---
# System prepended metadata

title: How to Repair a Garage Door Easily?

---

# How to Repair a Garage Door Easily?

**Summary**

There exist two major components while considering a garage door, firstly the opener, and then the door itself. Are you ready to explore more about it? This article will talk about how to go with the repair work while considering a garage door itself. One can easily repair a garage door by following the steps provided hereafter in the article; just remember to not injure yourself by a spring or whatsoever.

Overhead garage doors work on spring tension, whether they swing up in a single piece, or roll up in different sections. The door is moved on the metal tracks present on the garage walls to which power is provided by springs or heavy springs.

![](https://i.imgur.com/yqszp7h.jpg)


**What Are Some Helpful Tips To Follow?**

Some helpful tips to carry out **[Fast Garage Door Repair in Riverside](https://garagedoorshero.com/)** are:

• Check the metal tracks that are present inside the garage, followed by taking a look at the mounting brackets that are responsible for holding the tracks with the walls. If you find them loose, tighten the screws or bolts present at the brackets. While working in the garage with a closed garage door, examine the tracks for any flat spots, dents, or crimps. If there are exists any spots that are damaged, use a rubber mallet to pound them. You can also use a block of wood and a hammer to do the same. In case the tracks are adversely damaged, prefer to replace them.

• With a level, check the tracks to ensure they are aligned correctly. Horizontal tracks should be slightly slanted down towards the garage. The vertical sections, with roll-up doors, of the track should be plumb exactly. Make sure that both the tracks are at the same height on the garage walls. If improper alignment, do not remove but loose the bolts or screws holding the mounting brackets and then carefully tap the tracks back into the correct position. Use the level to recheck the tracks, tighten them.

• Remove hardened grease and dirt to clean the tracks with the help of a concentrated household cleaner. Thoroughly clean the rollers, and wipe them dry along with the tracks.

• Tighten the loose hardware, if any. Check the plates on swing-up doors where the spring is known to be mounted to ensure that all the screws are tight; tighten if they are not. Check the hinges on a roll-up door holding the various sections of the door. Tighten all the loose screws and replace any damaged hinges that. Service the hinges to correct sagging at either side of the door. In the case of an enlarged screw hole, replace the screws with screws of the same diameter but longer.

•	If a roll-up door, at the center of it, possesses only a single torsion spring, do not ever try to fix it. The tension could be so high that the spring might end up injuring you. For any doors with such a spring, prefer calling a professionally-efficient repair service instead.

In most situations when the door fails to work, repairs can be simple to perform. **[Garage Door Repair in Riverside](https://garagedoorshero.com/riverside)** was never this effective. Repair your garage doors now without any difficulties. Do let us know about your experience.
