---
# System prepended metadata

title: Meeting Notes 11/08/21
tags: [meeting-notes]

---

---
title: Meeting Notes 11/08/21
tags: meeting-notes
---

# Meeting Notes 11/08/21
Received $150 from PEPC

## Software
- got circuit built! planning on testing it on the raspberry pi on saturday 
- color detection: paint robots blue and detect robots in general and then further specify white/black pieces based off of light/dark blue 


## Hardware
### Motor Mounts
- 3D Printing:
    - Problems with the previous iteration: outer layer was too thick and caused infill problems and weird spacing when printing leaving holes in the print
    - Adjusted border and infill, new print should be much sturdier and stronger
    - Get instructions on the print and add it to the Wiki once we have a working one
- CNC:
    - Set a time to finish manufacturing the metal mounts (just need to saw off the back of the mount and drill holes)
- Design Matrix - weigh the 3D Printed and CNC options using a design matrix so that we can determine what works best
    - Durability, sustainability, cost, complexity, time, feasibility

### Chess Board
- Looking into buying different materials for the board
    - Poster paper, nylon cloth, wood, cardboard
- Design matrix to figure out which one is best for long term and short term

## Shopping List
- [ ] Board Material (poster paper, wood)
- [ ] Camera Mount Material
- [ ] Wheels
- [ ] Robot Frames (wood)
- [ ] LEDs
- [ ] Paint (blue)
- [ ] Resistors
- [ ] 12V Battery

## Plan for Saturday
- Using old chess board and frames to test computer vision
- Completing circuit and running it on the RPI 4
- Get materials list done and review with whole team - sort out all the rough edges of that and any remaining questions we have