---
# System prepended metadata

title: '  1-866-203-7571HowtoFixEpsonWorkforce600PaperJamError'

---

# 1-866-203-7571 How to Fix Epson Workforce 600 Paper Jam Error

***Epson Printer Support at 1-866-203-7571**

The **Epson Workforce 600** is a reliable and versatile printer known for its high-speed performance and print quality. However, one of the most common problems users encounter is the **“Paper Jam Error”**. This error can occur even when there is no paper physically stuck inside, which can be frustrating. Fortunately, this issue can be fixed with a few systematic steps.

This comprehensive 3,000-word guide will walk you through **how to identify, fix, and prevent paper jams** in your Epson Workforce 600 printer. Whether the jam is inside the paper tray, the rear feed, or caused by internal rollers, we’ve got every detail covered.

If you’re facing persistent jams or the printer keeps displaying the **Paper Jam** message despite being clear, don’t worry — this guide will help you resolve it quickly.

For instant technical assistance, you can contact **Epson Printer Support** at **1-866-203-7571**.

***Epson Printer Support at 1-866-203-7571**

## **Table of Contents**

1. Introduction to Paper Jam Errors
2. Common Causes of Paper Jam in Epson Workforce 600
3. Identifying the Type of Paper Jam
4. Step-by-Step Solution for Paper Jam Error

   * Step 1: Power Off and Unplug the Printer
   * Step 2: Check the Rear Paper Feed
   * Step 3: Remove Jammed Paper from the Output Tray
   * Step 4: Inspect the Automatic Document Feeder (ADF)
   * Step 5: Check the Paper Cassette (Bottom Tray)
   * Step 6: Clean and Inspect Internal Rollers
   * Step 7: Reset the Printer
5. Fixing “Paper Jam” Error When No Paper Is Stuck
6. Preventive Maintenance Tips
7. Software and Firmware-Related Causes
8. When to Contact Technical Support (1-866-203-7571)
9. Conclusion

***Epson Printer Support at 1-866-203-7571**

## **1. Introduction to Paper Jam Errors**

A **paper jam error** occurs when paper becomes stuck or improperly fed within the printer’s paper path. In the Epson Workforce 600, this can happen at multiple locations — the **input tray**, **rear feed**, **output slot**, or even inside the **ADF (Automatic Document Feeder)**.

In many cases, the paper jam error may persist **even after the jammed sheet is removed**. This happens due to **sensor misalignment**, **roller debris**, or **firmware issues**. Understanding the cause and applying the correct fix ensures smooth printing and prevents repeated jams.

If your printer repeatedly shows **“Paper Jam”**, follow the guide below carefully. And if at any point the problem persists, you can reach Epson-certified experts at **1-866-203-7571** for personalized support.

***Epson Printer Support at 1-866-203-7571**

## **2. Common Causes of Paper Jam in Epson Workforce 600**

Before jumping into troubleshooting, it’s important to identify **what might be causing the paper jam**. Below are the most frequent causes:

### **A. Incorrect Paper Loading**

* Overfilling the paper tray or inserting paper at an angle can cause a jam.
* Using curled, wrinkled, or damp paper may lead to misfeeds.

### **B. Dirty or Worn Rollers**

* Over time, the printer’s paper feed rollers accumulate dust and ink residue.
* Dirty rollers fail to grip paper properly, leading to feeding issues or jams.

### **C. Obstructions Inside the Printer**

* Small torn pieces of paper or foreign objects (clips, labels, staples) inside the printer path can trigger jam errors.

### **D. Incorrect Paper Size or Type**

* Using incompatible paper types (like thick cardstock or glossy paper in a plain tray) may cause paper jams.

### **E. Software or Firmware Glitches**

* Sometimes, the printer mistakenly detects a jam even when none exists, due to firmware bugs or sensor errors.

### **F. Improper Maintenance**

* Skipping periodic cleaning or not using the printer regularly can lead to debris buildup.

Knowing these root causes helps apply the most effective fix for your Epson Workforce 600.

