# Logs TotalCross Último log de boot para Colibri iMX6DL (05 Maio 2020, 14:15): ```shell= switch to partitions #0, OK mmc1 is current device Scanning mmc 1:1... Found U-Boot script /boot.scr reading /boot.scr 1202 bytes read in 13 ms (89.8 KiB/s) ## Executing script at 17000000 reading imx6dl-colibri-eval-v3.dtb 43349 bytes read in 20 ms (2.1 MiB/s) reading zImage 9443048 bytes read in 499 ms (18 MiB/s) ## Flattened Device Tree blob at 12100000 Booting using the fdt blob at 0x12100000 Loading Device Tree to 1fff2000, end 1ffff954 ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.4.31-fslc+gbde0c4ce26b1 (oe-user@oe-host) (gcc version 9.3.0 (GCC)) #1 SMP Fri Apr 10 18:01:46 UTC 2020 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Toradex Colibri iMX6DL/S on Colibri Evaluation Board V3 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 64 MiB at 0x2c000000 [ 0.000000] percpu: Embedded 20 pages/cpu s50664 r8192 d23064 u81920 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 130048 [ 0.000000] Kernel command line: galcore.contiguousSize=50331648 user_debug=30 root=PARTUUID=48a81dd2-02 rw rootfstype=ext4 rootwait fec_mac=00:14M [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 427812K/524288K available (12288K kernel code, 960K rwdata, 4380K rodata, 1024K init, 6567K bss, 30940K reserved, 65536K cma-r) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Running RCU self tests [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU lockdep checking is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] L2C-310 erratum 769419 enabled [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9 [ 0.000000] L2C-310 ID prefetch enabled, offset 16 lines [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled [ 0.000000] L2C-310 cache controller enabled, 16 ways, 512 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76450001 [ 0.000000] random: get_random_bytes called from start_kernel+0x2b4/0x4d4 with crng_init=0 [ 0.000000] Switching to timer-based delay loop, resolution 333ns [ 0.000007] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns [ 0.000034] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns [ 0.001924] Console: colour dummy device 80x30 [ 0.004367] printk: console [tty1] enabled [ 0.004426] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.004513] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.004569] ... MAX_LOCK_DEPTH: 48 [ 0.004623] ... MAX_LOCKDEP_KEYS: 8192 [ 0.004679] ... CLASSHASH_SIZE: 4096 [ 0.004733] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.004790] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.004845] ... CHAINHASH_SIZE: 32768 [ 0.004901] memory used by lock dependency info: 3997 kB [ 0.004966] memory used for stack traces: 2112 kB [ 0.005026] per task-struct memory footprint: 1536 bytes [ 0.005180] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=30000) [ 0.005304] pid_max: default: 32768 minimum: 301 [ 0.005718] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.005822] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.009383] CPU: Testing write buffer coherency: ok [ 0.009914] CPU0: Spectre v2: using BPIALL workaround [ 0.011427] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.013829] Setting up static identity map for 0x10100000 - 0x10100078 [ 0.014548] rcu: Hierarchical SRCU implementation. [ 0.016032] smp: Bringing up secondary CPUs ... [ 0.018715] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.018730] CPU1: Spectre v2: using BPIALL workaround [ 0.019849] smp: Brought up 1 node, 2 CPUs [ 0.019930] SMP: Total of 2 processors activated (12.00 BogoMIPS). [ 0.020018] CPU: All CPU(s) started in SVC mode. [ 0.022409] devtmpfs: initialized [ 0.051884] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.054445] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.054631] futex