# 1-866-203-7571 Epson L3110 Black Ink Not Printing [Fixed]
**Epson Printer Support: 1-866-203-7571**
Is your **Epson EcoTank L3110** not printing black ink even though the tank is full? You’re not alone. Many users face this issue where the printer prints colors perfectly but skips black, prints faded text, or produces blank pages.
This comprehensive guide will walk you through **step-by-step solutions** to fix the Epson L3110 black ink not printing issue quickly and effectively.
For instant help, you can also call **1-866-203-7571** for expert printer support.
**Epson Printer Support: 1-866-203-7571**
## Why Is Epson L3110 Not Printing Black Ink?
Before jumping into fixes, it’s important to understand the possible causes:
* Clogged black printhead nozzles
* Air bubbles in black ink line
* Low or dried black ink
* Driver corruption
* Incorrect print settings
* Firmware glitch
* Paper type mismatch
* Waste ink pad issue
Most of the time, the issue is related to **printhead clogging**.
**Epson Printer Support: 1-866-203-7571**
# Solution 1: Check Ink Levels Properly
Even if the tank appears full, verify:
1. Open the printer cover.
2. Check the black ink tank physically.
3. Make sure ink is above the minimum line.
4. Ensure you are using genuine Epson ink.
Using low-quality or third-party ink can cause clogs in the **Epson EcoTank L3110**.
If ink is low:
* Refill the tank carefully.
* Do not overfill.
* Close the cap tightly.
**Epson Printer Support: 1-866-203-7571**
# Solution 2: Run Nozzle Check
This is the most important diagnostic step.
### How to Run Nozzle Check (Windows):
1. Open Control Panel.
2. Go to Devices and Printers.
3. Right-click Epson L3110.
4. Select Printing Preferences.
5. Click Maintenance tab.
6. Select Nozzle Check.
7. Print test page.
### On Mac:
1. Open System Settings.
2. Printers & Scanners.
3. Select Epson L3110.
4. Click Options & Supplies.
5. Maintenance.
6. Run Nozzle Check.
If black lines are missing or broken, it confirms **printhead clogging**.
**Epson Printer Support: 1-866-203-7571**
# Solution 3: Perform Printhead Cleaning
If nozzle check shows broken black lines:
### Steps:
1. Go to Maintenance tab.
2. Click Head Cleaning.
3. Select Black ink.
4. Start cleaning.
Wait for completion (about 2–3 minutes).
After cleaning:
* Run another Nozzle Check.
* Repeat up to 3 times if necessary.
⚠️ Do not run head cleaning more than 3 times continuously — it wastes ink and may overheat the printer.
**Epson Printer Support: 1-866-203-7571**
# Solution 4: Perform Power Cleaning (Deep Cleaning)
If normal cleaning fails:
1. Go to Maintenance.
2. Select Power Cleaning.
3. Follow instructions.
4. Wait 10–15 minutes.
Power cleaning pushes ink forcefully to clear blockages.
After completion:
* Let printer rest for 30 minutes.
* Run nozzle check again.
**Epson Printer Support: 1-866-203-7571**
# Solution 5: Check Print Settings
Sometimes black ink won’t print due to wrong settings.
### Fix Settings:
1. Open Print dialog.
2. Go to Preferences.
3. Make sure:
* Color mode is NOT set to “Color Only”
* Grayscale is selected if printing black text
* Paper type is correct
Incorrect settings may cause the **Epson** printer to avoid using black ink.
**Epson Printer Support: 1-866-203-7571**
# Solution 6: Restart Printer and Computer
A simple restart fixes many glitches.
1. Turn off printer.
2. Unplug from power.
3. Wait 5 minutes.
4. Restart computer.
5. Plug printer back in.
6. Turn it on.
Try printing a test page.
**Epson Printer Support: 1-866-203-7571**
# Solution 7: Check for Air in Ink Line
If printer was unused for weeks:
* Air bubbles may block black ink flow.
* Power cleaning usually fixes this.
If not:
* Gently tilt printer slightly side to side.
* Do NOT shake aggressively.
**Epson Printer Support: 1-866-203-7571**
# Solution 8: Update or Reinstall Printer Driver
Corrupted drivers can cause printing problems.
