---
# System prepended metadata

title: Brother HL-L2350DW WiFi Setup

---

**How to Connect Brother HL-L2350DW to WiFi Network**

At first, connecting your printer to WiFi may seem daunting, particularly if it's your first time. The Brother HL-L2350DW is a dependable monochrome laser printer that makes printing much easier once it's linked to your wireless network. This microblog takes you step-by-step through the procedure in an easy-to-follow manner so you can finish the setup without worry.

![20251229_1815_Setting Up Wireless Printer_simple_compose_01kdn283a3ebx9v5nke02d3zjv](https://hackmd.io/_uploads/By-v5ex4bg.png)


**How to Link a WiFi Network to a Brother HL-L2350DW**
**Get Ready Before You Begin**
* Verify the functionality of your WiFi network.
* Make sure your WiFi password and network name (SSID) are available.
* For a reliable connection, place the printer in close proximity to the router during setup.
* Turn on the printer and make sure the error lights are off.

**Reset Network Settings (Suggested for Initial Setup)**
* Switch off the printer.
* Press and hold the Power button until every LED illuminates, then let go.
* This helps prevent connection problems and removes outdated network data.

**To set up wireless, use the Control Panel.**
* Hold down the WiFi button until the WiFi LED begins to flicker.
* The printer enters wireless setup mode as a result.
* The printer is prepared to connect to a network when the light starts to flicker.

**Set Up Your Computer's Brother Printer Software**
* Get the most recent drivers for your operating system by going to the official Brother website.
* When asked, launch the installation and choose Wireless Network Connection.
* For a seamless [**Brother HL-L2350DW WiFi Setup**](https://brotherprintwifi.com/brother-hl-l2350dw-wifi-setup/), this step is crucial.

**Use software to link the printer to WiFi.**
* From the list that appears on the screen, select your WiFi network.
* Carefully enter the right WiFi password.
* It can take a few minutes for the program to create the connection.

**Verify the Connection**
* The printer's WiFi LED should glow solid blue when it is connected.
* To verify that the connection is successful, print a test page.
* Your brother's printer setup is finished if the page prints successfully.

**Troubleshooting Advice**
* If the connection is lost, restart the router and printer.
* This model does not support 5GHz, therefore make sure you are connecting to a 2.4GHz network.
* If the printer cannot be identified, reinstall the drivers.

It doesn't have to be difficult to set up wireless printing. You can easily finish your Brother HL-L2350DW WiFi Setup and take advantage of hassle-free printing from any location in your house or place of business by following these easy steps.  To know more about the [**brother printer set up**](https://brotherprintwifi.com/) visit our webpage.
