# What is the initial setup.printer com process?

**1.Unpack and Assemble:** Take out of the packaging the printer and all of the included parts. To install any trays, paper feeds, or ink cartridges, refer to the instruction manual.

**2.Link Power and Ink:** Make sure the printer is plugged into a power source. Make sure the toner or ink cartridges click into place after opening the cartridge access area.

**3.Load Paper:** Spread the paper, adjusting the paper guides as necessary. To ensure smooth feeding, insert a stack of paper and make sure it is properly aligned.

**4.Install Software:** Put in the installation CD or get the most recent drivers from the website of the manufacturer. To finish setting up the software, launch the installer and adhere to the on-screen directions.

**5.Connect to Computer:** You can either wirelessly configure the printer by choosing your Wi-Fi network and, if prompted, entering the password, or you can connect it to your computer using a USB cable.

**6.Print a Test Page:** To ensure that the printer is operating correctly and that the settings are set up correctly, print a test page from your computer after installation.

Now that it's configured, your printer is ready to go! any query go to **[setup.printer.com](https://setupbrothercom.web.fc2.com/)**