---
# System prepended metadata

title: Untitled

---

#ETRI HC-06 setting guide

1.	Baud setting
A.	System will Use 115200 bps to send data thru Bluetooth
So, we need to set hc-06 baud ‘115200’ with AT command (A.K.A "Hayes command set").
***we are following Product Data Sheet from Guangzhou Hc Information Technology (https://www.olimex.com/Products/Components/RF/BLUETOOTH-SERIAL-HC-06/resources/hc06.pdf)***

##### Note. HC-06 module's default setting
    bluetooth name             : HC-06
    bluetooth PIN(password)    : 1234
    bluetooth baud             : 9600
    
```1. set HC-06 for getting AT Command (connecting MCU UART channel with  9600 baud).```
```2. send "AT+BAUD8" which set the baud 115200```
```3. set MCU UART channel 115200 baud```
```4. start pairing the host device and HC-06 thru bluetooth (based on default setting of bluetooth name and PIN)```