***Epson Printer Support at 1-866-203-7571**

## **3. Identifying the Type of Paper Jam**

The Epson Workforce 600 can display paper jams in several areas. Here’s how to identify where the jam is located:

| **Location**                        | **Symptoms**                                            |
| ----------------------------------- | ------------------------------------------------------- |
| **Input Tray (Bottom)**             | Paper doesn’t feed, or multiple sheets pulled together. |
| **Rear Access Door**                | Printer stops mid-print, and jam message appears.       |
| **Output Area**                     | Paper crumples or stops before fully exiting.           |
| **Automatic Document Feeder (ADF)** | Jam occurs while scanning or copying multiple pages.    |
| **Internal Roller Path**            | Error persists even after clearing all visible paper.   |

***Epson Printer Support at 1-866-203-7571**

## **4. Step-by-Step Solution for Paper Jam Error**

Follow these systematic steps to clear and fix any paper jam in your Epson Workforce 600 printer.

***Epson Printer Support at 1-866-203-7571**

### **Step 1: Power Off and Unplug the Printer**

1. Turn off your Epson Workforce 600 using the **Power** button.
2. Unplug the printer from the power source.
3. Wait at least **60 seconds** to let internal components reset.
4. Remove all paper from input and output trays.

This prevents further damage and allows safe inspection of internal parts.

***Epson Printer Support at 1-866-203-7571**

### **Step 2: Check the Rear Paper Feed**

The rear paper feed is a common place for jams.

1. Turn the printer around and open the **rear access door**.
2. Gently pull out any jammed sheets. Avoid tearing the paper.
3. Check for small torn pieces left inside.
4. Use a flashlight to inspect the rollers and ensure they’re clean.
5. If needed, use a lint-free cloth lightly dampened with distilled water to clean the rollers.
6. Allow the rollers to dry completely before reassembling.

If the jam persists, move on to the next area.

***Epson Printer Support at 1-866-203-7571**

### **Step 3: Remove Jammed Paper from the Output Tray**

1. Open the front cover and inspect the **output slot**.
2. If paper is stuck halfway, gently pull it **in the direction of paper movement**.
3. Do not pull the paper backward; this can damage the internal mechanism.
4. Check the area for torn paper fragments.

Once cleared, close the cover and move to the next step.

***Epson Printer Support at 1-866-203-7571**

### **Step 4: Inspect the Automatic Document Feeder (ADF)**

The ADF can cause jams during copying or scanning.

1. Lift the ADF cover.
2. Remove any jammed or misfed sheets.
3. Check for dirt, staples, or foreign particles.
4. Wipe the rollers and separator pad with a clean, damp cloth.
5. Let the ADF dry before closing the cover.

If the ADF continues to show jam messages, consider resetting the printer or contacting **support at 1-866-203-7571**.

***Epson Printer Support at 1-866-203-7571**

### **Step 5: Check the Paper Cassette (Bottom Tray)**

1. Pull out the **paper cassette** completely.
2. Check inside the slot for paper debris or obstructions.
3. Remove any jammed or curled paper.
4. Reload the paper stack properly —

   * Fan the sheets to avoid sticking.
   * Do not exceed the maximum fill line.
   * Adjust side guides to fit the paper snugly.
5. Reinsert the tray and make sure it’s fully seated.

***Epson Printer Support at 1-866-203-7571**

### **Step 6: Clean and Inspect Internal Rollers**

If paper jams continue, dirty rollers may be the culprit.

**To clean:**

1. Turn off and unplug the printer.
2. Open all accessible covers (front, rear, ADF).
3. Use a microfiber cloth lightly moistened with distilled water.
4. Gently rotate the rollers while cleaning.
5. Avoid alcohol or chemical cleaners as they may damage rubber parts.
6. Once done, leave the printer open for 10–15 minutes to dry.

Clean rollers ensure proper grip and feeding, preventing future jams.

***Epson Printer Support at 1-866-203-7571**

### **Step 7: Reset the Printer**

After physically clearing the jam, the printer may still display a “Paper Jam” error. A reset usually clears this.

**Reset procedure:**

1. Reconnect the power cable and turn on the printer.
2. Wait for it to initialize.
3. Press the **Setup** button on the control panel.
4. Navigate to **Restore Default Settings → All Settings**.
5. Confirm the reset.

This clears any false jam detection and resets internal sensors.

***Epson Printer Support at 1-866-203-7571**

## **5. Fixing “Paper Jam” Error When No Paper Is Stuck**

Many users experience a **false paper jam** where the printer shows a jam message even when no paper is stuck. Here’s how to handle that:

### **A. Perform a Power Reset**

* Turn off the printer.
* Unplug it from power for 3–5 minutes.
* Press and hold the **Power button** for 10 seconds (discharges residual current).
* Plug back in and restart.

