= List of IAD2 hardware moved to RDU3 and ready to be resetup

* reset admin password to the new one
* Do any configuration we normally did for new hardware. Note that we can't just use the existing xml template probibly because these are various hardware types, not all the same as the new rdu3 hardware is. This would include power balancing, email alerts, host/domain name, etc
* We may need additional kickstarts as some of these have different amounts of disks, etc.
* Finally add them to ansible and provision them.

I've already added their mgmt to dhp. I've already added them in dns.

Todo:

serial / mgmt mac / old use / type / cpu/memory / new use

3ZGTRT3 - c8:4b:d6:8a:59:6a - bvmhost-x86-02.stg - R650 - 112/256 - buildhw-x86-05
2ZGTRT3 - c8:4b:d6:8a:69:a2 - vmhost-x86-09.stg - R650 - 112/256 - buildhw-x86-06
617DRT3 - c8:4b:d6:8a:4a:a0 - autosign02 - R650 - 64/128 - buildhw-x86-07
780483A - 08:94:ef:81:30:86 - bvmhost-p09-01.stg - p09 - bvmhost-p09-01.stg

These 4 should be good to install now:
C922FZ3 - - new-sign-vault01 - R450 - 48/64 - buildhw-x86-17
F922FZ3 - b4:45:06:fb:84:28 - bkernel01 - R450 - 48/64 - buildhw-x86-14
D922FZ3 - b4:45:06:fb:83:48 - bkernel02 - r450 - 48/64 - buildhw-x86-15
G922FZ3 - b4:45:06:fb:8b:38 - sign-vault02 - r450 - 48/64 - buildhw-x86-16 (greg - firmaware updated, bios set correctly, but all links down [via ip addr], cannot PXE)
1S5FK93 - 70:b5:e8:e6:1f:2c - workerx.ocp - r6525 - 32/128 - buildhw-x86-11 (incorrect mac in DHCP, leave til after freeze)

Still tbd:

F8J5FZ3 - c8:4b:d6:a6:d0:d9 - worker04.ocp - r650 - 128/256 - openqa? 06
G8J5FZ3 - c8:4b:d6:a6:de:89 - worker05.ocp - r650 - 128/256 - openqa? 07
CPQCN34 - a8:3c:a5:42:20:72 - bvmhost-x86-riscv01 - r650 - 128/256 - openqa? 08
C61SW04 - a8:3c:a5:37:a8:ec - vmhost-x86-08 - r650 - 128/256 - openqa? 09 - repurposing to be vmhost-x86-iso01
B61SW04 - a8:3c:a5:37:a6:9a - vmhost-x86-01.stg - r650 - 128/256 - openqa? 10 - repurposing to be bvmhost-x86-riscv02

done or not doing:

- [x] 220501265 - D8:5E:D3:8B:89:6E - ? - Oa64 - 80/384 - buildhw-a64-03
- [x] 220501266 - D8:5E:D3:8B:5D:DA - ? - Oa64 - 80/384 - buildhw-a64-04
- [x] 220501267 - D8:5E:D3:8B:5F:72 - ? - Oa64 - 80/384 - buildhw-a64-05
- [x] 220501268 - D8:5E:D3:8B:5F:3A - ? - Oa64 - 80/384 - buildhw-a64-06
- [x] 220501269 - D8:5E:D3:8B:73:D8 - ? - Oa64 - 80/384 - buildhw-a64-07
- [X] 231001326 - D8:5E:D3:8B:5C:C6 - ? - Ma64 - 128/384 - bvmhost-a64-05
- [X] F76HC14 - a8:3c:a5:36:98:60 - kernel02 - kernel02
- [X] 780484A - 08:94:ef:81:30:46 - bvmhost-p09-05 - p09 - bvmhost-p09-05
- [X] 130C7AA - ac:1f:6b:5c:03:9d - old power9 prod - p09 - n/a
- [X] 130FV3A - ac:1f:6b:5c:03:f9 - old power9 prod - p09 - n/a
- [X] 130PK7A - ac:1f:6b:5c:6b:92 - bvmhost-p09-01 - p09 - n/a
- [x] 231001325 - D8:5E:D3:81:2B:26 - ? - Ma64 - 128/384 - openqa-a64-worker03
- [x] 231001327 - D8:5E:D3:8B:5D:2A - ? Ma64 - 128/384 - openqa-a64-worker04
- [x] 1S4DK93 - 70:b5:e8:ed:2a:a4 - worker03.stg - r6525 - ? /128 - buildhw-x86-08 (greg)
- [x] 1S4GK93 - 70:b5:e8:ed:27:e0 - workerx.ocp - r6525 - 32/128 - buildhw-x86-09 (greg)
- [x] 1S5DK93 - 70:b5:e8:ed:31:16 - workerx.ocp - r6525 - 32/128 - buildhw-x86-10 (greg)
- [x] 1S4FK93 - 70:b5:e8:ed:31:0a - workerx.stg - r6525 - 32/128 - buildhw-x86-12 (greg)
- [x] 1S5CK93 - 70:b5:e8:ed:26:78 - worker01.stg - r6525 - 32/128 - buildhw-x86-13 (greg)
- [x] 231001328 - D8:5E:D3:8B:5B:BE - ? Ma64 - 128/384 - openqa-a64-worker05
- [x] 231001329 - D8:5E:D3:8B:5D:4A - bvmhost-a64-01.stg - Ma64 - 128/384 - openqa-a64-worker06

configuration notes (greg)
- update admin pw
- firmware / bios / etc
- For R6625
- iDRAC-with-Lifecycle-Controller_Firmware_FGR4H_WN64_7.20.30.55_A00.EXE
- BIOS_NTCJ8_WN64_2.19.0.EXE
- CPLD_Firmware_4NMC7_WN64_1.2.0_A00.EXE
- Network_Firmware_DC20J_WN64_24.0.5_A00.EXE (X710 NIC update)
- SAS-RAID_Firmware_96M5G_WN64_51.16.0-5150_A17.EXE (PERC 745 update)
- raid config
- delete virtual disks
- set controller to Enhanced HBA (converts all disks to non-raid on boot)
- configuration > power management
- check "a/b grid redundant" and "host spare: disabled"
- idrac settings
- connectivity
- common
- disable register DNS
- set idrac name
- disable auto domain
- set domain
- connection / topology / discovery enabled
- services
- web server
- http/2 - enable
- tls 1.3 only
- settings
- ntp
- timezone UTC
- ntp servers 10.16.163.31/2
- smtp
- server: 10.16.163.31
- sender: [e-mail]
- prefix: [RDU3 iDRAC alert]
- encryption: none
- system settings
- smtp email - enabled, [e-mail]

- fedora 42 8disk install