hash table entries: 512 (order: 3, 32768 bytes, linear) [ 0.058710] pinctrl core: initialized pinctrl subsystem [ 0.064562] NET: Registered protocol family 16 [ 0.086412] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.090105] cpuidle: using governor menu [ 0.090669] CPU identified as i.MX6DL, silicon rev 1.4 [ 0.112553] vdd1p1: supplied by regulator-dummy [ 0.114521] vdd3p0: supplied by regulator-dummy [ 0.116120] vdd2p5: supplied by regulator-dummy [ 0.117606] vddarm: supplied by regulator-dummy [ 0.119132] vddpu: supplied by regulator-dummy [ 0.120658] vddsoc: supplied by regulator-dummy [ 0.146096] No ATAGs? [ 0.146427] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.146648] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.151337] imx6dl-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver [ 0.250341] mxs-dma 110000.dma-apbh: initialized [ 0.257220] vgaarb: loaded [ 0.258904] SCSI subsystem initialized [ 0.260585] usbcore: registered new interface driver usbfs [ 0.260884] usbcore: registered new interface driver hub [ 0.261206] usbcore: registered new device driver usb [ 0.261614] usb_phy_generic usbphynop1: usbphynop1 supply vcc not found, using dummy regulator [ 0.262486] usb_phy_generic usbphynop2: usbphynop2 supply vcc not found, using dummy regulator [ 0.270815] stmpe-i2c 0-0041: stmpe811 detected, chip id: 0x811 [ 0.362698] i2c i2c-0: IMX I2C adapter registered [ 0.364751] i2c i2c-1: IMX I2C adapter registered [ 0.365198] mc: Linux media interface: v0.10 [ 0.365367] videodev: Linux video capture interface: v2.00 [ 0.366002] pps_core: LinuxPPS API ver. 1 registered [ 0.366086] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 0.366255] PTP clock support registered [ 0.367324] Advanced Linux Sound Architecture Driver Initialized. [ 0.371846] Bluetooth: Core ver 2.22 [ 0.372025] NET: Registered protocol family 31 [ 0.372098] Bluetooth: HCI device and connection manager initialized [ 0.372300] Bluetooth: HCI socket layer initialized [ 0.372393] Bluetooth: L2CAP socket layer initialized [ 0.372611] Bluetooth: SCO socket layer initialized [ 0.375358] clocksource: Switched to clocksource mxc_timer1 [ 1.082572] VFS: Disk quotas dquot_6.6.0 [ 1.082802] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.111655] thermal_sys: Registered thermal governor 'step_wise' [ 1.112378] NET: Registered protocol family 2 [ 1.114332] tcp_listen_portaddr_hash hash table entries: 256 (order: 1, 10240 bytes, linear) [ 1.114545] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) [ 1.114735] TCP bind hash table entries: 4096 (order: 5, 147456 bytes, linear) [ 1.115685] TCP: Hash tables configured (established 4096 bind 4096) [ 1.116590] UDP hash table entries: 256 (order: 2, 20480 bytes, linear) [ 1.116783] UDP-Lite hash table entries: 256 (order: 2, 20480 bytes, linear) [ 1.117332] NET: Registered protocol family 1 [ 1.119696] RPC: Registered named UNIX socket transport module. [ 1.119862] RPC: Registered udp transport module. [ 1.119936] RPC: Registered tcp transport module. [ 1.120007] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.121249] PCI: CLS 0 bytes, default 64 [ 1.123573] hw perfevents: no interrupt-affinity property for /pmu, guessing. [ 1.124215] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 1.128720] Initialise system trusted keyrings [ 1.129603] workingset: timestamp_bits=30 max_order=17 bucket_order=0 [ 1.148600] NFS: Registering the id_resolver key type [ 1.148858] Key type id_resolver registered [ 1.149001] Key type id_legacy registered [ 1.149247] jffs2: version 2.2. (NAND) �© 2001-2006 Red Hat, Inc. [ 1.150699] fuse: init (API version 7.31) [ 1.189624] Key type asymmetric registered [ 1.189863] Asymmetric key parser 'x509' registered [ 1.190135] io scheduler mq-deadline registered [ 1.190215] io scheduler kyber registered [ 1.194804] imx-weim 21b8000.weim: Driver registered. [ 1.202467] pwm-backlight backlight: backlight supply power not found, using dummy regulator [ 1.213965] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2 [ 1.214193] imx-sdma 20ec000.sdma: Falling back to sysfs fallback for: imx/sdma/sdma-imx6q.bin [ 1.223220] pfuze100-regulator 0-0008: Full layer: 2, Metal layer: 1 [ 1.224193] pfuze100-regulator 0-0008: FAB: 0, FIN: 0 [ 1.224280] pfuze100-regulator 0-0008: pfuze100 found. [ 1.252854] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 26, base_baud = 5000000) is a IMX [ 2.104126] printk: console [ttymxc0] enabled [ 2.112396] 21e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 71, base_baud = 5000000) is a IMX [ 2.123042] 21ec000.serial: ttymxc2 at MMIO 0x21ec000 (irq = 72, base_baud = 5000000) is a IMX [ 2.148035] panel-simple panel: panel supply power not found, using dummy regulator [ 2.168281] etnaviv etnaviv: bound 130000.gpu (ops gpu_ops) [ 2.174793] etnaviv etnaviv: bound 134000.gpu (ops gpu_ops) [ 2.180566] etnaviv-gpu 130000.gpu: model: GC880, revision: 5106 [ 2.187620] etnaviv-gpu 134000.gpu: model: GC320, revision: 5007 [ 2.197223] [drm] Initialized etnaviv 1.3.0 20151214 for etnaviv on minor 0 [ 2.209944] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.216822] [drm] No driver support for vblank timestamp query. [ 2.224387] imx-drm display-subsystem: bound imx-ipuv3-crtc.2 (ops ipu_crtc_ops) [ 2.232446] imx-drm display-subsystem: bound imx-ipuv3-crtc.3 (ops ipu_crtc_ops) [ 2.240725] imx-drm display-subsystem: bound disp0 (ops imx_pd_ops) [ 2.248347] dwhdmi-imx 120000.hdmi: Detected HDMI TX controller v1.31a with HDCP (DWC HDMI 3D TX PHY) [ 2.259780] dwhdmi-imx 120000.hdmi: registered DesignWare HDMI I2C bus driver [ 2.271475] imx-drm display-subsystem: bound 120000.hdmi (ops dw_hdmi_imx_ops) [ 2.282044] [drm] Initialized imx-drm 1.0.0 20120507 for display-subsystem on minor 1 [ 2.356994] Console: switching to colour frame buffer device 80x30 [ 2.381435] imx-drm display-subsystem: fb0: imx-drmdrmfb frame buffer device [ 2.390856] imx-ipuv3 2400000.ipu: IPUv3H probed [ 2.424644] brd: module loaded [ 2.460704] loop: module loaded [ 2.476306] spi_imx 2014000.spi: probed [ 2.483766] libphy: Fixed MDIO Bus: probed [ 2.490837] CAN device driver interface [ 2.500593] pps pps0: new PPS source ptp0 [ 2.509018] libphy: fec_enet_mii_bus: probed [ 2.518804] fec 2188000.ethernet eth0: registered PHC device 0 [ 2.528198] usbcore: registered new interface driver r8152 [ 2.535400] usbcore: registered new interface driver lan78xx [ 2.542686] usbcore: registered new interface driver asix [ 2.549756] usbcore: registered new interface driver ax88179_178a [ 2.557373] usbcore: registered new interface driver cdc_ether [ 2.564641] usbcore: registered new interface driver smsc95xx [ 2.571872] usbcore: registered new interface driver net1080 [ 2.578890] usbcore: registered new interface driver cdc_subset [ 2.586189] usbcore: registered new interface driver zaurus [ 2.592959] usbcore: registered new interface driver MOSCHIP usb-ethernet driver [ 2.602564] usbcore: registered new interface driver cdc_ncm [ 2.609352] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.616979] ehci-pci: EHCI PCI platform driver [ 2.622532] ehci-mxc: Freescale On-Chip EHCI Host driver [ 2.629852] usbcore: registered new interface driver usb-storage [ 2.650632] imx_usb 2184200.usb: No over current polarity defined [ 2.662730] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 2.669134] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1 [ 2.705399] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 2.713430] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 [ 2.724107] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.733638] usb usb1: Product: EHCI Host Controller [ 2.739747] usb usb1: Manufacturer: Linux 5.4.31-fslc+gbde0c4ce26b1 ehci_hcd [ 2.748109] usb usb1: SerialNumber: ci_hdrc.1 [ 2.757651] hub 1-0:1.0: USB hub found [ 2.762993] hub 1-0:1.0: 1 port detected [ 2.776679] stmpe-ts stmpe-ts: DMA mask not set [ 2.796484] input: stmpe-ts as /devices/soc0/soc/2100000.aips-bus/21a4000.i2c/i2c-0/0-0041/stmpe-ts/input/input0 [ 2.820499] snvs_rtc 20cc000.snvs:snvs-rtc-lp: registered as rtc1 [ 2.828562] i2c /dev entries driver [ 2.845129] imx2-wdt 20bc000.wdog: timeout 60 sec (nowayout=0) [ 2.853494] Bluetooth: HCI UART driver ver 2.3 [ 2.859451] Bluetooth: HCI UART protocol H4 registered [ 2.866151] Bluetooth: HCI UART protocol LL registered [ 2.874536] sdhci: Secure Digital Host Controller Interface driver [ 2.882551] sdhci: Copyright(c) Pierre Ossman [ 2.888352] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.899997] sdhci-esdhc-imx 2190000.usdhc: Got CD GPIO [ 2.944930] mmc0: SDHCI controller on 2190000.usdhc [2190000.usdhc] using ADMA [ 2.995540] mmc1: SDHCI controller on 2198000.usdhc [2198000.usdhc] using ADMA [ 3.011348] mmc0: new high speed SDXC card at address e624 [ 3.026562] caam 2100000.caam: Entropy delay = 3200 [ 3.033756] random: fast init done [ 3.093661] caam 2100000.caam: Instantiated RNG4 SH0 [ 3.154420] caam 2100000.caam: Instantiated RNG4 SH1 [ 3.160800] caam 2100000.caam: device ID = 0x0a16010000000100 (Era 4) [ 3.168640] caam 2100000.caam: job rings = 2, qi = 0 [ 3.178128] mmcblk0: mmc0:e624 SU64G 59.5 GiB [ 3.206601] mmcblk0: p1 p2 [ 3.238776] mmc1: new DDR MMC card at address 0001 [ 3.247128] mmcblk1: mmc1:0001 Q2J54A 3.64 GiB [ 3.249656] caam algorithms registered in /proc/crypto [ 3.253510] mmcblk1boot0: mmc1:0001 Q2J54A partition 1 2.00 MiB [ 3.267958] mmcblk1boot1: mmc1:0001 Q2J54A partition 2 2.00 MiB [ 3.276901] mmcblk1rpmb: mmc1:0001 Q2J54A partition 3 512 KiB, chardev (244:0) [ 3.286846] caam_jr 2101000.jr0: registering rng-caam [ 3.296452] usbcore: registered new interface driver usbhid [ 3.297494] mmcblk1: p1 p2 [ 3.303352] usbhid: USB HID core driver [ 3.317503] ipu1_csi0: Registered ipu1_csi0 capture as /dev/video0 [ 3.327237] ipu1_ic_prpenc: Registered ipu1_ic_prpenc capture as /dev/video1 [ 3.336699] ipu1_ic_prpvf: Registered ipu1_ic_prpvf capture as /dev/video2 [ 3.344977] imx-media: ipu1_csi0:1 -> ipu1_ic_prp:0 [ 3.351548] imx-media: ipu1_csi0:1 -> ipu1_vdic:0 [ 3.357611] imx-media: ipu1_vdic:2 -> ipu1_ic_prp:0 [ 3.363648] imx-media: ipu1_ic_prp:1 -> ipu1_ic_prpenc:0 [ 3.370253] imx-media: ipu1_ic_prp:2 -> ipu1_ic_prpvf:0 [ 3.376769] imx-media: subdev ipu1_csi0 bound [ 3.383378] ipu1_csi1: Registered ipu1_csi1 capture as /dev/video3 [ 3.390851] imx-media: ipu1_csi1:1 -> ipu1_ic_prp:0 [ 3.396972] imx-media: ipu1_csi1:1 -> ipu1_vdic:0 [ 3.402815] imx-media: subdev ipu1_csi1 bound [ 3.426267] sgtl5000 0-000a: sgtl5000 revision 0x11 [ 3.472583] fsl-asoc-card sound: ASoC: failed to init link HiFi: -517 [ 3.484479] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW [ 3.525046] imx-sgtl5000 sound: sgtl5000 <-> 2028000.ssi mapping ok [ 3.550122] NET: Registered protocol family 10 [ 3.560223] Segment Routing with IPv6 [ 3.565215] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 3.574624] NET: Registered protocol family 17 [ 3.580406] can: controller area network core (rev 20170425 abi 9) [ 3.588197] NET: Registered protocol family 29 [ 3.593854] can: raw protocol (rev 20170425) [ 3.599586] can: broadcast manager protocol (rev 20170425 t) [ 3.606647] can: netlink gateway (rev 20190810) max_hops=1 [ 3.613780] Key type dns_resolver registered [ 3.631838] Registering SWP/SWPB emulation handler [ 