### **B. Clean Paper Sensors**

* Dust or ink buildup on the **optical sensors** can cause false jams.
* Use a soft brush or air blower to remove debris from paper paths.

### **C. Update Firmware**

* Outdated firmware can misread sensor data.
* Visit Epson’s official site → Support → Workforce 600 → Downloads.
* Install the latest **firmware update**.

### **D. Run a Nozzle Check or Paper Feed Test**

* From the printer menu, go to **Maintenance → Paper Feed Test**.
* If the test runs successfully, the issue was likely software-related.

If none of these methods fix the false jam error, contact **1-866-203-7571** for expert troubleshooting.

***Epson Printer Support at 1-866-203-7571**

## **6. Preventive Maintenance Tips**

To keep your Epson Workforce 600 running smoothly, follow these preventive measures:

### **1. Use Quality Paper**

* Always use Epson-recommended paper or high-quality plain paper.
* Avoid damaged, curled, or moist sheets.

### **2. Regular Cleaning**

* Clean rollers and interior components every 2–3 months.
* Avoid overuse of cleaning agents; a damp cloth is sufficient.

### **3. Store Paper Properly**

* Store paper in a cool, dry place.
* Keep it flat to prevent curling.

### **4. Avoid Overloading the Tray**

* Never exceed the maximum capacity line in the paper cassette.

### **5. Update Software Regularly**

* Periodic firmware updates improve printer performance and error detection.

### **6. Power Off When Not in Use**

* Turning off the printer prevents dust accumulation and prolongs component life.

***Epson Printer Support at 1-866-203-7571**

## **7. Software and Firmware-Related Causes**

In some cases, the **Paper Jam Error** may not result from mechanical issues but rather **firmware or driver conflicts**.

### **A. Reinstall Printer Drivers**

1. On your computer, open **Control Panel → Devices and Printers**.
2. Right-click your Epson Workforce 600 → choose **Remove Device**.
3. Visit Epson’s official site → Download section → get the latest driver.
4. Reinstall it on your computer.

### **B. Clear Print Queue**

* Sometimes, a pending print job causes the printer to misreport errors.

1. Open **Control Panel → Devices and Printers**.
2. Right-click the Epson printer → select **See what’s printing**.
3. Cancel all documents.
4. Restart the printer.

### **C. Firmware Update**

* Go to Epson’s support page → Workforce 600 firmware → download and install.
* Follow on-screen instructions carefully.

### **D. Reset via Software Utility**

* Install the **Epson Printer Utility Tool**.
* Use it to reset internal sensors and counters.

If you’re uncomfortable performing these updates manually, the **Epson Support Team at 1-866-203-7571** can assist remotely.

***Epson Printer Support at 1-866-203-7571**

## **8. When to Contact Technical Support (1-866-203-7571)**

If you’ve followed all troubleshooting steps and still face the error, professional help may be needed. Contacting Epson support ensures expert handling of your device.

You should call **1-866-203-7571** if:

* The printer continues to show “Paper Jam” after clearing all paper.
* Rollers or sensors appear damaged.
* The ADF or rear feed mechanism doesn’t function properly.
* The printer displays other error codes (e.g., 0x97, 0xEA, 0xF1) along with the jam message.
* You need help updating firmware or resetting internal components.

Certified technicians at **1-866-203-7571** can:

* Perform remote diagnostics.
* Provide step-by-step guided assistance.
* Arrange for service or replacement parts if required.

***Epson Printer Support at 1-866-203-7571**

## **9. Conclusion**

Paper jams can disrupt your printing workflow, but with the right approach, your **Epson Workforce 600** can be restored to smooth operation quickly. Most jams result from **incorrect paper loading**, **dirty rollers**, or **false sensor triggers** — all of which can be easily fixed by following the steps in this guide.

To summarize:

* Always **turn off and unplug** before removing jammed paper.
* Clean **rollers and sensors** regularly.
* Keep firmware updated.
* Use quality, properly stored paper.
* If problems persist, contact **Epson Printer Support at 1-866-203-7571** for professional help.

By following these methods, you can eliminate the paper jam error and ensure your Epson Workforce 600 delivers consistent, high-quality prints for years to come.

 **Need Immediate Help?**

If you’re unable to resolve the issue yourself or the printer repeatedly shows a “Paper Jam” message even when clear, don’t hesitate — call **1-866-203-7571**.
Expert Epson technicians are available to assist you with advanced troubleshooting and ensure your printer functions perfectly again.


