step 6: Update Firmware**

Many HP LaserJet models support firmware updates:

* Open the **HP Smart app** or go to the **HP support website**
* Search your model
* Download and install the latest firmware update
* Restart the printer

Firmware fixes known bugs including skipped or incomplete page printing.

### **Step 7: Replace Toner Cartridge**

If pages come out **completely blank** or only **partially printed**, your toner may be at fault.

* Try printing a **Supply Status Page** via the printer’s LCD panel.
* If toner is low or empty, replace the cartridge.
* Use **genuine HP toner** for best results.

### **Step 8: Check Cable or Wireless Connection**

* If using USB, try a different cable or USB port
* If using Wi-Fi, move printer closer to router
* Run a **wireless network test report** from printer’s control panel
* Reconnect the printer to the network if needed

Connectivity interruptions may result in partial print jobs.

### **Step 9: Print a Test Page from Printer Panel**

This helps determine whether the issue is with the printer or the PC:

* On the printer’s display screen, navigate to:
*Setup > Reports > Configuration Page* or *Demo Page*

If it prints fine, the issue is likely with software or driver—not hardware.

### **Step 10: Reset Printer to Factory Defaults**

Use this step only if nothing else works:

* Access *Setup > Restore Defaults* from control panel
* The printer will reboot and reset all settings
* Reconnect to your PC and network

**Caution**: This will erase all custom settings.

## **5. Advanced Troubleshooting for IT Professionals**

If you manage printers in a business environment, consider these:

* **Print Spooler Service**: Restart the Print Spooler service on Windows

* `services.msc > Print Spooler > Restart`
* **GPO Conflicts**: Group Policies may enforce conflicting print settings
* **Driver Isolation Mode**: Test in isolated driver mode to detect incompatibility
* **Event Viewer**: Check Windows Event Viewer for spooler or USB error logs
* **Print Management Console**: Use MMC console for centralized diagnosis

## **6. Preventive Tips to Avoid Skipping Pages**

1. **Regularly update drivers and firmware**
2. **Use high-quality toner and paper**
3. **Avoid using pirated software or third-party print tools**
4. **Periodically clean and inspect your printer**
5. **Run monthly test prints**
6. **Don't overload the print queue**
7. **Use surge protectors to avoid voltage fluctuations**

## **7. When to Contact HP Printer Support**

You should call an expert if:

* The issue persists after all troubleshooting
* Your printer is under warranty
* Internal hardware failure is suspected
* You need help updating firmware or drivers
* You require remote assistance

## **8. Call Toll-Free [phone] for Expert HP Printer Support (USA)**

Still facing problems with your HP LaserJet printer skipping pages? Our expert technicians are ready to help.

📞 **Call HP Printer Support: [phone] (Toll-Free USA)**
🕒 **Available: 24/7 for Technical Support and Troubleshooting**

We offer assistance with:

* Remote diagnostics
* Driver and software support
* Hardware troubleshooting
* Firmware updates
* Error code interpretation
* Configuration for Windows, macOS, and network environments

Whether you're using **HP LaserJet Pro, MFP, Enterprise, or DeskJet**, we can guide you step-by-step and get your device back to optimal functionality.

## **9. Conclusion**

Dealing with **HP LaserJet printers skipping pages** can be annoying, but it’s usually fixable with systematic troubleshooting. Whether it’s a driver issue, connectivity hiccup, or a low toner cartridge, identifying the root cause is key.

From restarting your devices to updating drivers and inspecting the toner, this guide covered everything you need to resolve the issue. For persistent problems, the best course of action is to reach out to professional support.

✅ Don’t let printer issues interrupt your workflow.
📞 **Call [phone] for Fast, Friendly, and Reliable HP Printer Support (USA).**