雜物區

@garbage

就是放雜物

Public team

Community (0)
No community contribution yet

Joined on May 7, 2020

  • 草稿整理 Build Direction Effects on Additively Manufactured Channels Snyder, J. C., Stimpson, C. K., Thole, K. A., and Mongillo, D. (January 20, 2016). "Build Direction Effects on Additively Manufactured Channels." ASME. J. Turbomach. May 2016; 138(5): 051006. https://doi.org/10.1115/1.4032168 Abstract 隨著直接金屬激光燒結 (DMLS)(通常也稱為增材製造 (AM))的進步,用於燃氣輪機冷卻的內部通道的新穎幾何特徵可以超越使用傳統製造技術的這些特徵。 然而,在 DMLS 過程中有許多變量會影響零件的最終質量。 燃氣輪機傳熱設計人員最感興趣的是內部通道可以保持的==粗糙度水平(roughness level)== 和 ==公差水平(tolerance levels)==。本研究調查了 DMLS 構建方向和通道形狀對小型通道的壓力損失和傳熱測量的影響。 結果表明,具有不同通道形狀和構建方向的測試案例之間會出現壓力損失差異,而==傳熱性能幾乎沒有變化==。 the goal of this study is to evaluate the effect of DMLS build direction on the pressure loss and heat transfer performance of small (mini) channels.
     Like  Bookmark
  • 0611025 郭庭均 金屬切削加工(metal machining) 金屬製品的的製造過程大致分為兩類,第一類是作為成型製造的鑄造、鍛造、焊接等等,而另一種則是加工製造,包含切削、磨削等。而金屬切削加工至今仍是最為基礎且重要的基本工藝之一。 金屬切削的種類繁多,有車削(Turning)、鉋切(Planing)、銑切(Milling)、鑽孔(Drilling)等等,其中切削理論的顧名思義就是將工件中多餘的金屬屑片(Chips)切除,使工件成為適當的尺寸與形狀。其中,切削工具的性能可以直接影響到切削加工的品質與生產效率。 切削顫振(chatter)的產生 切銷顫振的產生即是源於刀具的震動而引起的加工不穩定現象,會使得工件表面留下顫振的刀痕。如果刀具再次經過這些顫振刀痕,就會由於工件的不平整引起更大的震動,導致刀具造成更深的刀痕,惡性循環。如果工件的表面的粗糙度較大,可能會加速刀具磨耗,最終可能導致工件或刀具的損壞。 ▲ 顫振(參考連結)
     Like  Bookmark
  • 材料的介紹 麻田散鐵型不鏽鋼 定義 Cr11 ~ 13.5% 特質 含碳量極高,具耐磨性 高強度、硬度高
     Like  Bookmark
  • Abstract 由於重力作用在laser sintering process過程中產上的熔體區域上,上方與下方的增材表面已顯示出不同的粗糙度特徵。 laser sintering process 1、2: scaled, structured-light scans of the upskin and downskin surfaces of an Inconel 718 component which was created at a 45° angle to the printing surface. [1] 3: similar to the Inconel 718 downskin surface, but a different scaling was used to provide larger roughness elements in the RIFT Roughness dimensions($R_q/D_h$) 0.0064(小)
     Like  Bookmark
  • Ch1 Introduction to Heat Transfer Introduction Energy can be transferred by interaction of a system with its surrounding, these interaction are called work and heat. Thermodynamics deals with the end states of the thermal interaction process, but provides no information concerning the nature of the interaction and the time rate at which it occurs. How much heat is transferred? How much work is done? Final/equilibrium staste of the system.
     Like  Bookmark
  • 0611025 郭庭均 實驗記錄 紅光二極體雷射波長理論值: $\lambda = 630 \ \text{(nm)}$ 雙狹縫干涉 $D$: 屏幕至雙狹縫模組的垂直距離,$y_m$: 第$m$條亮紋或暗紋至中央亮紋距離 雙狹縫間距$d=5\times10^{-4} \ \text{(m)}$,$D=0.8 \text{(m)}$
     Like  Bookmark
  • Rolling 經由一組Rolls以壓縮力將工件的厚度減小或改變截面積,稱為滾軋。期間會刷掉氧化層。之後把做好的鋼片捲起來,此步驟稱為盤圓。 分為flat-rolling, shape rolling, ring rolling等多種,而以flat-rolling使用最廣。 flat-rolling 以減小厚度為主要目的,常和「連續鑄造方法併用」(會再切一段一段) 機器噴水是為了保護滾輪,一滾輪和一滾輪間有張力調節輪,為了調整鋼片傳送速度。 前面為熱滾軋,但熱滾不會將鋼片壓到最薄,陰晦又熱漲冷縮的現象;因此熱滾軋之後會有冷滾軋,此時才會將鋼片壓到想要的厚度。熱滾和冷滾間的步驟為酸洗,洗去氧化層。 可製造plates板厚度≥6mm,sheets,sheets<6mm在熱軋製時(溫度超過再結晶溫度),會因加工與再結晶,產生細晶粒之wrought structure。
     Like  Bookmark
  • Chapter 9: Phase Diagrams Issues to address resulting equilibrium state when combining two elements specify composition(%數)、temperature(T),then how many phases form? what is the composition of each phase? what is the amount of each phase?
     Like  Bookmark