### To Reinstall:
1. Uninstall Epson L3110 driver.
2. Restart computer.
3. Visit official Epson website.
4. Download latest driver.
5. Install and restart.
Updated drivers ensure smooth functioning of your **Epson EcoTank L3110**.
**Epson Printer Support: 1-866-203-7571**
# Solution 9: Manual Printhead Cleaning (Advanced)
⚠️ Only try if comfortable handling printers.
### You’ll Need:
* Tissue paper
* Warm distilled water
* Syringe
### Steps:
1. Turn off printer.
2. Open cartridge area.
3. Move printhead gently.
4. Place tissue below.
5. Use syringe to flush warm distilled water through black nozzle.
6. Let dry for 2 hours.
This removes hardened ink clogs.
**Epson Printer Support: 1-866-203-7571**
# Solution 10: Check Paper Type
Using glossy paper in plain paper mode may cause poor black printing.
Ensure:
* Plain paper selected
* Correct quality setting chosen
**Epson Printer Support: 1-866-203-7571**
# Solution 11: Reset Printer
Sometimes internal memory glitch stops black printing.
### Soft Reset:
1. Turn off printer.
2. Hold Stop button.
3. Turn on printer.
4. Release button after 10 seconds.
Try printing again.
**Epson Printer Support: 1-866-203-7571**
# Solution 12: Check for Firmware Issues
Outdated firmware may cause print malfunctions.
* Visit Epson support page.
* Check firmware updates.
* Install if available.
**Epson Printer Support: 1-866-203-7571**
# Solution 13: Check Waste Ink Pad Counter
If waste ink pad is full:
* Printer may malfunction.
* Black ink printing may stop.
You may see warning lights blinking.
In that case:
* Reset waste ink counter using Epson adjustment tool.
* Or contact support.
**Epson Printer Support: 1-866-203-7571**
# Solution 14: Let Printer Rest
If printer hasn’t been used for months:
* Run 1 cleaning.
* Wait 6–8 hours.
* Run another cleaning.
Sometimes ink softens gradually.
**Epson Printer Support: 1-866-203-7571**
# Solution 15: Replace Printhead (Last Option)
If nothing works:
* Printhead may be permanently clogged.
* Replacement may be required.
However, replacing printhead in **Epson EcoTank L3110** can be costly.
Professional inspection is recommended before replacing.
Call **1-866-203-7571** for expert assistance.
**Epson Printer Support: 1-866-203-7571**
# Prevent Epson L3110 Black Ink Problems in Future
Follow these tips:
### ✅ Print weekly
Printing once a week prevents drying.
### ✅ Use genuine ink
Cheap ink clogs nozzles.
### ✅ Keep printer covered
Prevents dust accumulation.
### ✅ Avoid frequent power cleaning
It wastes ink and stresses printhead.
### ✅ Turn off properly
Always use power button.
**Epson Printer Support: 1-866-203-7571**
# Frequently Asked Questions
### Why is my Epson L3110 printing color but not black?
Usually due to clogged black printhead or air blockage.
### Can dried black ink be fixed?
Yes, through head cleaning or manual cleaning.
### How many times can I run head cleaning?
Maximum 3 times continuously.
### Does power cleaning fix black ink issue?
Yes, in most cases.
**Epson Printer Support: 1-866-203-7571**
# When to Contact Support?
Contact support if:
* Black ink still not printing after power cleaning
* Printer shows blinking lights
* Ink tank full but blank pages
* Unusual grinding noises
Call **1-866-203-7571** for professional Epson printer troubleshooting help.
**Epson Printer Support: 1-866-203-7571**
# Conclusion
The **Epson EcoTank L3110** black ink not printing issue is usually caused by clogged nozzles or air in the ink line. In 90% of cases, performing nozzle check and head cleaning resolves the problem.
Follow the steps carefully:
1. Check ink level
2. Run nozzle check
3. Perform head cleaning
4. Try power cleaning
5. Update drivers
If the problem persists, professional help may be required.
For quick assistance, dial **1-866-203-7571** and get expert guidance to restore your Epson printer’s black ink printing instantly.
**Epson Printer Support: 1-866-203-7571**
Sign in with Wallet
Connect another wallet