**Step To Reset a Belkin Router**
Belkin brand routers are equipped for an equipment reset in the event that there are any issues with the ongoing settings or on the other hand assuming admittance to the router has been impaired coincidentally. The equipment reset capability can be performed on **[Belkin Router Login](http://belkinrouterlogins.com)** by following these means:
**Note:** Resetting a Belkin router will eliminate the ongoing settings as a whole and return it to the production line default settings. Try not to play out the reset except if you have the data expected to arrangement the switch to the right settings required once the reset has been finished.
**Manual Hardware Reset of the Belkin Router**
To play out an equipment reset on a Belkin Router:
1) Find the reset button on the gadget. A red button might be concealed on the back or side of the switch or it could be obviously set apart with "reset." The switch ought to be on prior to proceeding with these means.
Note: You might have to utilize a meager item, for example, a paperclip to press the button.
2) Press and hold the button for around 10 seconds then, at that point, discharge the button to permit the switch to reset. It might require as long as a moment for the switch to finish the reset cycle and return the switch to the processing plant default settings.
3) From this point, reappear the past settings or attempt various settings as the ISP suggests for Internet network.
Using the Belkin Router Setup Utility
The Belkin router setup utility is accessible in most of Belkin routers. To get to this utility, an organization skilled Device should be associated with the Belkin router by means of LAN or remote access.
When associated, an internet browser on the device ought to have the location bar explored to the IP address: 192.168.2.1 (http://192.168.2.1/)
This will open the Belkin Router Setup Utility home access page for the router. Situated on this page's left hand segment is a choice marked "Reestablish Factory Default," which can be chosen. After the determination to reestablish the router to the manufacturing plant default is chosen, an executive secret key brief and an affirmation brief will be shown.
The default secret key ought to be left clear and on the off chance that a secret key has been set, the ongoing secret key should be utilized to play out a product based reset utilizing the Belkin Router Setup Utility. After a brief restart period, the router ought to be open again with all possible settings returned to the default industrial facility settings.
Starting here, the client can reemerge the past settings or attempt various settings as their ISP suggests for Internet network.
**Software Restart of Belkin Router**
A gadget associated with the LAN or the router's remote access ought to get to the Belkin Router Setup utility.
When associated, an internet browser on the device ought to have the location bar explored to the IP address: 192.168.2.1 (http://192.168.2.1/)
This will open the **[Belkin WiFi Range Extender](https://blogsteak.com/how-to-setup-belkin-wifi-range-extender-wirelessly/)** Utility home access page for the router. Situated on this page's left hand section is a choice named "Restart Router," which can be chosen. After the choice to restart the router, an executive secret phrase expeditious and an affirmation brief will be shown.
The default secret key ought to be left clear and on the off chance that a secret phrase has been set, the ongoing secret word should be utilized to play out a product based restart utilizing the Belkin Setup Utility. After a brief restart period, the router will have cycled, holding the past settings.
If the restart choice for the Belkin Router doesn't tackle the issue with the router, it might should be reset and reconfigured to accurately work.
![](https://i.imgur.com/895HyyH.jpg)