3.638260] Loading compiled-in X.509 certificates [ 3.735879] imx-media: ipu1_csi0_mux:5 -> ipu1_csi0:0 [ 3.742021] imx-media: ipu1_csi1_mux:5 -> ipu1_csi1:0 [ 3.754395] imx-media: Registered ipu_ic_pp csc/scaler as /dev/video4 [ 3.766876] imx_thermal tempmon: Commercial CPU temperature grade - max:95C critical:90C passive:85C [ 3.783198] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 3.791942] hctosys: unable to open rtc device (rtc0) [ 3.798487] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 3.813789] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 3.822344] ALSA device list: [ 3.827272] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 3.835472] #0: imx6dl-colibri-sgtl5000 [ 3.838179] platform regulatory.0: Falling back to sysfs fallback for: regulatory.db [ 3.878586] EXT4-fs (mmcblk0p2): warning: mounting fs with errors, running e2fsck is recommended [ 3.946248] EXT4-fs (mmcblk0p2): recovery complete [ 3.953129] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 3.963978] VFS: Mounted root (ext4 filesystem) on device 179:2. [ 3.973458] devtmpfs: mounted [ 3.979018] Freeing unused kernel memory: 1024K [ 3.985715] Run /sbin/init as init process [ 3.995206] EXT4-fs error (device mmcblk0p2): ext4_dx_find_entry:1641: inode #1005: block 2: comm swapper/0: Directory block failed checksum [ 4.023240] Starting init: /sbin/init exists but couldn't execute it (error -74) [ 4.033308] Run /etc/init as init process [ 4.042077] EXT4-fs error (device mmcblk0p2): ext4_dx_find_entry:1641: inode #130: block 2: comm swapper/0: Directory block failed checksum [ 4.459804] Starting init: /etc/init exists but couldn't execute it (error -74) [ 4.473630] Run /bin/init as init process [ 4.484114] EXT4-fs error (device mmcblk0p2): ext4_dx_find_entry:1641: inode #12: block 3: comm swapper/0: Directory block failed checksum [ 4.675837] Starting init: /bin/init exists but couldn't execute it (error -74) [ 4.689682] Run /bin/sh as init process [ 4.707373] EXT4-fs error (device mmcblk0p2): ext4_dx_find_entry:1641: inode #367: block 2: comm swapper/0: Directory block failed checksum [ 4.888670] Starting init: /bin/sh exists but couldn't execute it (error -74) [ 4.897289] Kernel panic - not syncing: No working init found. Try passing init= option to kernel. See Linux Documentation/admin-guide/init.rst f. [ 4.915658] CPU0: stopping [ 4.919740] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.4.31-fslc+gbde0c4ce26b1 #1 [ 4.929878] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) [ 4.937773] [<c0112d98>] (unwind_backtrace) from [<c010cdac>] (show_stack+0x10/0x14) [ 4.948098] [<c010cdac>] (show_stack) from [<c0c5977c>] (dump_stack+0xe0/0x114) [ 4.958007] [<c0c5977c>] (dump_stack) from [<c0111188>] (handle_IPI+0x348/0x3b0) [ 4.968041] [<c0111188>] (handle_IPI) from [<c053e044>] (gic_handle_irq+0x8c/0x9c) [ 4.978257] [<c053e044>] (gic_handle_irq) from [<c0101a70>] (__irq_svc+0x70/0x98) [ 4.988413] Exception stack(0xc1301ed8 to 0xc1301f20) [ 4.994822] 1ec0: 00000001 00000006 [ 5.005605] 1ee0: 00000000 c130c780 00000001 24fa7b6c c130faf4 dbb9bdb8 c13eb108 00000001 [ 5.016401] 1f00: 00000001 24fc9cff 00000000 c1301f28 c0184c20 c08a725c 20000013 ffffffff [ 5.027215] [<c0101a70>] (__irq_svc) from [<c08a725c>] (cpuidle_enter_state+0x16c/0x520) [ 5.037950] [<c08a725c>] (cpuidle_enter_state) from [<c08a764c>] (cpuidle_enter+0x28/0x38) [ 5.048899] [<c08a764c>] (cpuidle_enter) from [<c0160764>] (do_idle+0x1dc/0x2b0) [ 5.059020] [<c0160764>] (do_idle) from [<c0160bec>] (cpu_startup_entry+0x18/0x1c) [ 5.069329] [<c0160bec>] (cpu_startup_entry) from [<c1200e20>] (start_kernel+0x404/0x4d4) [ 5.080273] ---[ end Kernel panic - not syncing: No working init found. Try passing init= option to kernel. See Linux Documentation/admin-guide/i- ```