# Mastering Smooth Floors: A Complete Guide to Using Egaline for Perfect Leveling
Introduction
The first step in building a beautiful and sturdy foundation for any room is to have a level, smooth floor. Bumping or dipping your floor can be problematic when you're preparing to install new tiles, vinyl, or hardwood. That's where [[Egaline](https://rbmb.nl/egaline/)](https://) comes in. This special floor leveling compound helps make uneven surfaces flat and smooth. In this guide, you will learn how egaline works, when to use it, and how to apply it properly to get the best results.
What Is Egaline?
Egaline is a type of self-leveling compound made to smooth out rough or uneven floors. It is frequently used prior to installing new flooring materials. The product comes in powder form and is mixed with water to create a smooth, liquid-like mix. Once poured onto the floor, it spreads out evenly on its own. When it dries, it forms a flat, solid surface that is perfect for installing your final floor covering.
Why Use Egaline?
Using egaline can make a big difference in how your final floor looks and lasts. A flat surface helps prevent cracks, loose tiles, or bumps in vinyl or carpet. It also helps avoid squeaky floors and reduces wear over time. Even a small bump or dip in your subfloor can cause damage later. With Egaline, you can fix these problems before they get worse. Plus, using egaline is much faster and easier than old-fashioned ways of leveling a floor with cement or wood.
Where Can You Use Egaline?
You can use egaline in many places, including homes, garages, and commercial buildings. It works on both concrete and wooden subfloors. It can be used in kitchens, bathrooms, basements, or any place where you want your floors to be flat and smooth. However, it’s important to check the label or ask a professional if the product is safe for your type of floor.
Getting Ready to Use Egaline
Before using egaline, you need to prepare the area. Clean the floor first. Sweep or vacuum all dust and dirt. Make sure there is no oil, glue, or paint on the surface. If your floor has cracks or holes, fill them in first. Some people use a primer to help the egaline stick better. Once your floor is clean and dry, you're ready to mix and pour.
Mixing the Egaline
Read the instructions on your Egaline package. Most types are mixed with water. You can use a large bucket and a power drill with a mixing paddle. Stir until there are no lumps and the mixture is smooth. It should look like thick pancake batter. Wait no longer than necessary because egaline sets quickly and must be poured immediately after mixing.
Pouring and Spreading the Egaline
Start pouring the egaline in one corner of the room. It will begin to spread out on its own. You can help move it around with a long trowel or a special leveling rake. Try to work fast and don’t stop too long. The majority of egaline sets in 10 to 20 minutes. You want the whole floor to be covered before that happens.
Letting It Dry
After pouring, let the egaline dry fully. This can take a few hours or up to a full day, depending on the product and room temperature. Do not walk on it until it is hard and dry. You will have a level, smooth surface that is ready for new flooring once it has set.
Common Mistakes to Avoid
Many people make simple mistakes when using egaline. One common mistake is not cleaning the floor well enough. This can keep the egaline from sticking right. The product's improper mixing is another error. It will not spread correctly if it is either too thin or too thick. Also, make sure the room is not too cold or hot. Extreme temperatures can change how the egaline dries.
Can You Use Egaline by Yourself?
Yes, you can. Many DIY homeowners use egaline to fix their floors. However, it’s a good idea to read the product label carefully and watch how-to videos before you start. It's never a bad idea to get help from a flooring professional if you're not sure. But with a little patience and planning, many people get great results on their own.
Benefits of Using Egaline
There are many great reasons to use egaline. It saves time and effort compared to traditional floor leveling methods. It also creates a very flat surface that looks good and lasts long. It can be used in many areas and is strong enough to hold up under heavy furniture and foot traffic. Plus, it works well with most modern flooring types.
Is Egaline Safe?
Yes, egaline is safe to use as long as you follow the instructions. Always wear gloves and a mask when mixing the powder, since it can make dust. Keep kids and pets away until the floor is fully dry. Extra egaline should be kept dry and away from moisture.
Choosing the Right Egaline Product
Egaline comes in a variety of brands and types. Some are made for thin layers, while others can be poured in thick coats. Some dry fast and others take more time. Think about your project before picking one. If you’re covering small bumps, a thin version might work. For large dips or holes, you’ll need a heavy-duty kind. Ask at your local hardware store if you’re unsure.
Conclusion
A smooth floor is not just about looks—it also helps your floors last longer and stay safe. Using egaline is one of the best ways to make sure your subfloor is ready for any type of new flooring. It's easy to use, works fast, and gives great results when used properly. Whether you're working in a small room or a big area, learning how to use egaline can help you get the job done right. Take your time, follow the steps, and enjoy your flat, solid floor for years to come.