---
# System prepended metadata

title: 計網實驗--0309實驗三(步驟)
tags: [計網實驗]

---

# 計網實驗--0309實驗三(步驟)
###### tags: `計網實驗`

b0929057 
# 壹、Lab3: Switched LANs--- Lab3概觀

![](https://i.imgur.com/4dw2pz1.png)


* Objective
![](https://i.imgur.com/Knvtgk1.png)


* Overview
![](https://i.imgur.com/1kItV1t.png)

# 貳、Lab3: Switched LANs--- 實驗步驟
## 一、Create a New Project
![](https://i.imgur.com/sRXHcP5.png)

* 圖片
![](https://i.imgur.com/7hfFP9w.png)
* 按完等建造場景
![](https://i.imgur.com/pRYUpvF.png)


## 二、Create a Network
![](https://i.imgur.com/Ph6Qrxg.png)

* 預期圖示

![](https://i.imgur.com/QGd4tAT.png)

* 注意:這次不是選擇Bus, 這次選Star

* 圖片
![](https://i.imgur.com/Z4mrEVi.png)

![](https://i.imgur.com/56qmf3g.png)

修改如下
![](https://i.imgur.com/D6Ge5JF.png)

產生圖片
![](https://i.imgur.com/pN5tY9E.png)

對node16(中心)按右鍵->
![](https://i.imgur.com/bFAC11s.png)

![](https://i.imgur.com/QHpZ2II.png)

存檔

![](https://i.imgur.com/yTjt1eu.png)


## 三、Configure the Network Nodes
![](https://i.imgur.com/DZKYS2r.png)
![](https://i.imgur.com/4Um45pg.png)
![](https://i.imgur.com/c1uh9ko.png)

### 三-- 實作
![](https://i.imgur.com/qZ0zWmL.png)

![](https://i.imgur.com/7mpUcCh.png)

![](https://i.imgur.com/AveegBg.png)

確認無誤

![](https://i.imgur.com/TmJb3Bu.png)

存檔

## 四、Choose Statistics
![](https://i.imgur.com/eLuSML3.png)
![](https://i.imgur.com/KnQUxvy.png)
![](https://i.imgur.com/kQ30sEZ.png)

### 實作
![](https://i.imgur.com/9ipSNZQ.png)

勾選如下

![](https://i.imgur.com/q4STwmS.png)


## 五、Configuration and Run the Simulation
![](https://i.imgur.com/2zYV36s.png)

### 實作
條完duration後按下run
![](https://i.imgur.com/mqfYB0N.png)

## 六、Duplicate the Scenario
![](https://i.imgur.com/2Zqfbhh.png)
![](https://i.imgur.com/cvUOI8C.png)
![](https://i.imgur.com/aZScc8u.png)
![](https://i.imgur.com/oWKdkZP.png)

![](https://i.imgur.com/JVbpL0E.png)

### 六實作
![](https://i.imgur.com/d6eVloh.png)

![](https://i.imgur.com/ymiCvbQ.png)

開啟然後等一下
![](https://i.imgur.com/4tt2PDD.png)

確認都有出現
![](https://i.imgur.com/8HflyjU.png)

開把switch16, hub16拉進來
![](https://i.imgur.com/MnngaTH.png)

把全部的Link改為用10baseT 點選要連結的兩個節點
![](https://i.imgur.com/PASefvN.png)

圖片
![](https://i.imgur.com/SeXWL3y.png)


## 七、Configure and Run the Simulation
![](https://i.imgur.com/nQvxFDj.png)

## 八、View the Results
### 第一種
![](https://i.imgur.com/X0ojKFo.png)
![](https://i.imgur.com/dNNK7kT.png)
![](https://i.imgur.com/aE93CQV.png)
![](https://i.imgur.com/tDVsVTZ.png)
![](https://i.imgur.com/4DFJd1h.png)
![](https://i.imgur.com/WHVKdmq.png)
![](https://i.imgur.com/27I3CBn.png)
![](https://i.imgur.com/IzihMWB.png)

### 第二種(看到他的步驟從7.開始切，應該是其他兩種結果的觀看方式)
![](https://i.imgur.com/RJrtnVY.png)
![](https://i.imgur.com/j5jKMUR.png)

### 八實作
![](https://i.imgur.com/FLf3jxZ.png)

![](https://i.imgur.com/nktJDR7.png)

![](https://i.imgur.com/89DHAYp.png)

![](https://i.imgur.com/jimTgED.png)


# 實驗驗收--- 手冊中Lab3預期樣態
一、	Q1
	
| Traffic Sent v.s. Time | Traffic Recieved v.s. Time |
| -------- | -------- |
| ![](https://i.imgur.com/lSiz8nw.png)| ![](https://i.imgur.com/GfkkHWA.png)|
| Delay v.s. Time     | Collision Count v.s. Time     |
| ![](https://i.imgur.com/EtZWGAX.png)| ![](https://i.imgur.com/wFHWvjB.png) |

 	 
	
 	 

二、	Q2
(無圖)
三、	Q3


| Delay v.s. Time | Throughput v.s. Time |
| -------- | -------- |
| ![](https://i.imgur.com/WesFLOi.png)| ![](https://i.imgur.com/2JI52wg.png)|
| Collision Count v.s. Time(與Q1圖相同)     |      |
| ![](https://i.imgur.com/KlpgOLL.png)|      |

# 問題討論
![](https://i.imgur.com/aNW17EU.png)




# Ethernet Cable



# 驗收
![](https://i.imgur.com/gF5JYSf.png)

Q1
![](https://i.imgur.com/Bl6RLtn.png)

![](https://i.imgur.com/3dNQRi7.png)


![](https://i.imgur.com/jTId5H9.png)

![](https://i.imgur.com/OZ9pbAV.png)


改完hub->switch

![](https://i.imgur.com/K8DW6ML.png)

![](https://i.imgur.com/fzqSSMn.png)

![](https://i.imgur.com/XPHy33R.png)

![](https://i.imgur.com/x5OFrW9.png)

![](https://i.imgur.com/pfAr69Q.png)
