---
# System prepended metadata

title: A Comprehensive Guide on Installing Carbon Fiber Veneer on Your Car's Steering Wheel

---

# A Comprehensive Guide on Installing Carbon Fiber Veneer on Your Car's Steering Wheel

**Summary:**

**Carbon fiber veneer has become a popular material for car modification enthusiasts due to its lightweight and stylish look. Installing carbon fiber veneer on your car's steering wheel can enhance its appearance and make it stand out on the road. This article provides a step-by-step guide on how to install carbon fiber veneer on your car's steering wheel, including the necessary tools and materials.**

Steering wheel modification is a common practice among car enthusiasts, and one of the most popular modifications is installing **[carbon fiber veneer](https://www.exoticcargear.com/)**. Carbon fiber veneer is a thin layer of carbon fiber that can be applied to the surface of the steering wheel to give it a unique look. This modification is not only easy to install but also affordable and can be done at home with the right tools and materials.

**Materials Required:**

![](https://i.imgur.com/UJzCL0P.jpg)

•	Carbon fiber veneer
•	Heat gun
•	Razor blade
•	Scissors
•	Squeegee
•	Isopropyl alcohol
•	Cleaning cloth

**Step-by-Step Guide:**

**Step 1:** Clean the Steering Wheel Before installing carbon fiber veneer, it is essential to ensure that the steering wheel is clean and free from any dust or dirt. Use a cleaning cloth and isopropyl alcohol to wipe down the steering wheel surface thoroughly.

**Step 2:** Measure the Steering Wheel Measure the steering wheel's diameter and cut the carbon fiber veneer sheet to size using scissors.

**Step 3:** Apply the Veneer Peel off the backing from the carbon fiber veneer and apply it to the steering wheel surface. Use a squeegee to smooth out any air bubbles and ensure that the veneer adheres evenly to the surface.

**Step 4:** Heat the Veneer Using a heat gun, apply heat to the carbon fiber veneer surface to activate the adhesive and ensure that the veneer conforms to the steering wheel's curves and contours. Be careful not to overheat the veneer or burn it.

**Step 5:** Trim the Excess Veneer Using a razor blade, trim any excess carbon fiber veneer from the edges of the steering wheel. Take your time and ensure that you make clean and precise cuts.

**Step 6:** Finishing Touches Once you have trimmed the excess veneer, use a squeegee to smooth out any remaining air bubbles and ensure that the veneer adheres firmly to the surface. Wipe down the steering wheel surface with a cleaning cloth to remove any dust or debris.

**Conclusion:**

**[Installing carbon fiber veneer](https://www.exoticcargear.com/contact-us/)** on your car's steering wheel can be a simple and affordable way to give your car a stylish and unique look. With the right tools and materials, this modification can be done at home without the need for professional help. By following the step-by-step guide outlined in this article, you can install carbon fiber veneer on your car's steering wheel and enjoy a customized driving experience.

You can also take help from a professional for this but you should ensure the provider has experience in putting carbon fiber veneer on car’s steering wheel. You can follow the above steps and do it yourself as well but if you want to avoid the hassle then it is better to reach out to a professional.
